利用宽带音频扫描加载实现复合材料结构质量检测的数字散斑错位术研究

本文系统地分析了数字散斑错位术相关条纹的形成机理，并结合此项技术提出一种新的加载方式——宽带音频扫描加载，同时从理论上剖析了该加载方式的可行性，从而构造出一种新的无损测试系统．采用该检测系统对带有预制不同形状和尺寸缺陷的复合材料模型进行检测验证，发现该技术使用方便，检测时不受环境的影响，可以实现现场在线原位实时检测，并能够得到非常真实的检测结果，从而可以实现更为精确的定量计算．     

纤维复合材料损伤过程的数值模拟

利用界面断裂力学和有限元法数值模拟纤维增强复合材料的细观损伤过程，研究各种主要破坏模式之间的相互转变和影响，指出以断裂能和混合度表示的界面性能是控制复合材料损伤过程的主要细观参数。分析了界面韧度对破坏性能的影响，探讨了基于破坏模式控制的复合材料韧度设计的新途径。     

Non-linear strain rate dependent micro-mechanical composite material model for finite element impact and crashworthiness simulation

The present study aims at implementation of a strain rate dependent, non-linear, micro-mechanics material model for laminated, unidirectional polymer matrix composites into the explicit finite element code LSDYNA. The objective is to develop an accurate and simple micro-mechanical, rate dependent material model, which is computationally efficient. Within the model a representative volume cell is assumed. The stress-strain relation including rate dependent effects for the micro-model is derived for both shell elements and solid elements. Micro-failure criterion is presented for each material constituent and failure mode. The implemented model can deal with problems such as impact, crashworthiness, and failure analysis under quasi-static loads. The developed material model has a wide range of applications such as jet engine jackets, armor plates, and structural crashworthiness simulation. The deformation response of two representative composite materials with varying fiber orientation is presented using the described technique. The predicted results compare favorably to experimental values.     

Hill condition and overall properties of composites

Summary We discuss the Hill principle's role and applications in modern micromechanics of industrial composite materials. Uniform boundary conditions, fundamental in micromechanics, are introduced as a class of Hill solutions. Mixed uniform conditions, basic for experimental testing, are analysed. Domains of application of the Hill principle are reviewed, like homogeneization of heterogeneous media, definition of effective properties and size effect in heterogeneous materials. Generalization of the Hill condition is realized for arbitrary materials, in particular for nonlinear inelastic composites with imperfect interfaces. Received 9 September 1997; accepted for publication 23 December 1997     

Microstructure and fracture characteristic of Mg–Al–Zn–Si3N4 composites

Magnesium matrix composites reinforced by three dimensional (3-D) network structure were fabricated by pressure-less infiltration technology. The 3-D network structure reinforcement and its composites exhibited special topology structure and different fracture characteristic. Metal matrix fractured in a ductile mode is manifested by small dimples and craters on the fracture surface. When the volume fraction of reinforcement is not in excess of 6%, the composite had an improved fracture toughness. This is because of the relatively homogeneous Si₃N₄ particles distributed in the metal matrix and the occurrence of interface reaction product such as MgAlO₂ spinel phase. With the increases of volume fraction of reinforcement (>6%), the fracture toughness decreases slowly at the initial stages and then decreases rapidly towards the end. Therefore, the main fracture failure mechanisms consist of crack nucleation, growth, coalescence and crack propagation.     

双向固定网格渐进结构优化方法

近年来发展的渐进结构优化方法是一种有前途的结构拓扑和形状优化方法.本文在渐进结构优化方法的框架内建立了统一敏感度的概念,并基于固定网格有限元技术,发展了一种新的增加材料技术,提出了双向固定网格渐进结构优化方法.将该方法应用于复合材料壳结构开孔形状优化,以孔周等Tsai-Hill强度值作为优化目标,可以得到合理的最优解,证明了双向固定网格渐进结构优化方法的适用性.不同的初始点能得到几乎相同的最优解,展示了本文方法良好的全局最优性.     

复合材料Ⅰ型层间断裂韧性GIC和初始裂纹长度

从经典梁理论和弹性基础上的正交各向异性梁理论出发，分析了梁的弯曲剪切效应和弹性基础对用双悬臂梁试件测得的复合材料层合板Ⅰ型层间断裂韧性Ｇ＿（ＩＣ）的影响，发现当试件的初始裂纹长度较短时，剪切效应和弹性基础对Ｇ＿（ＩＣ）的影响是显著的，建议将初始裂纹长度取５０毫米。实验结果表明，初始裂纹长度由２０毫米增加到５０毫米时，测得的Ｇ＿（ＩＣ）值的离散系数降低２０％～４０％，数据趋于稳定，分散性减小。     

Nonlinear composites: a linearization procedure,exact to second-order in contrast and for which the strain-energy and affine formulations coincideComposites non linéaires : un schéma exact au second ordre pour lequel la formulation en énergie de déformation coı̈ncide avec la formulation affine

This Note presents a new approximate scheme for nonlinear composites. The approximation which is made preserves certain features of the original second-order scheme of Ponte Castañeda, exactness to second-order in the contrast and existence of an effective energy, but improves on one drawback, which is the gap between the strain-energy formulation and the affine formulation. A numerical example shows the accuracy of the present method. To cite this article: N. Lahellec, P. Suquet, C. R. Mecanique 332 (2004).     

涂层球粒复合材料热弹性的特定性质

在所提出的基体均匀场概念的基础上，导出了涂层球粒增强复合材料等效热弹性性质的精确关系     

张量多项式强度准则相互作用系数实验确定方法

本文对用双向应力实验确定复合材料强度的张量多项式准则相互作用系数进行了理论分析,提出用两个方向单向强度的比值作为双向加载的应力比最为合适,这时双向强度实验引起的误差对相互作用系数 F_(12)影响最小.