Mutual solubilities of hydrocarbons and water with the CPA EoS

The knowledge of hydrocarbon/water phase equilibria is important in the design and operation of equipment for petroleum transport and refining and petrochemical plants. The presence of water in a hydrocarbon mixture can affect the product quality and damage the operation equipment due to corrosion and formation of gas hydrates. Tracing the concentration of hydrocarbons in aqueous media is also important for technical purposes like preventing oil spills and for ecological concerns such as predicting the fate of these organic pollutants in the environment.     

同位网格上不可压流动的反欠松弛压力修正算法

本文提出了同位网格上的不可压流动压力修正算法,其中压力修正值由压力方程所求得。设计了分离式的动量插值方法,有效地避免了松弛因子对计算结果的影响和不合理压力场的出现。提出了构造压力方程的反欠松弛方法,该方法建立了稳定和加速计算收敛的一般途径。对经典算例的计算得到了满意的结果。     

Ultrasonic evaluation of anisotropic damage in multiaxially textile-reinforced thermoplastic composites made from hybrid yarns

The basic damage and failure models of multiaxially reinforced composites with a thermoplastic matrix are presented and verified. Within the framework of continuum damage mechanics, a phenomenological model is introduced, where the damage is defined as a change in the elasticity tensor. For damage identification, a specific ultrasonic device was developed. A combination of an immersion set-up and a contact coupling device formed a system for an efficient determination of stiffness-tensor components from convenient sets of velocity measurements. Linked to a tensile machine, it allowed us to measure the anisotropic damage of the new materials group caused by tensile loading. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 2, pp. 221–234, March–April, 2006.     

二维正方各向异性碲圆柱光子晶体完全禁带中缺陷模的FDTD计算分析和设计

用FDTD方法计算了二维正方晶胞各向异性碲圆柱光子晶体的点缺陷模.为了得到TE,TM模式在完全禁带中具有相同共振频率的缺陷模,对中心点缺陷半径Rd以及中心附近对称位置的点缺陷半径Rn做了一系列微调.计算表明,TM模对于Rn的变化不敏感,而TE模随着Rn的改变出现了明显的规则的移动趋势.通过计算分析,发现对应于f=0.4的背景(R=0.3568a),当Rd=0.55a,Rn=0.26a时在完全禁带中TE和TM的缺陷模具有相同的共振频率ω0=0.2466ωe(其中ωe=2πca,a为晶格常数) 关键词： 时域有限差分法 光子晶体 缺陷模 各向异性     

上海市电力需求的协整与误差修正分析

本文采用协整与误差修正模型技术研究了上海市电力需求的决定因素,建立了上海电力需求函数,检验了电力需求与国内生产总值、电力价格、经济结构、电力使用效率之间的长期均衡关系及短期波动关系。     

Mathematical topographical correction of XPS images using multivariate statistical methods

For rough heterogeneous samples, the contrast observed in XPS images may result from both changes in elemental or chemical composition and sample topography. Background image acquisition and subtraction are frequently utilized to minimize topographical effects so that images represent concentration variations in the sample. This procedure may significantly increase the data acquisition time. Multivariate statistical methods can assist in resolving topographical and chemical information from multispectral XPS images. Principal component analysis (PCA) is one method for identification of the highest correlation/variation between the images. Topography, which is common to all of the images, will be resolved in the first most significant component. The score of this component contains spatial information about the topography of the surface, whereas the loading is a quantitative representation of the topography contribution to each elemental/chemical image. The simple‐to‐use self‐modelling mixture analysis (Simplisma) method is a pure variable method that searches for the source of most differences in the data and therefore has the potential to distinguish between chemical and topographical phases in images. The mathematical background correction scheme is developed and validated by comparing results to the experimental background correction for samples with differing degrees of topography. Copyright © 2004 John Wiley & Sons, Ltd.     

激光水下扫描成像系统的图像修正机理

同步扫描系统可以克服后向散射，但同时也产生了两种非线性，一是扫描线速度的非线性，一是由于距离对光能衰减造成的非线性，两种非线性都需要修正，本文从原理上讨论水下激光成像时能量衰减的修正原理与修正方法，并给出仿真结果。     

Unique continuation along curves and hypersurfaces for second order anisotropic hyperbolic systems with real analytic coefficients

In this paper we prove the following kind of unique continuation property. That is, the zero on each geodesic of the solution in a real analytic hypersurface for second order anisotropic hyperbolic systems with real analytic coefficients can be continued along this curve.

     

Asymptotic Correction of More Sturm–Liouville Eigenvalue Estimates

The asymptotic correction technique of Paine, de Hoog and Anderssen can dramatically improve the accuracy of finite difference or finite element eigenvalues at negligible extra cost if closed form expressions are available for the errors in a simpler related problem. This paper gives closed form expressions for the errors in the eigenvalues of certain Sturm–Liouville problems obtained by various methods, thereby increasing the range of problems for which asymptotic correction can achieve maximum efficiency. It also investigates implementation of the method for more general problems.