Analysis of natural frequency for imaging interface in liquid lens

Transmission beam can be modulated at the liquid–liquid interface inside an electrowetting liquid lens. The fluctuation characteristics of the interface has a decisive effect on the beam modulation. A closed cylinder in capillary constant scale is analyzed and the natural frequencies of a flat interface are obtained using capillary wave hydrodynamics. Results in modes0 and 1 are in good agreement with previous experiments in the literature. The influences of the radius, the height ratio and the height-to-diameter ratio of a liquid lens on the interface eigenfrequencies are analyzed.     

气膜孔角度对动叶前缘冲击/气膜复合冷却的影响

本文针对GE-E3第一级动叶前缘的冲击/气膜复合冷却结构进行了热流耦合数值研究。采用标准k-ω湍流模型,分析了前缘气膜孔对称布置时,其角度对透平动叶前缘冲击/气膜复合冷却特性的影响;在五种冷气质量流量比(MFR=0.005,0.010,0.016,0.020,0.025)下,研究了气膜孔在不同角度(β=20°,25°,30°,40°,50°,60°)时的透平动叶前缘冷却换热效果。研究结果表明:在本文研究范围内,气膜孔角度越小,透平动叶前缘的平均综合冷却效率越高;随着冷气质量流量比增大,透平动叶前缘的平均综合冷却效率逐渐提高。     

超临界CO2布雷登循环热电联供系统多目标优化

本文研究了以超临界CO₂布雷登循环为原动机的热电联供系统,对系统主要运行参数进行了分析,得到运行参数对于系统热力学性能和经济性能的影响规律。同时,以一次能源利用率和单位输出成本作为目标函数,采用多目标遗传算法对系统进行了优化;在优化结果的基础上,通过TOPSIS法决策出最优解,并与单目标最优解进行对比。结果表明,透平进口温度、透平进口压力和压缩机进口温度的增大有利于系统效率的提高;作为代价,成本也相应增加。在热电比0~4范围内,尽可能增大热电比能够最大程度上降低系统的单位输出成本,提高能源的利用率。     

燃气-蒸汽联合循环余热回收系统性能研究

燃气发电是我国城市供电的主要形式之一,针对LNG接收站一体的电厂发电模式进行研究,提出一种新型燃气-蒸汽联合循环热电联供系统,利用超临界CO₂布雷顿循环结合有机朗肯循环(ORC)辅助发电,将LNG作为冷源,对烟气余热进行三级利用。通过构建热力学和经济模型,以Aspen Plus软件模拟值为基础,结果表明:在消耗燃料1.704 kg/s(LNG)的条件下,联合循环净发电功率可达45 MW,供热量41.5 MW,余热利用率,热效率和?效率分别为88.50%,52.79%和46.69%。结合热-经济学与参数分析,利用Matlab优化后的最小单位发电成本为0.1529 CNY/kWh。考虑到碳排放价格,供电、供热、供气收益,燃料价格和设备成本,电厂每年的理想收益可达2989.5万元。     

Interrelationship between total volatile organic compounds emissions,structure and properties of natural rubber/polycaprolactone bio-blends cross-linked with peroxides

Natural rubber/polycaprolactone (NR/PCL) bio-based blends with different organic peroxides were prepared using an internal batch mixer and subsequently cross-linked at 170 °C. Two types of commonly used organic peroxides, dicumyl peroxide and di(tert-butylperoxyisopropyl)benzene peroxide, were applied as free-radical initiator. Cross-linking efficiency of NR/PCL blends were investigated using oscillating disc rheometer measurements, followed by infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis and tensile testing. Total volatile organic compounds (TVOCs) emissions were determined using headspace analysis integrated with gas chromatography with flame ionization detector. Determined TVOCs emissions varying in range 21.6–52.1 μg/g and generally value of this parameter decreased with increasing content of PCL phase in studied blends or with application of more efficient di(tert-butylperoxyisopropyl)benzene peroxide as cross-linking agent. It was found that increasing of TVOCs parameter indicated deterioration of mechanical properties of NR/PCL blends, which corresponded with the changes in chemical structure and thermal properties of cross-linked NR/PCL. This confirms that evaluation of TVOCs parameter is interesting alternative for “conventional methods” to characterization of the studied bio-based blends.     

Behavior of viscoelastic glass bead suspensions under superposed flows

Parallel superposed flows may be useful in order to explain the rheological behavior of viscoelastic suspensions. It has been shown that relaxation times of molecules are affected by a combined flow, and the rheological behavior of glass bead suspensions in a viscoelastic medium is explaned in terms of such variations.     

Construction of two fluorescence‐labeled non‐combined DNA index system miniSTR multiplex systems to analyze degraded DNA samples in the Chinese Han Population

MiniSTR loci have been demonstrated to be an effective approach in recovering genetic information from degraded specimens, because of the reduced PCR amplicon sizes which improved the PCR efficiency. Eight non‐combined DNA index system miniSTR loci suitable for the Chinese Han Population were analyzed in 300 unrelated Chinese Han individuals using two novel five fluorescence‐labeled miniSTR multiplex systems(multiplex I: D10S1248, D2S441, D1S1677 and D9S2157; multiplex II: D9S1122, D10S1435, D12ATA63, D2S1776 and Amelogenin). The allele frequency distribution and forensic parameters in the Chinese Han Population were reported in this article. The Exact Test demonstrated that all loci surveyed here were found to be no deviation from Hardy–Weinberg equilibrium. The accumulated power of discrimination and power of exclusion for the eight loci were 0.999999992 and 0.98, respectively. The highly degraded DNA from artificially degraded samples and the degraded forensic case work samples was assessed with the two miniSTR multiplex systems, and the results showed that the systems were quite effective.     

离轴三反红外双波段景象模拟器光学系统设计

 针对红外双波段成像系统性能测试与评估的应用需求,设计了3 μm～5 μm和8 μm～12 μm红外双波段视景仿真用离轴三反光学系统。在共轴三反光学系统成像理论基础上,分析了孔径光栏远离主镜的离轴三反系统像差特性,研究了大出瞳距、大相对孔径条件下离轴三反光学系统的结构设计和像差平衡方法。系统焦距为330 mm,F#为3,视场为6°×4.5°,出瞳距为750 mm,在空间频率10 lp/mm 处,中波红外MTF>0.65,长波红外MTF>0.4,接近衍射极限。具有大视场、大出瞳距、高分辨率、结构紧凑等特点。     

The effects of induced heat loads on the propagation of Ince-Gaussian beams

Thermal effects are very much influential in high power beam generators. Their impacts on special types of beams such as Helmholtz-Gauss beams have attracted special attentions. This work reports thermal effects on the generation and propagation of Ince-Gaussian beams. The results show considerable beam spot size variations for near fields under various induced heat loads. As Ince-Gaussian beams are directly related to cavity symmetry breaking, the results can greatly help system designers for circumventing these types of symmetry breaks usually encountered in high power lasers.     

Adaptive mechanical-wetting lens actuated by ferrofluids

We report an adaptive mechanical-wetting lens actuated by ferrofluids. The ferrofluids works like a piston to pump liquids in and out from the lens chamber, which in turn reshapes the lens curvature and changes the focal length. Both positive and negative lenses are demonstrated experimentally. The ferrofluid-actuated mechanical-wetting lens exhibits some attractive features, such as high resolution, fast response time, low power consumption, simple structure and electronic control, weak gravity effect, and low cost. Its potential applications in medical imaging, surveillance, and commercial electronics are foreseeable.