Enhancement of Antibiotic Activity by 1,8-Naphthyridine Derivatives against Multi-Resistant Bacterial Strains

The search for new antibacterial agents has become urgent due to the exponential growth of bacterial resistance to antibiotics. Nitrogen-containing heterocycles such as 1,8-naphthyridine derivatives have been shown to have excellent antimicrobial properties. Therefore, the purpose of this study was to evaluate the antibacterial and antibiotic-modulating activities of 1,8-naphthyridine derivatives against multi-resistant bacterial strains. The broth microdilution method was used to determine the minimum inhibitory concentration (MIC) of the following compounds: 7-acetamido-1,8-naphthyridin-4(1H)-one and 3-trifluoromethyl-N-(5-chloro-1,8-naphthyridin-2-yl)-benzenesulfonamide. The antibiotic-modulating activity was analyzed using subinhibitory concentrations (MIC/8) of these compounds in combination with norfloxacin, ofloxacin, and lomefloxacin. Multi-resistant strains of Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus were used in both tests. Although the compounds had no direct antibacterial activity (MIC ≥ 1.024 µg/mL), they could decrease the MIC of these fluoroquinolones, indicating synergism was obtained from the association of the compounds. These results suggest the existence of a structure–activity relationship in this group of compounds with regard to the modulation of antibiotic activity. Therefore, we conclude that 1,8-naphthyridine derivatives potentiate the activity of fluoroquinolone antibiotics against multi-resistant bacterial strains, and thereby interesting candidates for the development of drugs against bacterial infections caused by multidrug resistant strains.     

Fabrication and Evaluation of Alginate/Bacterial Cellulose Nanocrystals–Chitosan–Gelatin Composite Scaffolds

It is common knowledge that pure alginate hydrogel is more likely to have weak mechanical strength, a lack of cell recognition sites, extensive swelling and uncontrolled degradation, and thus be unable to satisfy the demands of the ideal scaffold. To address these problems, we attempted to fabricate alginate/bacterial cellulose nanocrystals-chitosan-gelatin (Alg/BCNs-CS-GT) composite scaffolds using the combined method involving the incorporation of BCNs in the alginate matrix, internal gelation through the hydroxyapatite-d-glucono-δ-lactone (HAP-GDL) complex, and layer-by-layer (LBL) electrostatic assembly of polyelectrolytes. Meanwhile, the effect of various contents of BCNs on the scaffold morphology, porosity, mechanical properties, and swelling and degradation behavior was investigated. The experimental results showed that the fabricated Alg/BCNs-CS-GT composite scaffolds exhibited regular 3D morphologies and well-developed pore structures. With the increase in BCNs content, the pore size of Alg/BCNs-CS-GT composite scaffolds was gradually reduced from 200 μm to 70 μm. Furthermore, BCNs were fully embedded in the alginate matrix through the intermolecular hydrogen bond with alginate. Moreover, the addition of BCNs could effectively control the swelling and biodegradation of the Alg/BCNs-CS-GT composite scaffolds. Furthermore, the in vitro cytotoxicity studies indicated that the porous fiber network of BCNs could fully mimic the extracellular matrix structure, which promoted the adhesion and spreading of MG63 cells and MC3T3-E1 cells on the Alg/BCNs-CS-GT composite scaffolds. In addition, these cells could grow in the 3D-porous structure of composite scaffolds, which exhibited good proliferative viability. Based on the effect of BCNs on the cytocompatibility of composite scaffolds, the optimum BCNs content for the Alg/BCNs-CS-GT composite scaffolds was 0.2% (w/v). On the basis of good merits, such as regular 3D morphology, well-developed pore structure, controlled swelling and biodegradation behavior, and good cytocompatibility, the Alg/BCNs-CS-GT composite scaffolds may exhibit great potential as the ideal scaffold in the bone tissue engineering field.     

Identification of Bacteria Associated with Post-Operative Wounds of Patients with the Use of Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry Approach

The bacterial infection of post-operative wounds is a common health problem. Therefore, it is important to investigate fast and accurate methods of identifying bacteria in clinical samples. The aim of the study was to analyse the use of the MALDI-TOF MS technique to identify microorganism wounds that are difficult to heal. The most common bacteria are Escherichia coli, Staphylococcus spp., and Enterococcus spp. We also demonstrate the effect of culture conditions, such as the used growth medium (solid: Brain Heart Infusion Agar, Mueller Hilton Agar, Glucose Bromocresol Purple Agar, and Vancomycin Resistance Enterococci Agar Base and liquid: Tryptic Soy Broth and BACTEC Lytic/10 Anaerobic/F), the incubation time (4, 6, and 24h), and the method of the preparation of bacterial protein extracts (the standard method based on the Bruker guideline, the Sepsityper method) to identify factors and the quality of the obtained mass spectra. By comparing the protein profiles of bacteria from patients not treated with antibiotics to those treated with antibiotics based on the presence/absence of specific signals and using the UniProt platform, it was possible to predict the probable mechanism of the action of the antibiotic used and the mechanism of drug resistance.     

超级电容器用细菌纤维素基电极材料

超级电容器由于能提供比电池更高的功率密度,比传统电容器更高的能量密度而备受关注。但目前其应用仍存在能量密度低的问题。碳材料、金属氧化物和导电聚合物是常见的三种超级电容器电极材料,而其中不同形式碳材料是电容器中研究和应用最广泛的电极材料。细菌纤维素是由细菌分泌产生的具有一定纳米级孔径分布的多孔生物材料,具有高强度和模量、高孔隙率、极好的尺寸和热稳定性的特性。以细菌纤维素为原料制备电极材料是近年来超级电容器领域的热点研究方向之一。本文以细菌纤维素基电极材料的种类、制备方法和性能为线索,综述了国内外细菌纤维素基超级电容器电极材料的研究进展,并归纳总结了电极材料最优的形态和制备方法,进一步对该类电极材料的发展趋势进行了展望。     

Properties of bacterial cellulose transparent film regenerated from dimethylacetamide–LiCl solution

Excellent transparent films were prepared from bacterial cellulose (BC) sheets by solubilization of its defibrillated freeze‐dried specimens in a solvent of dimethylacetamide (DMAc) containing 8.0% (w/w) lithium chloride (LiCl), and their properties were compared with those of the native BC. Fibrillar structure of the native BC disappeared after dissolution, and the film formed after dissolution also loose this structure. Occurence of structural transformation from crystalline to amorphous state was also evidenced by X‐ray diffraction, solid state cross polarization/magic angle spinning ¹³C‐NMR and attenuated total reflectance–Fourier transform infrared spectroscopic analyses. In addition, excellent 3D uniform structure of the transparent BC film was further evidenced by X‐ray micro computed tomography. Plastic‐like characteristic was enhanced by film formation after dissolving the BC specimens in the DMAc–LiCl solution as shown by changing mechanical properties, a slight decrease in tensile strength (67.2 to 59.6 MPa) and breaking stress (67.2 to 58.4 MPa) but significant increase in elongation at break from 3.4 to 10.5%, and improvement of work of fracture from 5.8 to 21.2 kJ/m². Copyright © 2016 John Wiley & Sons, Ltd.     

The Effect of UV-Irradiation on Poly(vinyl alcohol) Composites with Bacterial Cellulose

The development of biodegradable packaging materials, especially from renewable resources is a constant preoccupation of nowadays, because of the environmental problems caused by synthetic polymers. The combination of cellulose with other polymeric materials could be an ecologic alternative and a way to use renewable resources for food packaging. Bacterial cellulose which is produced by microbial fermentation is also a promising material which can be used not only in biomedical application, but also as food packaging material. In this research different composite films between poly(vinyl alcohol)-bacterial cellulose (PVA-BC) were obtained by casting method. The obtained films were UV irradiated for different periods of times from 1 to 10 hours, using a mercury lamp, Philips TUV-30, emitting light mainly at 254 nm. Changes in FT-IR spectra before and after UV irradiation and the modification of transparency and of the swelling characteristics of the films were observed. As it was expected the composites materials are sensitive at UV exposure.     

Nanocellulose Polymer Composites as Innovative Pool for (Bio)Material Development

Summary: Using a “never-dried” procedure (according to Figure 4) shaped bacterial nanocellulose (BC, 1% cellulose, 99% water) has been modified by the formation of BC-polymer composites. For this purpose, acrylate and methacrylate monomers and methacrylate crosslinkers were photopolymerized inside an ethanol-swollen nanofiber network. Using the ethanol as solvent and as confirmed by model reactions the synthetic polymer (SP) part of the composites is constructed of crosslinked polymers (number of repeating units in the range of 500). As part of ongoing work on the development of (bio)materials from the innovative pool of BC composites these investigations are recently directed towards the creation of collagen-like materials. Thus, for these purposes, mainly water absorption capacity, strength, and elasticity have to be controlled, whilst still retaining essential features of BC like shape, nanofiber network, pore system, and proved biocompatibility. Using acrylic acid, 2-ethylhexyl acrylate, 2-hydroxyethyl methacrylate, N-vinyl pyrrolidone as acrylate monomers and triethylene glycol dimethacrylate and 1,4-butandiol dimethacrylate as crosslinkers of different concentrations either a filling of the pores or a coating of the fibers in the BC nanocomposites could be achieved. The small cellulose content of the composites significantly increases the water absorption value and the strength of the material as well as the ability of re-swelling in the case of fiber coated composites. Sample 12 is an optimized BC-SP composite regarding important properties of hyaline cartilage like Young's modulus in the range of 5–20 MPa using the well-known Simplex-method.     

BC/CoNi2S4@PPy柔性复合电极材料的制备及电化学性能

本文采用溶剂热、原位聚合和真空抽滤相结合的方法制备了用于超级电容器的细菌纤维素/镍钴硫化物/聚吡咯(BC/CoNi2S4@PPy)柔性电极材料,通过X 射线衍射、场发射扫描电镜、红外光谱、氮气吸脱附、拉伸强度和接触角表征了材料的形貌结构、组成、机械性能和亲水性,并采用循环伏安法和恒电流充放电测试了复合材料的电化学性能....     

A Colorimetric Assay to Enable High-Throughput Identification of Biofilm Exopolysaccharide-Hydrolyzing Enzymes

Glycosidase enzymes that hydrolyze the biofilm exopolysaccharide poly-β-(1→6)-N-acetylglucosamine (PNAG) are critical tools to study biofilm and potential therapeutic biofilm dispersal agents. Function-driven metagenomic screening is a powerful approach for the discovery of new glycosidase but requires sensitive assays capable of distinguishing between the desired enzyme and functionally related enzymes. Herein, we report the synthesis of a colorimetric PNAG disaccharide analogue whose hydrolysis by PNAG glycosidases results in production of para-nitroaniline that can be continuously monitored at 410 nm. The assay is specific for enzymes capable of hydrolyzing PNAG and not related β-hexosaminidase enzymes with alternative glycosidic linkage specificities. This analogue enabled development of a continuous colorimetric assay for detection of PNAG hydrolyzing enzyme activity in crude E. coli cell lysates and suggests that this disaccharide probe will be critical for establishing the functional screening of metagenomic DNA libraries.