Dipole moments and structure of poly(epoxypropylcarbazole)

The mean-square molecular dipole moments 〈μ²〉 of carbazole, N-ethylcarbazole and of the sequence of poly(epoxypropylcarbazole) (PEPCa) oligomers of various molecular weights have been evaluated in solutions of these organic compounds in dioxan. For PEPCa the values of 〈μ²〉 have also been determined in the solid state. On the basis of the experimental results and of molecular mechanics calculations it has been shown that the orientation of the lateral group of PEPCa favors noninteracting racemic dyads. The temperature-dependence of the effective dipole moment of solid PEPCa follows the Onsager theory above 295 K.     

Effect of Inorganic Ions on Oleate Adsorption at a Nigerian Hematite–Water Interface

Using “pure” natural hematite selected from a high silica Nigerian hematitic ore, oleate adsorption densities at the hematite–water interface were determined in the presence of various inorganic ions (anions and cations) of different charges and at varying concentrations. Adsorption density was determined using electrical conductivity measurements. The specific surface area of the hematite particles was determined using the method of adsorption of paranitrophenol in aqueous solution. Inorganic ions in solution depressed oleate adsorption at the aqueous hematite surface. The charge of the ion proved to be the dominant factor determining the depression of oleate adsorption. Ionic strength also was an influence, up to a limiting value at which monolayer oleate coverage of the hematite surface occurred. The inorganic ions in solution are considered to function through nonspecific adsorption in the diffuse region of the electric double layer.     

薄层色谱-紫外可见分光光度法同时测定食品中的苏丹红Ⅰ～Ⅳ

建立了测定食品中苏丹红色素含量的新方法——薄层色谱-紫外可见分光光度法,对影响测定的因素如样品预处理方式、展开剂等进行了讨论,检测苏丹红Ⅰ~Ⅳ的线性范围分别为0.5~14μg/mL,0.5~10μg/mL,0.5~15μg/mL,0.5~15μg/mL,线性相关系数均为0.999,检出限均为0.05μg/mL。该方法测定结果与国家标准方法测定结果基本一致。     

Enthalpies of mixing of <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">m</Emphasis>-isomers at 298.15 K

Excess enthalpies (H ^E) of 17 binary mixtures of o- and m-isomers of dichlorobenzene, difluorobenzene, methoxymethylbenzene, dimethylbenzene, dimethoxybenzene, aminofluorobenzene, fluoronitrobenzene, diethylbenzene, chlorofluorobenzene, fluoroiodobenzene, bromofluorobenzene, chloromethylbenzene, fluoromethylbenzene, bromomethylbenzene, iodomethylbenzene, fluoromethoxybenzene, dibromobenzene at 298.15 K were measured. All excess enthalpies measured were very small, and those of o-+m-isomers of aminofluorobenzene, dibromobenzene and iodomethylbenzene were negative but 14 other binary mixtures of isomers were positive over the whole range of mole fractions. H ^E of o-+m-isomers of dimethoxybenzene showed the largest enthalpic instability and those of aminofluorobenzene showed the largest enthalpic stability. There was a correlation between dipole–dipole interaction, dipole–induced dipole interaction or entropies of vaporization and excess partial molar enthalpies at infinite dilution.     

四元缔合物体系薄层树脂相分离与光度法联用测定痕量钴

提出了在酸性条件下 (pH=5.0),利用阳离子交换树脂-丁二酮肟-碘-钴四元体系,通过薄层树脂相光度法测定钴的新方法。本法灵敏度高 (e454=1.7105L/molcm),比水相光度法提高14倍,精密度理想 (测定2.0礸/ml Co(II) 6次,RSD=1.3%),选择性好。实测药品VB12及天然水中钴,线性范围0.024~2.0礸/ml (定容50ml),检出限10.4ng/ml。     

Double Electric Layer on Liquid Sn-Ga Alloy in Acetonitrile Solutions of Electrolytes

The structure of the double electric layer (DEL) on a liquid dropping Sn-Ga electrode containing 8 at. % of Sn is studied in acetonitrile (AN) solutions of electrolytes. It is shown that the transition from aqueous to AN solutions of electrolytes makes it possible to expand the region of investigation of parameters of DEL on an Sn-Ga electrode from negative charges to a zero charge and to small positive charges. As follows from the obtained data, throughout the entire interval of charges studied, an excess, as compared with an Hg electrode, chemisorption interaction (Sn-Ga)-AN is absent. It is established that the distance of the closest approach of AN dipoles to an ionic core increases upon going from Hg to Sn-Ga to Ga. The Ga, Bi-Ga, and Sn-Ga electrodes, which possess close values of the “electrochemical work function,” are used as an example to show that the metal-solvent chemisorption interaction increases with decreasing distance of the closest approach of its dipoles to the ionic core of the metal. The effect of this factor becomes stronger as the donor number of the solvent increases.     

薄层层析法分离菊芋汁中低聚糖

采用薄层层析法(TLC)分离菊芋汁中的低聚糖成分。固定相为硅胶板GF254,展层剂为V正丁醇∶V异丙醇∶V乙酸∶V水=7∶5∶2∶4,显色剂为苯胺(4 mL)-二苯胺(4 g)-磷酸(20 mL)(溶于200 mL丙酮中)试剂。该展层体系可用于快速层析分离菊芋汁中的混合低聚糖,经过两次展层可达到良好分离结果。     

Dual microband electrodes: current distributions and diffusion layer ‘titrations’. Implications for electroanalytical measurements

The simulation of transport to double microband electrodes in generator–collector mode is reported focusing especially on the ‘titration curve’ approach to electroanalysis in which a titrant is electrogenerated from a redox active precursor on the generator electrode and reacts homogeneously with the target analyte. The current on the detector electrode reflects the amount of titrant ‘surviving’ passage between the two electrodes. The form of the titration curve – plots of detector current as a function of generator current – is shown to be highly sensitive to the electrode kinetics of the redox couple driven at the generator electrode. Accordingly the naïve use of such methodology for analysis without accompanying simulation and kinetic analysis is fraught with danger. Use of the conformal mapping approach in combination with the ADI method for investigation of the ‘titration’ current distributions at the double band system gives fast and precise simulation of this and similar problems. Convergence analysis is described which allows for the automatic selection of the simulation grid size so as to obtain a chosen accuracy (for example 1%) of the current for all experimentally meaningful values of the geometrical and physico-chemical parameters of the system to be investigated.     

Scratch and Abrasion Resistant Coatings on Plastic Lenses—State of the Art,Current Developments and Perspectives

The manufacturing of ophthalmic lenses is one of the most important markets worldwide and, therefore, strong research efforts are undertaken to continuously improve the quality of the products, either silicate glasses or organic polymer lenses. Hybrid sol-gel based materials play a major role in this highly competitive field and have contributed significantly to the commercial success of the organic base materials. Recent developments concern fast curing and patternable coatings that might soon become part of this business. The compatibility of hybrid sol-gel materials either with organic dyes or with inorganic vacuum borne coatings offers further possibilities to develop highly sophisticated lenses meeting not only customer needs like perfect corrective function, high optical quality and protection, but also high durability as well as cosmetic and decorative aspects. An overview and a few recent developments are outlined below.     

Influence of Urbach Energy,Temperature, and Longitudinal Position in the Active Layer on Carrier Diffusion Length in Perovskite Solar Cells

The diffusion length of charge carriers in the active layer of a perovskite solar cell (PSC) of the structure Glass/PEDOT: PSS/CH₃NH₃PbI₃/PC60BM/Al is modelled. It is found that the diffusion length depends on the position x in the active layer measured from the PEDOT: PSS interface, Urbach energy and temperature. By varying the voltage in the range from zero to , it is shown that the dependence of diffusion length on the position x in the active layer reduces at higher voltage. The combined influence of applied voltage and temperature on the diffusion length of charge carriers is investigated and it is found that in the low voltage range the diffusion length is temperature independent, but it becomes significantly temperature dependent at higher voltages. Also, it is found that the diffusion length decreases as the applied voltage increases and this reduction becomes much more significant at higher voltage and temperatures. The combined influence of applied voltage and Urbach energy on diffusion length of charge carriers reveals that the diffusion length decreases when both the applied voltage and Urbach energy increase. However, the reduction in the diffusion length due to the increase in Urbach energy becomes less significant at higher voltage.