Nanoscratch-induced deformation behaviour in B4C particle reinforced ultrafine grained Al alloy composites: a novel diagnostic approach

We report on the novel application of nanoscratch characterization to provide insight into the plasticity mechanisms responsible for the behaviour of composites. Accordingly, we conduct deformation characterization with nanoscratch testing (DCNT) to study the deformation behaviour of two B₄C reinforced ultrafine grained Al alloy tri-modal composites with average B₄C particle sizes of ~1–6?μm and ~500?nm, respectively. To highlight the type of mechanistic information revealed in a DCNT study of composites, we concentrate on the influence of B₄C particle size on deformation mechanisms.     

New trends in polylactide (PLA)-based materials: “Green” PLA-Calcium sulfate (nano)composites tailored with flame retardant properties

Starting from gypsum, a by-product of lactic acid fabrication process, novel “green” composites have been produced by melt-blending polylactide (PLA) and this filler after a previous specific dehydration to obtain anhydrite II (AII). Such a material is potentially interesting in biodegradable/rigid packaging and in technical applications requiring rigidity, heat resistance and dimensional stability. In order to obtain PLA-AII composites characterized by specific end-use flame retardant properties, the addition of selected organo-modified layered silicates (OMLS) was considered. Co-addition of AII and OMLS leads to PLA (nano)composites characterized by good (nano)filler dispersion, thermal stability and adequate mechanical resistance. The flame retardant properties as shown by cone calorimetry showed significant increase in the ignition time compared to neat PLA and a substantial decrease, i.e., ca. 40%, of the maximum rate of heat release, whereas the UL94 HB test was successfully passed revealing non-dripping effect and extensive char formation. The study represents a new approach in formulating novel PLA grades with improved characteristic features.     

Thermo-oxidation behaviour of composite materials at high temperatures: A review of research activities carried out within the COMEDI program

The present paper presents a review of the main activities carried out within the context of the COMEDI research program, a joint collaboration involving three research teams focusing on the thermo-oxidation behaviour of composite materials at high temperatures.The scientific aim of the COMEDI research program was to better identify the link between the physical mechanisms involved in thermo-oxidation phenomena: oxygen reaction-diffusion, chemical shrinkage strain/stress, degradation at different scales and to provide tools for predicting the thermo-oxidation behaviour of composite materials under thermo-oxidative environments including damage onset.This aim was accomplished by investigating experimentally the thermo-oxidation behaviour of pure resin samples - both industrial and “model” materials - and by interpreting the results by a coupled reaction-diffusion-mechanics multiphysics model.A dedicated numerical model tool has been developed and implemented into the ABAQUS^® finite element commercial software. This tool was employed to simulate the thermo-oxidative behaviour of a fibre-matrix microscopic representative composite cell.Finally, the model predictions for the composite have been validated by comparing the experimental and the simulated local matrix shrinkage displacements and the mass loss of composite specimens.     

Annealing effect in glass woven fabric composites,Part II. Bending properties

Effects of annealing on bending properties of composites reinforced with plain glass woven fabrics that were treated with different concentrations of silane coupling agent were investigated in this paper. Bending strength increased by annealing in the specimen treated with lower silane concentration. Higher annealing temperature in a range from 80°C to 150°C led to higher bending strength. Then, the fracture mode changed from a micro-crack type (low strength type) to a branched matrix crack type (high strength type) by annealing.     

Modified null field method for P- and SV-wave scattering from a partially debonded fiber

The modified null field approach to elastic P- and SV-wave scattering (in plane strain) from a partially debonded fiber has been developed. The debonded region on the fiber surface is subjected to traction free boundary conditions, whereas the fiber is assumed to be in welded contact with the host medium elsewhere. Additional null field equations for an elliptical extension of the actual surface of the scatterer are introduced which require additional expansions for the field in the region between the extended mathematical boundary and the actual boundary of the scatterer. The numerical accuracy of the modified null field method has been tested for the case of a perfectly bonded fiber for P- and SV-wave incidence. Scattering cross-section plots are presented for different degrees of debonding.     

Anchorage strength models for end-debonding predictions in RC beams strengthened with FRP composites

The increase in the flexural capacity of RC beams obtained by externally bonding FRP composites to their tension side is often limited by the premature and brittle debonding of the external reinforcement. An in-depth understanding of this complex failure mechanism, however, has not yet been achieved. With specific regard to end-debonding failure modes, extensive experimental observations reported in the literature highlight the important distinction, often neglected in strength models proposed by researchers, between the peel-off and rip-off end-debonding types of failure. The peel-off failure is generally characterized by a failure plane located within the first few millimetres of the concrete cover, whilst the rip-off failure penetrates deeper into the concrete cover and propagates along the tensile steel reinforcement. A new rip-off strength model is described in this paper. The model proposed is based on the Chen and Teng peel-off model and relies upon additional theoretical considerations. The influence of the amount of the internal tensile steel reinforcement and the effective anchorage length of FRP are considered and discussed. The validity of the new model is analyzed further through comparisons with test results, findings of a numerical investigation, and a parametric study. The new rip-off strength model is assessed against a database comprising results from 62 beams tested by various researchers and is shown to yield less conservative results. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 373–388, May–June, 2008.