Electron beam forming system for irradiation of large diameter cylindrical products

The report describes electron beam electromagnetic forming system, which is destined for irradiation of cylindrical long goods, specifically for PE tubes 160 mm diameter. System consists of electromagnet, power supply units, beam distributions control units, etc. for use at an electron accelerator at 5 MeV and 50 kW. The particular geometry of the magnet poles and their mutual arrangement are creating an irradiation field that allows the electrons to irradiate the surface of the product close to 90°.     

催化反应热诱导激光光偏转分析法测定尿素

报道用催化反应热诱导激光光偏转法测定痕量尿素。发现将脲酶制成一定浓度的乙醇浓液能显著地增强激光光偏转信号强度。探讨了增强作用机理以及光偏转号强度与尿素浓度的关系，并应用于尿样中尿素含量的测定，结果满意。     

Instrumental barriers in biological Fourier transform infrared spectroscopy

Biological applications of infrared spectroscopy have pressed for ever greater instrumental capabilities in terms of spectral sensitivity and quantitative exactness. Improved instrumentation has provided measurement of many vibrational modes in biological samples that previously were lost in noise. With highly optimized sampling conditions, useful measurements have been made with a peak-to-peak noise level less than 5 microabsorbance (5×10^–6 absorbance), at 0.5 cm^–1 resolution. However, optical and instrumental instabilities often result in sine waves that are not totally removed by the ratio of sample to reference. These often limit effective spectral sensitivity to 50 or 100 microabsorbance, peak-to-peak, and constitute a non-random noise. Non-atmospheric absorptions, especially one at 1959 cm^–1 with 0.8 cm^–1 band width (FWHM) are reported. The latter is due to a trace impurity in the KBr beam splitter substrate and compensator plate. Improvements in instrumentation and sampling conditions are expected to yield measurements of absorption bands as small as 50 microabsorbance with excellent signal/noise.     

Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

Surface cavities produced by high‐dose nitrogen ion implantation into silicon

Nitrogen ion implantation (24 keV, 4.6 × 10¹⁷ cm^?2) into (100) a p‐type silicon wafer material and a subsequent electron beam annealing at 1100 °C for 15 s under high vacuum conditions leads to the formation of an uneven surface in the implanted region caused by nitrogen bubbles beneath the surface. Annealing at 1200 °C for 300 s results in surface cavities with a mean diameter of 350 nm and a surface coverage of 3–4% and an average depth of ～60 nm. Nuclear reaction analysis reveals that the nitrogen concentration in the as‐implanted state exceeds 57 at%, the value of stoichiometric Si₃N₄. Annealing at 1100 °C for 15 s slightly reduces the nitrogen peak concentration, whereas annealing at 1200 °C for 300 s induces a significant alteration to the shape of the nitrogen depth profile coupled with the lowering of the concentration close to the stoichiometry of Si₃N₄. The results present a new method of producing sub‐micrometre cavities embedded in a thin silicon nitride film on wafer silicon which may lead to novel micro‐electronic and biotechnology applications. Copyright © 2007 John Wiley & Sons, Ltd.     

C60离子束撞击固体表面的坍塌与沉积(II)扫描隧道显微研究

Mass-selected C60 beam produced by laser ablation was accelerated and bombarded the (0001) surface of highly oriented pyrolitic graphite and (111) surface of gold single crystal. The samples were characterized by STM. The STM images showed that, the deposited species collapsed and formed planar structure on the solid surface, but the collapsed species were not dissociated and well oriented on the surface. Both positive and negative C60 ions were observed in the desorption mass spectra, confirming that the species collapsed on the solid surface are still the C60 clusters.     

Pulsed,Crossed, Supersonic Molecular Beam Studies of Refractory Atom Reactions

Dynamics of refractory atom reactions have been studied with a crossed beam apparatus combining two pulsed, supersonic molecular beam sources, a pulsed UV laser for creating the refractory atoms in the gas phase by laser ablation, and a pulsed dye laser to probe the reaction products by laser-induced fluorescence. Examples of the A1(²P_j) + O₂(X³∑_g)→ A10(X²∑⁺) + O(³P_j), Mg(¹S_o) + N₂O(X¹∑⁺) → MgO(X¹∑⁺,a³Π) + N₂(X¹∑_g⁺) andC(³P_j) + NO(X²Π_r) → CN(X²∑⁺) + 0(³P_j) systems are given. Comparisons with the studies performed using the conventional steady-state beam approach are made.     

双光束流动注射光度法测定生活用水中氯离子

将流动注射分析技术应用到双光束分光光度法中，对其理论和实验技术进行了研究，采用自行组装的流动注射系统进行了生活用水中氯离子的测定，获得满意结果。     

Decomposition of halogenated hydrocarbons using intense, penetrating bremsstrahlung

Radiolytic decomposition of chlorinated hydrocarbons and other toxic compounds has been experimentally measured using ionizing radiation produced by electron accelerator and nuclear isotope sources. Decomposition products have been identified. A portable, commercially available electron accelerator was set up at a Superfund site where vapor extraction wells were removing trichloroethylene (TCE) from a spill into the unsaturated soil. The extraction vapor was passed through the accelerator beam to decompose the TCE. On site radiolytic decomposition of TCE vapor using an accelerator is shown to be significantly less expensive than filtration of TCE vapor using activated charcoal.     

Design of a combined ozone/electron beam process for waste water and economic feasibility of the process

A design of a combined ozone/electron beam irradiation process for treating a 50 m³/h waste water stream from a molasses processing is discussed. Moreover, a cost evaluation of such a process in comparison to a conventional ozonation/biology treatment process has been performed to assess the potential of the irradiation process for technical use. Although the result of this comparison is not bad for the irradiation process an implementation into a full scale plant would not seem to be the thing to do in the present case.