Fluorescence quenching of anthropogenic fulvic acids by Cu(II), Fe(III) and UO(2)(2+)

The quenching of the fluorescence of three anthropogenic fulvic acids (FA) provoked by Cu(II) (pH 6.0), Fe(III) (pH 4.0) and UO₂²⁺ (pH 3.5), was analyzed by a non-linear method and by Stern-Volmer plots. The FA samples were extracted from composted sewage sludges (csFA), composted municipal wastes (mwFA) and composted livestock wastes (lsFA). Synchronous-scan fluorescence (SyF) spectra were collected as a function of metal ion concentration. Spectral data were treated by a self-modeling mixture analysis method (SIMPLISMA) to detect the SyF spectral band with the strongest quenching and to calculate the corresponding quenching profile. The analysis of these profiles by a non-linear method allowed the estimation of conditional stability constants (K) and of the percentage of non-complexing fluorophores. The same quantitative information was obtained by the modified Stern-Volmer equation taking into account the existence of fluorophores that do not participate in the complexation. Good agreement was found between the results of the two procedures. The log K calculated by the non-linear method were (standard deviation in parenthesis): csFA, Cu(II), 4.22 (5); Fe(III), 5.0 (1); UO₂²⁺, 5.2 (2); mwFA, Cu(II), 4.21 (3); Fe(III), 5.6 (2); UO₂²⁺, 4.7 (3); lsFA, Cu(II), 4.51 (8); Fe(III), 5.5 (2); UO₂²⁺, 3.6 (2).     

废水中偏二甲肼在Ni/Fe催化剂上的催化分解研究

研究了Ni/Fe催化剂对废水中偏二甲肼臭氧化分解的催化作用,考察了组分含量、体系的pH值和偏二甲肼初始浓度对催化反应的影响.结果表明,Ni/Fe催化剂对水中偏二甲肼的臭氧化具有良好的催化活性.催化剂组分含量、体系的pH值和初始浓度对反应的影响程度不大.对催化剂的XRD表征结果表明,催化剂主要由尖晶石结构的铁酸盐和FeNi3合金相组成,催化剂的良好催化性能与催化剂中尖晶石结构的铁酸盐和FeNi3合金相的形成有关.     

簇合物[Fe（DMF）6][W2S6]的合成,结构和性能研究

以(NH_4)_2WS_4、FeCl_3和NaS_2CNC_5H_(10)为原料,合成出[Fe(DMF)_6][W_2S_6]簇合物,用X射线衍射法测定了晶胞结构.其晶胞参数为a=0.8778(1)nm,b=0.9467(3)nm,c=1.1362(6)nm,α=71.506(1)°,β=74.775(2)°,γ=74.775(2)°,ν=0.84806nm~3,Z=1.晶体结构经块矩阵最小二乘法精修后,最终偏离因子R=0.0811.此外还进行了红外光谱、紫外可见光谱的测定.     

用MES及XRD研究FT合成催化剂的活性结构

采用穆斯堡尔谱及Ｘ光衍射法研究了共沉淀法制备的不同Ｆｅ／Ｍｎ比催化剂在焙烧、合成气还原及ＦＴ反应后体系相结构的变化。结果表明：锰助剂的加入使催化本相由铁磁性逐渐转化为超顺磁性，相应使催化剂还原逐渐难，Ｍｎ助剂促进了ＦＴ合成反应进行。反应性能与Ｆｅ／Ｍｎ尖晶石（Ｆｅ１－ｙＭｎｙ）３Ｏ４组成含量及式中ｙ大小密切相关，与ＭｎＣｏ３及ＭｎＯ的存在也有一定关系。富铁催化剂中Ｍｎ主要起电子助剂作用，而富锰催化     

ICP-AES法测定锌阳极中的铝、镉、铁、铜、铅

通过分析高频功率、雾化压力、辅助气流量和泵速等试验条件，建立了ICP-AES法测定锌阳极中铝、镉、铁、铜、铅的方法。用该方法测定锌阳极中的铝、镉、铁、铜、铅，其RSD分别为0.17%、0.63%、2.7%、5.2%、2.5%，回收率分别为99.3%-101.2%，99.3%-100.3%、97.1%-102.2%、97.8%-102.9%。对锌阳极试样进行测定，该方法的测定结果与GB4951-85方法的测定结果基本一致。     

Synthesis, structure and physical properties of Ru ferrites: BaMRu5O11 (M=Li and Cu) and BaM′2Ru4O11 (M′=Mn, Fe and Co)

The synthesis, structure, and physical properties of five R-type Ru ferrites with chemical formula BaMRu₅O₁₁ (M=Li and Cu) and BaM′₂Ru₄O₁₁ (M′=Mn, Fe and Co) are reported. All the ferrites crystallize in space group P6₃/mmc and consist of layers of edge sharing octahedra interconnected by pairs of face sharing octahedra and isolated trigonal bipyramids. For M=Li and Cu, the ferrites are paramagnetic metals with the M atoms found on the trigonal bipyramid sites exclusively. For M′=Mn, Fe and Co, the ferrites are soft ferromagnetic metals. For M′=Mn, the Mn atoms are mixed randomly with Ru atoms on different sites. The magnetic structure for BaMn₂Ru₄O₁₁ is reported.     

Simultaneous determination of cobalt,copper, iron and vanadium in crude petroleum oils by HPLC

Summary A method has been developed for the simultaneous formation and solvent extraction of cobalt (II), copper (II), iron (II) and vanadium (IV) complexes of bis (acetylpivalylmethane)ethylenediamine (H₂APM₂en) in methyl isobutyl ketone. The complexes are eluted from a reversed phase HPLC column with a mixture of methanol:water:acetonitrile and detection was at 260 nm. The method has been applied to the simultaneous determination of cobalt, copper, iron and vanadium in crude petroleum oils at the ng level.     

Fe3+掺杂TiO2光催化降解聚乙烯薄膜的研究

以快速溶胶-凝胶法制备了纳米TiO₂光催化剂，并用Fe³⁺对其掺杂改性，在室温条件下, 用于固相光催化降解聚乙烯(PE)包装薄膜的研究. 对催化剂和薄膜进行了X衍射分析(XRD)、傅立叶红外光谱分析(FT-IR)、扫描电子显微镜(SEM)形貌观察. 结果表明， 60 W紫外光辐射240 h后， PE失重为8.43%, 锐钛矿型纳米TiO₂光催化剂使PE失重30.66%；用Fe³⁺掺杂后，0.5%Fe₂O3/TiO₂、1.0%Fe₂O₃/TiO₂和2.0%Fe₂O3/TiO₂分别使PE失重35.91%、20.72%和13.30%. 光催化剂加速了PE的失重，碳链的断裂和光氧化腐蚀，在薄膜表面形成大量的坑洞，降解产物中的小分子量的石蜡含量明显增高. Fe³⁺掺杂有一个最佳量， 0.5%Fe₂O3/TiO₂光催化降解PE的活性最高.     

铁改性的Mo/ZSM-5催化剂上NO的选择性催化还原反应

采用浸渍法制备了Mo/ZSM-5, Fe/ZSM-5和不同Fe和Mo摩尔比的Fe-Mo/ZSM-5样品, 并以氨为还原剂对其NO选择性催化还原活性以及反应条件对催化性能的影响进行了研究. 结果表明, Fe-Mo/ZSM-5样品的NOx转化率明显比单独的Mo/ZSM-5和Fe/ZSM-5的高. 当n(Fe):n(Mo)为1.5时, Fe-Mo/ZSM-5样品具有最佳催化性能, 其NOx转化率在430 ℃时达到了96%, 并且能在高空速和不同O2气浓度的条件下保持高的催化活性. 同时采用XRD和XPS技术分别对催化剂的体相结构和表面性质进行了研究, 结果表明, 当n(Fe):n(Mo)=1.5时, Fe和Mo元素之间以及与载体HZSM-5之间存在较强的相互作用, 并且其表面的Mo3d的含量最高. 这可能与其高的催化活性有关. 另外还发现, 在反应过程中Fe-Mo/ZSM-5催化剂表面的氮氧物种主要是吸附态NO, 因此可以推测NO的催化还原反应机理是, 在催化剂表面上, 吸附态NO与吸附NH3物种直接反应生成氮气, 而非经过氧化为NO2的途径.     

Crystal structure of <Emphasis Type="Italic">tris</Emphasis>(1,10-phenanthroline) iron(II) dinitrate dihydrate

The structure of tris(1,10-phenanthroline)iron(II) dinitrate dihydrate [Fe(phen)₃](NO₃)₂·2H₂O was established by X-ray diffraction analysis. The role of hydrogen bonds in crystal packing is discussed.