笼形聚氨肟树脂的研究：碱处理对吸附性能的影响

研究碱处理的笼形聚氨肟树脂（ＢＣＡＯ）对二价金属离子的吸附行为。吸附结果若生成２：１配的，得Ｍｇ＾２＋，Ｃａ＾２＋，Ｂａ＾２＋，Ｍｎ＾２＋，Ｃｏ＾２＋，Ｎｉ＾２＋，Ｚｎ＾２＋，Ｃｄ＾２＋，Ｐｂ＾２＋，Ｃｕ＾２＋离子的吸附效率分别是２７．１、２９．２、３０．４、２９．０、２７．１、３０．８、４５．０、３９．８、６０．３、６２．１％，Ｈｇ＾２＋离子的吸附效率高达１０５％，表明在吸附过程中同时生成２：１     

溶液酸度在线检测装置的研制

研制了酸度在线检测装置，并应用于溶液酸度在线检测，溶液酸度在线检测装置，设有防污过滤器，自动采样器，蠕动泵，小型管道ｐＨ传感器和控制电路等，其特点为防污除油，随机自动采样，定时检测，全部管道化，可单独使用和计算机控制系统联网，适用于溶液酸在线分析，测定精度〈ｐＨ０．０５。     

虚拟原子探针随机采样法用于氨基酸结构描述及其构效关系研究

考虑药物与蛋白质受体的3类非键作用模式, 利用8类虚拟原子探针和Monte Carlo随机采样技术, 得到了一套新的氨基酸侧链表面静电、立体及疏水势能场(ASSPF)参数. 在此基础上对苦味二肽和血管舒缓激五肽进行了结构表征和QSAR研究, 所建模型复相关系数R2和留一法交互检验复相关系数QLOOCV2分别为0.8457, 0.851和0.7688, 0.7952, 同时分析了肽链不同位置上氨基酸侧链对活性的影响, 取得较好的结果.     

Chemometric data analysis of pollutants in wastewater—a case study

In this study, chemometric techniques such as cluster analysis (CA), discriminant analysis (DA), principal component analysis (PCA) and partial least squares (PLS) were used to analyse the wastewater dataset to identify the factors which affect the composition of sewage of domestic origin, spatial and temporal variations, similarity/dissimilarity among the wastewater characteristics of cis- and trans-drains and discriminating variables. Samples collected from 24 wastewater drains in Lucknow city and from three sites on Gomti river in the month of January/February, May, August and November during the period of 5 years (1994-1999) were characterized for 32 parameters. The multivariate techniques successfully described the similarities/dissimilarities among the sewage drains on the basis of their wastewater characteristics and sources signifying the effect of routine domestic/commercial activities in respective drainage areas. Spatial and seasonal variations in wastewater composition were also determined successfully. CA generated six groups of drains on the basis of similar wastewater characteristic. PCA provided information on seasonal influence and compositional differences in sewage generated by domestic and industrial waste dominated drains and showed that drains influenced by mixed industrial effluents have high organic pollution load. DA rendered six variables (TDS, alkalinity, F, TKN, Cd and Cr) discriminating between cis- and trans-drains. PLS-DA showed dominance of Cd, Cr, NO₃, PO₄ and F in cis-drains wastewater. The results suggest that biological-process based STPs could treat wastewater both from the cis- as well as trans-drains, however, prior removal of toxic metals will be required from the cis-drains sewage. Further, seasonal variations in wastewater composition and pollution load could be the guiding factor for determining the STPs design parameters. The information generated would be useful in selection of process type and in designing of the proposed sewage treatment plants (STPs) for safe disposal of wastewater.     

Influence of drawing and heat treatment on surface free energies of polyethylene terephthalate fibers

The surface free energies of polyethylene terepthalate fibers with different draw ratios were experimentally determined by contact angle measurements inn-alkane/water systems. The dispersive component of the surface free energy increased with increasing draw ratio, whereas the nondispersive one remained almost constant. After heat treatment, the dispersive surface free energy increased, but was reduced above 140°C. The nondispersive component increased by heat treatment at 190°C. The increases in the density and birefringence of the fibres due to the drawing and heat treatment suggested that the increase in the dispersive surface free energy was caused by the increase in the atomic density at the fiber surface due to drawing and heat treatment. ESCA results indicated that the increment in the nondispersive surface free energy due to heat treatment was caused by the addition of functional groups to the fiber surface due to heat treatment.     

A review of heat treatment on polyacrylonitrile fiber

Developing carbon fiber from polyacrylonitrile (PAN) based fiber is generally subjected to three processes namely stabilization, carbonization, and graphitization under controlled conditions. The PAN fiber is first stretched and simultaneously oxidized in a temperature range of 200-300 °C. This treatment converts thermoplastic PAN to a non-plastic cyclic or a ladder compound. After oxidation, the fibers are carbonized at about 1000 °C in inert atmosphere which is usually nitrogen. Then, in order to improve the ordering and orientation of the crystallites in the direction of the fiber axis, the fiber must be heated at about 1500-3000 °C until the polymer contains 92-100%. High temperature process generally leads to higher modulus fibers which expel impurities in the chain as volatile by-products. During heating treatment, the fiber shrinks in diameter, builds the structure into a large structure and upgrades the strength by removing the initial nitrogen content of PAN precursor and the timing of nitrogen. With better-controlled condition, the strength of the fiber can achieve up to 400 GPa after this pyrolysis process.     

Chemical modification of polymer surfaces: a review

The main approaches that have been taken to chemically modify polymer surfaces are introduced and reviewed. These are wet chemical oxidation, plasma treatment, classical organic chemistry, and attachment of polymer chains. The extent to which each of these approaches can produce the specific modifications desired is discussed, and any unwanted effects that commonly occur are cited. Finally, the need for using several methods of surface analysis in concert to obtain adequate surface characterization is described.     

纳米SiO_2颗粒表面修饰的有机分子在介质中的光物理行为研究

利用Sol-Gel方法投篮了单分散性很好的球型二氧化硅纳米颗粒，通过表面化 学修饰法引入了带有荧光发色团的有机分子，通过稳态光物理方法研究了纳米颗粒 表面的有机分子在水、乙醇以及阴、阳离子表面活性剂悬浮液中的光物理行为。实 验表明，纳米颗粒表面有机分子的分散状态是决定其光物理行为的主要因素。这一 结果为设计和开发新型“壳-核”型纳米二氧化硅荧光传感器提供了有用的参考。     

The efficacy and progress in using radiation as a quarantine treatment of tropical fruits—a case study in Hawaii

Most tropical fruits for export must be treated with an approved quarantine treatment. Three and a half decades of research have demonstrated the efficacy of irradiation as a quarantine treatment in terms of efficiency, effectiveness, and product quality retention. The USFDA and the USDA-APHIS approved irradiation to disinfest fresh foods/fresh papayas in 1986 and 1989, respectively. In early 1995, the Hawaii Department of Agriculture was granted a special permit from USDA-APHIS allowing untreated Hawaiian fruits to be irradiated on the US mainland. The objectives were to gain experience in commercial irradiation as a quarantine treatment and to gather data on shipping and handling procedures, and on product quality. In April 1995, the first shipment of Hawaiian fruit was irradiated at a minimum quarantine dose of 0.25 kGy in an Isomedix plant near Chicago, and then distributed to supermarkets in Illinois and Ohio. Continuous shipments, irradiation, and marketing of various tropical fruits in the US have shown commercial efficacy, quality retention, and excellent consumer acceptance. A commercial e-beam/converted X-ray facility was installed by Titan Corp. on the Island of Hawaii and was operational by late July 2000. Hawaii has become the first place in the world to use irradiation as a quarantine treatment of fruits.     

Localization of Iα and Iβ phases in algal cellulose revealed by acid treatments

Highly crystalline I-rich type Cladophora cellulose, which had been kept in never-dried condition, was treated in 60wt% sulfuric acid at 100°C, for 1–48h. The cellulose microcrystals thus obtained were analysed by X-ray diffractometry, FT-IR, and transmission electron microscopy. The I component was found to be more degraded than the I component. The cellulose I/I ratios of the samples acid-treated for 0, 24, and 48 h were about 8:2, 6:4, and 4:6, respectively. After the acid treatment, the microcrystals became narrower in width, and very sharp at their ends. These results indicate that the I phase is mostly located at the surface of the microcrystals, which is morphologically more susceptible to the acid treatment.