一种高性能数字显微图像分析系统

给出了基于Windows操作系统的24位真彩色通用的高性能显微图像检测与分析软件系统，它采用先进的图像处理和形态分析算法，能对各种显微图像进行处理、分析和检测；并具有友好的操作界面、性能稳定等特点，可为材料、冶金、医药、生物、化工等相关领域的用户提供便捷的显微图像分析及处理测量工具。     

双金属氰化络合物催化剂的形态及其对催化剂活性的影响

合成了多个基于钴氰化锌的双金属氰化络合物(DMC)催化剂,并对催化剂的结晶形态进行了表征.考察了制备过程中,有机配体及其引入方式,温度,搅拌速度对DMC催化剂形态的影响.其中有机配体对DMC催化剂形态的影响是最主要的.有机配体中富电子原子的电负性的强弱和数量共同影响着DMC催化剂的形态.该类原子的电负性越强,得到的DMC催化剂的结晶性越差,无定型部分的比例越高,并且单个原子的电负性强弱比该类原子的数量在此间的影响更大.而在有机配体预先存在的情况下,该沉淀体系则更有利于无定型部分的产生.在30℃左右的沉淀反应温度下,得到的DMC催化剂的无定型部分比例最高.在有机配体存在的情况下,搅拌速度对DMC催化剂形态的影响有限.并且发现存在于有机配体中的DMC催化剂随着时间的推移,形态会发生变化.初步揭示了DMC催化剂的形态与其催化活性间的关系.而无定型态的DMC催化剂更有利于PO的聚合.     

Morphology and spectral properties of thin films of benzoxazole derivatives of biphenyl

We have studied the spectral properties and morphology of thin films (TVD films) formed by thermal vacuum deposition of 4,4′-bis[(E)-1-(1,3-benzoxazol-2-yl)-2-ethenyl]-1,1′-biphenyl and its substituted derivatives. We have shown that introducing bulky 2,2′-oxyhexyl substituents into the biphenyl units leads to a shift of the fluorescence maximum for the TVD films toward shorter wavelengths, a decrease in their photostability, and aggregation of the films during storage. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 3, pp. 300–303, May–June, 2007.     

Cellulose-based fibers from liquid–crystalline solutions. II. Processing and morphology of acetate/butyrate esters

Fibers were spun from isotropic and anisotropic dimethylacetamide solutions of cellulose esters. Take-up speeds of the dry jet/wet spinning process varied. Water served as the coagulant. The mechanical properties of the fibers increased as spinning progressed from the isotropic to the anisotropic state of the solution. A trade-off in solubility and fiber properties was noted as the butyryl acetyl ratio decreased. Whereas high butyryl content enhances both overall solubility and the formation of liquid–crystalline solutions at lower concentration, it results in lower fiber modulus and strength. Morphology of the fibers depended on the coagulation rate which was influenced by the concentration of the sppinning solution. The level of orientation and crystallinity of the fibers increased somewhat when they were spun from liquid-crystalline solutions. © 1993 John Wiley & Sons, Inc.     

Three-dimensional structure of the calcite-water interface by surface X-ray scattering

The three-dimensional structure of the calcite (104)-water interface has been determined with surface X-ray scattering. Nine crystal truncation rods (including specular and non-specular rods) were measured providing both vertical and lateral sensitivity to the interfacial structure. The results reveal that calcite is nearly ideally terminated with a single surface hydration layer that includes two inequivalent water molecules having distinct heights of 2.3 ± 0.1 and 3.5 ± 0.2 Å, each with a well-defined lateral registry with respect to the calcite surface. No additional layering of water is observed beyond this surface hydration layer. Small displacements in the outer two calcium carbonate layers were also observed. These results are compared with previous experimental and computational results.     

Molecular scale structure formation by folding

A conception of a structure formation suitable for nano-technology is proposed, which is programmable and suitable for mass production-like lithography. This conception utilizes the controlled folding of chains like the scan-lines of television. Its possibility and property were studied theoretically using the modeled chains consist of beads. By adopting the interaction among the beads which can distinguish the kind of the partner by its polarity and is chiral to break the chiral symmetry of the folded state, the special chains which have the unique ground states could be designed. In these ground states, the chains are folded like the scan-lines of television. The thermodynamic properties of the suggested chains were studied by the Monte Carlo simulations and the suggested chains showed the phase-transition-like behavior which is distinct compared to both the random chains and the chain that has only the non-specific attraction. The size dependence and the effects of adding the non-specific attraction and modifying the border of the folded conformation were also studied.     

Potential-dependent structure of the interfacial water on the gold electrode

Doubly tunable sum frequency generation (SFG) spectra demonstrate that the water molecules at gold/electrolyte interface change their orientation with applied potential. At negative potentials, water molecules in the double layer align with their oxygen atom pointing to the solution. As potential became positive to be close to the potential of zero charge (PZC), the SFG signal decreased, suggesting the OH groups of the water molecule are either in random orientation or parallel to the electrode. As potential became more positive than the PZC, the SFG signal increased again with the oxygen-up orientation as same as in the negative potential region, indicating that water molecules interact with the adsorbed sulfate anions. The peak position of the SFG spectra indicates a relatively disordered state of water molecules at the gold electrode surface, in contrast to the previously observed ice-like structure of water at electrolyte/oxide interfaces.     

含三个硬脂酰胺基的树枝状季铵盐的制备

由三羟甲基丙烷三丙烯酸酯(TMPTA)和乙二胺(EDA)直接进行M ichael加成反应,合成端基为3个NH2的树枝状大分子G(NH2)3,用硬脂酰氯将其端氨基进行酰胺化得到端基为3个硬脂酰基的树枝状大分子GS(R)3,产率为82.4%。GS(R)3进一步与碘甲烷反应,其分子中的3个仲氨基被季铵化,生成树枝状季铵盐GI(R)3,产率为82.0%。讨论了反应温度、反应时间和原料配比对GS(R)3和GI(R)3产率的影响,并用红外、核磁和元素分析对GS(R)3和GI(R)3的结构进行表征。     

Chemical synthesis of p-type nanocrystalline copper selenide thin films for heterojunction solar cells

Nanocrystalline thin films of copper selenide have been grown on glass and tin doped-indium oxide substrates using chemical method. At ambient temperature, golden films have been synthesized and annealed at 200 °C for 1 h and were examined for their structural, surface morphological and optical properties by means of X-ray diffraction (XRD), scanning electron microscopy and UV-vis spectrophotometry techniques, respectively. Cu_2−xSe phase was confirmed by XRD pattern and spherical grains of 30 ± 4 - 40 ± 4 nm in size aggregated over about 130 ± 10 nm islands were seen by SEM images. Effect of annealing on crystallinity improvement, band edge shift and photoelectrochemical performance (under 80 mW/cm² light intensity and in lithium iodide electrolyte) has been studied and reported. Observed p-type electrical conductivity in copper selenide thin films make it a suitable candidate for heterojunction solar cells.