Preparation and characterization of functional group gradient surfaces

Functional group gradient surfaces where the density of functional groups changes gradually along the sample length were prepared. The functional group (? COOH, ? CONH₂, and ? OH group) gradient surfaces were produced by the treatment of low-density PE sheets using a corona with gradually increasing power, followed by the graft copolymerization of acrylic acid and subsequent substitution reaction of carboxylic acid groups to amide or hydroxyl groups. The prepared gradient surfaces were characterized by the measurement of water contact angle, FTIR-ATR, and ESCA. The gradient surfaces prepared can be used to systematically investigate the interactions of biological or other species in terms of the surface functional groups and their density of polymeric materials. © 1994 John Wiley & Sons, Inc.     

材料化学实验课程体系的改革与建设

结合材料化学实验课程自身的特点及材料化学实验教学的经验，系统阐述我院材料化学实验改革的思路，通过深化材料化学实验教学改革，提高任课教师的学术水平，更新教学内容，优化教学模式，推进教材的系统性建设，实现材料化学实验教学质量的提高，激发学生的学习热情与兴趣，进一步培养学生的创新能力。     

一测多评方法应用于高效液相色谱法测定防晒产品中15种防晒剂的含量

选用CAPCELL PAK C18色谱柱为分离柱,柱温为30℃,进样体积为10.0μL,并用不同比例的(A)甲醇、(B)四氢呋喃和(C)0.008 2mol·L^-1高氯酸溶液的混合液作为流动相,按程序梯度洗脱模式对市售防晒产品中所用的15种防晒剂的标准品进行色谱分离,并在波长311nm处进行紫外检测。实样分析时,称取样品0.25g,用甲醇、四氢呋喃、水和高氯酸(体积比为250∶450∶300∶0.2)的混合液(以下简称混合溶剂)15 mL超声提取30 min,用混合溶剂定容至25.0mL,离心10min,分取上清液1.0mL,加入混合溶剂定容至10.0mL,经0.45μm滤膜过滤,取滤液按仪器工作条件进行高效液相色谱分析。结果表明:所测定的15种防晒剂在一定的质量浓度范围内与其对应的峰面积呈线性关系。选定其中的二苯酮-3为参照物,并根据其余14种化合物的质量浓度和峰面积计算了各化合物的相对校正因子和相对保留时间等参数,确定了用一测多评法(QAMS)测定防晒产品中15种防晒剂的条件。还对色谱柱的型号、色谱仪器的型号以及柱温、进样量等对相对校正因子和保留时间可能产生影响的因素进行了系统试验。证明了在选定的色谱柱型号的前提下,用QAMS方法可实现防晒产品中15种防晒剂含量的同时测定。应用QAMS方法测定了6个批次防晒产品中的防晒剂含量,所得结果与用标准曲线法计算的结果基本一致,表明QAMS方法在降低检测成本和节省检测时间方面效果显著。     

Reactions in a Mixture of CH4 and CO2 under the Aciton of Microwave Discharge at Atmospheric Pressure

Reactions between CH4 and CO2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor,The main products were CO and H2,while acetylene and ethylene were also found in the products.Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst,Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.     

PbO~2纳米粉体的固相合成及其对MnO~2电极材料的改性作用

利用固相氧化反应制备了PbO~2纳米粉体样品，借助XRD，TEM以及循环伏安测试对其性质进行了表征。同时，对反应条件的选择进行了讨论。将所得样品用于改性MnO~2电极，恒流放电测试结果表明，样品掺杂量在1.25%～5.00%间对MnO~2有良好的改性效果，可使改性MnO~2的放电容量得到极大提高。循环伏安测试结果表明，铅的掺入改变了MnO~2的放电机理。在循环扫描过程中，掺杂物与MnO~2均不再以单纯氧化物的形式存在，而是形成了一系列Pb(X)(X=0,Ⅱ)Mn(Y)(Y=Ⅳ，Ⅲ，Ⅱ)复合物的共氧化与共还原，抑制了电化学惰性物质Mn~3O~4的生成和积累，从而有望改善MnO~2的可充性能。纳米PbO~2与常粒径PbO~2与常粒径PbO~2(标记为S)对MnO~2的改性机理类似。但前者对MnO~2的改性效果明显优于后者，当恒流放电至-1.0V时，其放电容量较S样改性MnO~2的放电容量平均高出约30%。     

Plasma-Catalytic Decomposition of Phenols in Atmospheric Pressure Dielectric Barrier Discharge

This study investigated the processes for the destruction of phenol and its derivatives (resorcin and pyrocatechol) in aqueous solutions under the action of an oxygen dielectric barrier discharge (DBD) at atmospheric pressure in the presence or absence of catalysts in the plasma zone. It was shown that the DBD had a high decomposition efficiency for phenol and its derivatives (up to 99%). Phenol was the most stable and pyrocatechol was the least. In a plasma-catalytic hybrid process, the effective rate constants for phenol, resorcin and pyrocatechol decomposition were 11, 4 and 2.5 times higher, respectively, than those for the DBD treatment without catalysts. The process also resulted in a 1.4, 1.6 and 1.2 times higher rate of carboxylic acid formation for phenol, resorcin and pyrocatechol, respectively. The fractional conversion into the respective carboxylic acids reached 56% for phenol and 68% for resorcin and pyrocatechol.     

Production of N,H, and NH active species in N2-H2 dc flowing discharges

Densities of N, H, and NH active species have been detected by laser-induced fluorescence (LIF) in N₂-xH₂ dc flowing discharges. A peak value of N atom densities far x = 0.2–0.5% and a plateau value of H atom densities between x = 1% and 90% in post-discharge conditions (0.05 sec, p = 2 torr) has been found. Comparison between LIF measurements of N atoms and the trend of the N₂(B, v = II) population shows that the emission from this state can be used for monitoring N atoms. The NH radical has only been detected inside the discharge region.On leave from Instituto Tecnológico de Aeronáutica, CNPq, Brazil.     

激光拉曼光谱在高分子中的应用

论述了激光拉曼光谱对高分子结构、结晶形态和表征,反应动力学过程和取向的研究,还介绍了纵向声学模、共振、高温高压、光波导和付里叶拉曼光谱在高分子研究中的最新进展。     

Ligand-protein docking using a quantum stochastic tunneling optimization method

A novel hybrid optimization method called quantum stochastic tunneling has been recently introduced. Here, we report its implementation within a new docking program called EasyDock and a validation with the CCDC/Astex data set of ligand-protein complexes using the PLP score to represent the ligand-protein potential energy surface and ScreenScore to score the ligand-protein binding energies. When taking the top energy-ranked ligand binding mode pose, we were able to predict the correct crystallographic ligand binding mode in up to 75% of the cases. By using this novel optimization method run times for typical docking simulations are significantly shortened.     

CoTiO3纳米粉体的合成及其对MnO2电极材料的改性作用

采用溶胶-凝胶法制得钙钛矿型CoTiO₃纳米粉体，借助XRD、TEM以及循环伏安测试对其性质进行了表征。不同量的所制样品用于MnO₂电极的物理掺杂，进行了深度恒流放电、循环伏安和充放电测试。结果表明在40%KOH电解质溶液中，样品掺杂量为5%时改性效果较好。纳米CoTiO₃参与了电极反应，抑制了电化学惰性物质Mn₃O₄的生成，从而有效地改善MnO₂的放电性能，放电容量较I.C