Various ways to strengthen the fiber‐matrix interface for enhanced composite performance

Surface treatment (ST) of carbon fibers (CF) leads to an enhancement in fiber‐matrix adhesion. However, it deteriorates the strength of a fiber which makes its reinforcing action less effective in a composite. These effects in opposite directions control the net strength of a composite, and hence, the treatment has to be judiciously applied, which would enhance the first factor and minimize the second one. Authors have recently reported on four effective techniques (using various doses) such as treatments with nanoparticles of Ytterbium fluoride (YbF₃)_, cold remote nitrogen–oxygen plasma (CRNOP), γ‐ray irradiation and nitric acid oxidation. Amongst these methods, nitric acid oxidation is studied in depth in the literature, and γ‐ray irradiation is sparingly studied. However, nano‐YbF₃ and CRNOP were first time reported in the literature by the authors. However, comparative aspects of all these methods were not addressed. In this paper, these aspects in details are discussed to lay down the right criteria for selection of a ST technique of CF to design the desired performance of a composite. The composites with polyetherimide and treated CF (including untreated) were developed and evaluated for various properties including tribological one. Treated CF based composites exhibited excellent mechanical and tribological properties (under harsh operative conditions with wear rates ≈ 1 × 10^?15 m³/Nm and μ ≈ 0.09). It was concluded that for strength and tribo‐performance, different treatments and doses are to be employed. Overall nanosized‐YbF₃ treatment of CF proved to be the most promising ST method. Copyright © 2013 John Wiley & Sons, Ltd.     

Influence of AC Electric Field on Macroscopic Network of Carbon Nanotubes in Polystyrene

CVD‐grown multiwall carbon nanotubes are dispersed in styrene monomer. During the polymerization of styrene, an AC electric field is applied to induce the CNTs to align along the electric field line to form a macroscopic nanotube network in polystyrene matrix. The dielectrophoresis force and the electric field redistribution at the CNTs apexes are responsible for alignment of the CNTs as well as bonding between the CNTs. Parameters such as field strength and nanotube weight fraction are varied. The results indicate that the macroscopic CNTs alignment along electric field direction can be observed only if the AC voltage reaches or is higher than certain values, and the higher the electric field frequency is, the more uniformly the CNTs align along electric field direction. In addition, nanotube concentration also affects the alignment of CNTs. According to the results of this study, the CNTs will align into a developed network in polystyrene matrix under a proper combination of three parameters of the electric field voltage, frequency, and the CNTs concentration.     

Preparation and Characterization of the Hybrids Containing Silica Nanoparticles by Sol-Gel Crosslinking Process

The organic/inorganic hybrid nanomaterials containing silica nanoparticles are synthesized by sol-gel crosslinking process. The tetraethoxysilane (TEOS) and γ-aminopropyltriethoxylsilane as coupling agents are used as a precursor. The 2,4,6-tri [(2-epihydrin-3-bimethyl-ammonium)propyl]-1,3,5-triazine chloride (Tri-EBAC) as crosslinking agent is used to form covalent bonds among the inorganic nanoparticles. The chemical and morphological structures of the organic/inorganic hybrid are characterized with FTIR spectra, ²⁹Si-NMR, x-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and atomic force microscope (AFM). The results show that the organic/inorganic hybrid forms covalent bond between the inorganic nanoparticle and Tri-EBAC. The network organic/inorganic hybrid can form good film with even nanometer particles. The network organic/inorganic hybrids nanomaterial not only exhibits the thermal properties of inorganic compounds, but also exhibits the thermal properties of organic polymer.     

Nonlinear current-voltage characteristics of conductive polyethylene composites with carbon black filled pet microfibrils

Current-voltage electrical behavior of in situ microfibrillar carbon black (CB)/poly(ethylene terephthalate) (PET)/polyethylene (PE) (m-CB/PET/PE) composites with various CB concentrations at ambient temperatures was studied under a direct-current electric field. The current-voltage (I-V) curves exhibited nonlinearity beyond a critical value of voltage. The dynamic random resistor network (DRRN) model was adopted to semi-qualitatively explain the nonlinear conduction behavior of m-CB/PET/PE composites. Macroscopic nonlinearity originated from the interfacial interactions between CB/PET micro fibrils and additional conduction channels. Combined with the special conductive networks, an illustration was proposed to interpret the nonlinear I-V characteristics by a field emission or tunneling mechanism between CB particles in the CB/PET microfibers intersections.     

Synthesis and Properties of Oval‐Shaped Iron Oxide/Ethylene Glycol Mesostructured Nanosheets

We have demonstrated a new and facile bottom‐up protocol for the effective synthesis of oval‐shaped iron oxide/ethylene glycol (FeO_x/EG) mesostructured nanosheets. Deprotonated ethylene glycol molecules are intercalated into iron oxide layers to form an interlayer distance of 10.6 Å. These materials display some peculiar magnetic properties, such as the low Morin temperature T_M and ferromagnetism below this T_M value. CdSe/ZnS nanoparticles can be loaded onto these mesostructured nanosheets to produce nanocomposites that combine both magnetic and fluorescence functions. In addition, iron oxide/propanediol (or butanediol) mesostructured materials with increased interlayer distances can also be synthesized. The developed synthetic strategy may be extended toward the creation of other ultrathin mesostructured nanosheets.     

Water‐Dependent Optical Activity Inversion of Chiral DNA–Silica Assemblies

Chirality is widely found in nature and is expressed hierarchically in many organic–inorganic hybrid materials. Optical activity (OA) is the most fundamental attribute of these chiral materials. In this study, we found that the OA of impeller‐like chiral DNA–silica assemblies (CDSAs) was inverted with the addition of water. The state of DNA under dry and wet conditions, and the dual chirality of chiral DNA layers and twisted helical arrays of opposite handedness in CDSAs were considered to exert predominant effects on the OAs. The circular dichroism (CD) responses for the dry CDSAs were mostly attributed to the chiral arrangement of DNA layers, whereas the opposite CD responses for the wet CDSAs primarily originated from twisted helical arrays of DNA molecules. The observed CD signals were a super‐position of the two opposing OA responses. The increase in the longitudinal relation of DNA molecules due to the recovery of a double‐helical structure of DNA in the presence of water was considered to be the reason for the increase in intensity of the CD signals that originated from the twisted helical array, which led to the inversion of OA of the CDSAs. The inversion of the plasmon‐resonance‐based OAs for the chiral‐arranged achiral Ag nanoparticles (NPs) located in the channels of the CDSAs in dry and wet states further confirmed the dual chirality of DNA packing. Such research on DNA assemblies and metal NPs with dual, opposite chirality assists in the understanding of DNA hierarchical chirality in living systems and the creation of macroscopic ordered helical materials and biosensors.     

微波辅助合成石墨烯/氧化镍复合材料及其表征

本文通过微波辅助的方法,快速而有效地在热膨胀石墨烯(RG)的缺陷上原位合成氧化镍纳米颗粒,形成石墨烯/氧化镍复合材料(RG/NiO)。利用X-射线衍射(XRD),拉曼光谱(Raman),傅里叶变换红外(FTIR),扫描电镜(SEM),透射电镜(TEM),热重-差热(TGA-DSC)对所制备样品的结构、形貌和NiO含量在复合材料中的含量进行表征。结果表明,热膨胀石墨烯层数约7~8层,层间距约为0.35nm,缺陷多,在水热和微波处理后抗氧化性明显变差。复合材料中氧化镍颗粒平均粒径为25nm,均匀而密集地分散在石墨烯平面上,同时在复合材料中的含量为19.8%。     

Synthesis and performance of electroless Ni–P–TiCN composite coatings on Al substrate

Electroless Ni–P and Ni–P–TiCN composite coatings have been deposited successfully on Al substrates. Scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) techniques were applied to study the surface morphology and the chemical composition of the deposited films. Moreover, X‐ray diffraction (XRD) proved that Ni–P and Ni–P–TiCN deposits have amorphous structures. The properties of Ni–P–TiCN/Al composite films such as hardness, corrosion resistance and electrocatalytic activity were examined and compared with that of Ni–P/Al film. The results of hardness measurements reveal that the presence of TiCN particles with Ni–P matrix improves its hardness. Additionally, the performance against corrosion was examined using Tafel lines and electrochemical impedance spectroscopy techniques in both of 0.6 M NaCl and a mixture of 0.5 M H₂SO₄ with 2 ppm HF solutions. The results indicate that the incorporation of high dispersed TiCN particles into Ni–P matrix led to a positive shift of the corrosion potential and an increase in the corrosion resistance for all aluminum substrates after their coating with Ni–P–TiCN. In addition, Ni–P–TiCN/Al electrodes showed a higher electrochemical catalytic activity and stability toward methanol oxidation in 0.5 M NaOH solution compared with that of Ni–P/Al. Copyright © 2014 John Wiley & Sons, Ltd.     

Simultaneous determination of ten organophosphate pesticide residues in fruits by gas chromatography coupled with magnetic separation

In this study, γ‐Fe₂O₃/chitosan magnetic microspheres were synthesized and evaluated by X‐ray diffraction, SEM, thermogravimetric analysis, and static and kinetic adsorption experiments. Results showed that the magnetic microspheres exhibited good adsorption ability, and offered fast kinetics for the adsorption of trichlorfon, methamidophos, malathion, methyl parathion, dimethoate, omethoate, phosphamidon, phorate, isocarbophos, and chlorpyrifos. Based on magnetic separation, a simple method of magnetic SPE coupled to GC for the simultaneous determination of ten trace organophosphate pesticide residues was developed. Under the optimal conditions, the enrichment factor for ten organophosphorus pesticides was 10.1–364.7 and linear range was 0.001–10.0 mg/L. The LOD (S/N = 3) of the method for the ten pesticides was 0.31–3.59 μg/kg. The RSD for three replicate extractions of spiked samples was between 2.5 and 6.3%. The pear and apple samples spiked with ten organophosphate pesticides at 20 and 200 μg/kg levels were extracted and determined by this method with good recoveries ranging from 79.9 to 98.7%. Moreover, the method has been successfully applied for the determination of the ten organophosphate pesticide residues in peach samples.