金、银纳米结构中的非局域吸收特性

采用时域有限差分方法（FDTD）研究金、银纳米结构的非局域吸收。对金属材料的Drude-Lorentz模型进行离散差分,详细推导各项迭代系数。研究一维、二维、三维金、银纳米结构的吸收特性。讨论一维分层纳米薄膜吸收率与材料的关系。结果表明：非局域分层介质板仍然符合等效介质理论。在一维、二维情况下,金、银纳米结构的非局域吸收峰只与纳米尺度相关而与材料无关。三维纳米结构的非局域吸收特性不仅与纳米尺度相关还与材料特性相关。三维纳米结构尺度更小,非局域效应表现也更为明显,吸收峰的蓝移也更大。因此,三维纳米颗粒有望在纳米材料以及纳米器件的研究中发挥更大的作用。     

长链脂肪酸影响胆红素-人血清蛋白复合物的激发态分化

胆红素与人血清白蛋白结合后会发生光异构和光诱导环化反应,其中后一反应将最终形成一种名为光红素的产物,这些光诱导化学反应是临床上治疗新生儿黄疸的基本原理. 据前人研究报道,长链脂肪酸的加入有利于光红素的生成,但其背后的机理,特别是其激发态动力学尚不明确. 本文利用飞秒瞬态吸收和飞秒荧光转换技术,探究了棕榈酸对胆红素在血清蛋白中的光化学反应的影响. 研究表明,随着棕榈酸的加入,光激发后的胆红素更倾向于通过4 ps的衰减通道返回热基态,而不是通过固有的超快激发态衰减途径(小于1 ps). 这一效应促进了热基态的胆红素发生由Z-Z到E-Z构型的异构化,从而提高了光红素的产率. 这是首次利用飞秒时间分辨光谱技术对长链脂肪酸在光疗过程中的作用进行表征,其结果可为相关临床研究提供有利的信息.     

Minimum Divergence Estimators,Maximum Likelihood and the Generalized Bootstrap

This paper states that most commonly used minimum divergence estimators are MLEs for suited generalized bootstrapped sampling schemes. Optimality in the sense of Bahadur for associated tests of fit under such sampling is considered.     

Modeling and Performance Optimization of an Irreversible Two-Stage Combined Thermal Brownian Heat Engine

Based on finite time thermodynamics, an irreversible combined thermal Brownian heat engine model is established in this paper. The model consists of two thermal Brownian heat engines which are operating in tandem with thermal contact with three heat reservoirs. The rates of heat transfer are finite between the heat engine and the reservoir. Considering the heat leakage and the losses caused by kinetic energy change of particles, the formulas of steady current, power output and efficiency are derived. The power output and efficiency of combined heat engine are smaller than that of single heat engine operating between reservoirs with same temperatures. When the potential filed is free from external load, the effects of asymmetry of the potential, barrier height and heat leakage on the performance of the combined heat engine are analyzed. When the potential field is free from external load, the effects of basic design parameters on the performance of the combined heat engine are analyzed. The optimal power and efficiency are obtained by optimizing the barrier heights of two heat engines. The optimal working regions are obtained. There is optimal temperature ratio which maximize the overall power output or efficiency. When the potential filed is subjected to external load, effect of external load is analyzed. The steady current decreases versus external load; the power output and efficiency are monotonically increasing versus external load.     

基于TDLAS技术的CH4气体检测与温度补偿方法

CH₄气体的精准检测对防止矿井瓦斯爆炸,确保安全生产至关重要。目前基于可调谐半导体激光吸收光谱技术（TDLAS）存在因温度变化导致气体浓度测量误差较大。探究了基于TDLAS的CH₄气体检测系统与温度补偿方法,分析温度对CH₄气体吸收谱线的影响,通过算法补偿模型消除环境温度对CH₄气体检测的影响。依据TDLAS技术原理及相关理论,对系统发射单元、吸收池、信号接收单元、数据处理单元进行设计,搭建了基于TDLAS技术的CH₄气体浓度检测系统,实验检测了不同环境温度（10~50 ℃）时0.04%CH₄气体浓度,分析温度变化对CH₄气体在波长为1.653 μm处吸收谱线强度和半宽度的影响。为消除温度对CH₄气体检测的影响并提高补偿效果,采用粒子群优化算法（PSO）优化BP神经网络（BPNN）的最佳权值和阈值,建立CH₄气体的PSO-BP温度补偿模型,克服了BP神经网络收敛速度慢、易陷入局部最优的缺点。结果表明：（1）基于TDLAS的CH₄气体检测浓度随环境温度升高而下降,整个实验温度内相对误差范围为4.25%~12.13%,不同环境温度下CH₄气体检测浓度与温度之间的关系可用一元三次多项式表示;（2）CH₄气体的吸收强度和半宽度随着温度的升高而下降,与温度变化之间的关系为单调递减函数,温度对CH₄气体吸收谱线强度的相对变化率大于吸收谱线半宽度的相对变化率,CH₄气体吸收谱线的强度更容易受温度变化的影响;（3）BP神经网络和PSO-BP模型测试样本的绝对平均误差（MAE）分别为12.88%和1.81%,平均绝对百分比误差（MAPE）分别为2.3%和0.3%,均方根误差（RMSE）分别为15.96%和2.69%,相关系数R2分别为0.980 6和0.999 6。通过建立PSO-BP温度补偿模型,补偿效果大部分分布在±1.0%的误差范围内,MAE,MAPE,RMSE和R2等评价指标均大幅度提升,对提高TDLAS技术在矿井CH₄的精准检测具有一定的参考意义。     

High efficiency and broad bandwidth terahertz vortex beam generation based on ultra-thin transmission Pancharatnam–Berry metasurfaces

The terahertz(THz) vortex beam generators are designed and theoretically investigated based on single-layer ultra-thin transmission metasurfaces. Noncontinuous phase changes of metasurfaces are obtained by utilizing Pancharatnam–Berry phase elements, which possess different rotation angles and are arranged on two concentric rings centered on the origin.The circularly polarized incident THz beam could be turned into a cross-polarization transmission wave, and the orbital angular momentum(OAM) varies in value by lh. The l values change from ±1 to ±5, and the maximal cross-polarization conversion efficiency that could be achieved is 23%, which nearly reaches the theoretical limit of a single-layer structure.The frequency range of the designed vortex generator is from 1.2 THz to 1.9 THz, and the generated THz vortex beam could keep a high fidelity in the operating bandwidth. The propagation behavior of the emerged THz vortex beam is analyzed in detail. Our work offers a novel way of designing ultra-thin and single-layer vortex beam generators, which have low process complexity, high conversion efficiency and broad bandwidth.     

In-plane oriented CH_3NH_3PbI_3 nanowire suppression of the interface electron transfer to PCBM

One-dimensional nanowire is an important candidate for lead-halide perovskite-based photonic detectors and solar cells. Its surface population, diameter, and growth direction, etc., are critical for device performance. In this research,we carried out a detailed study on electron transfer process at the interface of nanowire CH_3 NH_3 PbI_3(N-MAPbI_3)/Phenyl C61 butyric acid methyl-ester synonym(PCBM), as well as the interface of compact CH_3 NH_3 PbI_3(C-MAPbI_3)/PCBM by transient absorption spectroscopy. By comparing the carrier recombination dynamics of N-MAPbI_3, N-MAPbI_3/PCBM,C-MAPbI_3, and C-MAPbI_3/PCBM from picosecond(ps) to hundred nanosecond(ns) time scale, it is demonstrated that electron transfer at N-MAPbI_3/PCBM interface is less efficient than that at C-MAPbI_3/PCBM interface. In addition, electron transfer efficiency at C-MAPbI_3/PCBM interface was found to be excitation density-dependent, and it reduces with photo-generation carrier concentration increasing in a range from 1.0 × 1018 cm~(-3)–4.0 × 1018 cm~(-3). Hot electron transfer,which leads to acceleration of electron transfer between the interfaces, was also visualized as carrier concentration increases from 1.0 × 10~(18) cm~(-3)–2.2 × 10~(18) cm~(-3).     

超亲水-超疏水组合壁面冷凝性能研究

本文通过水热法,结合气相沉积法和掩膜紫外光刻法,在玻璃基底上成功地制备了一种具有多尺度结构的超亲水-超疏水组合壁面,并对制备的具有不同润湿差异的组合壁面的冷凝效率进行了测试。结果表明壁面的冷凝效率取决于亲疏水区域的宽度和润湿性差异,其中当亲水区域宽度为0.80 mm,接触角约为0°,疏水区域宽度为0.95 mm,接触角为158°时,其冷凝效率相比光滑铜片的冷凝效率可以提高39%。进一步分析表明,液滴在极端润湿模式的组合表面的润湿分界线处具有较高的体积传输速率,且在超亲水区形成的连续微流通道加快了冷凝液滴快速排放,提高了整体表面的自更新能力。本文的研究,将为复杂润湿界面滴状冷凝的优化提供方向。     

Efficient two-dimensional atom localization in a five-level conductive chiral atomic medium via birefringence beam absorption spectrum

We have theoretically investigated two-dimensional atom localization using the absorption spectra of birefringence beams of light in a single wavelength domain.The atom localization is controlled and modified through tunneling effect in a conductive chiral atomic medium with absorption spectra of birefringent beams.The significant localization peaks are investigated in the left and right circularly polarized beam.Single and double localized peaks are observed in different quadrants with minimum uncertainty and significant probability.The localized probability is modified by controlling birefringence and tunneling conditions.These results may be useful for the capability of optical microscopy and atom imaging.