A three‐dimensional Cartesian cut cell method for incompressible viscous flow with irregular domains

A three‐dimensional Cartesion cut cell method is presented for the simulations of incompressible viscous flows with irregular domains. A new model (referred to as ‘6+N’ model) is proposed to describe arbitrarily shaped cut cells and treat all the cells as polyhedrons with 6+N faces. The finite volume discretization of the Navier–Stokes equation is then implemented by using the ‘6+N’ model to separate the surface flux integrals into two parts, that is, the fluxes through the basic face of the hexahedron and those through the cutting surfaces. The previously proposed Kitta Cube algorithm and volume computer‐aided design platform (J. Comput. Aided. Des. 2005; 37(4): 1509–1520. Doi:10.1016/j.cad.2005.03.006) are adopted to generate cut cells and provide shape data and physical attributes for the numerical analysis. A modified SIMPLE‐based smoothing pressure correction scheme is applied to suppress checkerboard pressure oscillations caused by the collocated arrangement of velocities and pressure. The calculation accuracy of the numerical method expressed by L₁ and L _∞ norm errors is first demonstrated by the simulation of a pipe flow. Then its feasibility, efficiency, and potential in engineering applications are verified by applying it to solve natural convections between concentric spheres and between eccentric spheres. The heat transfer patterns in eccentric spheres are also obtained by using the numerical method. Copyright © 2011 John Wiley & Sons, Ltd.     

Effects of multi-Schell beams on orbital angular momentum of entangled signal photons in low-order turbulence aberration channels

We model the detection and crosstalk probability of orbital angular momentum (OAM) states of the entangled signal photon in the Kolmogorov channels of the low-order turbulence aberrations and by the Rytov approximation. The results show that lower OAM mode number of signal photons and larger sub-beam number of multi-Gaussian Schell-model pump beam, the less susceptible of the detection probability of the signal photon to spatial coherence of source and turbulence aberrations is achieved. The maximum crosstalk probability is decrease as the decreasing of the sub-beam number of multi-Gaussian Schell-model. Enlarging OAM difference value or decreasing sub-beam number of multi-Gaussian Schell-model pump beam results in a lower crosstalk probability of the OAM of entangled signal photons.     

一类综合评价指数编制路径及案例

综合评价指数是一种广义上的统计指数,在讨论了综合评价指数与一般统计指数不同的基础上,引述了综合评价指数一般编制步骤并详细分析研究了综合评价指数编制过程中的权重确定,提出了基于等权设计思想的加权修正综合评价指数编制方法,最后以甘肃省装备制造产业为例进行了展示.     

Quantitative assessment of motion correction for high angular resolution diffusion imaging

Several methods have been proposed for motion correction of high angular resolution diffusion imaging (HARDI) data. There have been few comparisons of these methods, partly due to a lack of quantitative metrics of performance. We compare two motion correction strategies using two figures of merit: displacement introduced by the motion correction and the 95% confidence interval of the cone of uncertainty of voxels with prolate tensors. What follows is a general approach for assessing motion correction of HARDI data that may have broad application for quality assurance and optimization of postprocessing protocols. Our analysis demonstrates two important issues related to motion correction of HARDI data: (1) although neither method we tested was dramatically superior in performance, both were dramatically better than performing no motion correction, and (2) iteration of motion correction can improve the final results. Based on the results demonstrated here, iterative motion correction is strongly recommended for HARDI acquisitions.     

Proposition of a compensated pixelwise calibration for photonic infrared cameras and comparison to classic calibration procedures: Case of thermoelastic stress analysis

In this paper, we propose a compensated pixelwise calibration that integrates the effects of the camera housing temperature. The results of this calibration are compared on black body images to classic two points Non Uniformity Correction based calibrations, compensated or not. It is shown that the proposed approach leads to a significant improvement in the thermal resolution with a reduction in the mean error as well as the standard deviation. The approach is finally challenged on a real case measurement focusing on thermoelasticity. The gain in terms of accuracy measurement is highlighted by comparing the proposed calibration to classic calibrations and the scope of interest of this new calibration is discussed.     

高精度中小11径非球面修抛技术研究

为实现高精度中小口径非球面的加工，介绍了一种非球面修抛技术。基于Preston假设，将抛光过程描述成一个线性方程，计算得到材料的去除量与抛光时间、抛光压力和零件转速之间的函数关系。设计了整体修抛法和环带修抛法两种方法，在数控抛光的基础上，对口径为Ф117mm的凹抛物面和口径为Ф17mm凸双曲面进行修抛，修抛后非球面的面形精度PV值为0．184μm，RMS均小于0．032μm，达到了工程化应用要求，实现了中小口径非球面的高精度加工。     

Kinetics of radical‐molecule reactions in aqueous solution: A benchmark study of the performance of density functional methods

The performance of 18 density functional approximations has been tested for a very challenging task, the calculations of rate constants for radical‐molecule reactions in aqueous solution. Despite of the many difficulties involved in such an enterprise, six of them provide high quality results, and are recommended to that purpose. They are LC‐ωPBE, M06‐2X, BMK, B2PLYP, M05‐2X, and MN12SX, in that order. This trend was obtained using experimental data as reference. The other relevant aspects used in this benchmark are: (i) the SMD model for mimicking the solvent; (ii) the conventional transition state, the zero‐curvature tunneling correction, and the limit imposed by diffusion for the calculation of the rate constants. Even though changing any of these aspects might alter the trend in performance, at least, when using them, the aforementioned functionals can be successfully used to obtain high quality kinetic data for the kind of reactions investigated in this work. © 2014 Wiley Periodicals, Inc.     

基于黑体标定的红外图像非均匀性校正系统设计

为提高某中波红外探测器的图像质量,设计了基于FPGA的红外图像实时处理系统,系统能够完成实时的非均匀性校正与盲元补偿处理。介绍了目前常用的非均匀性校正、盲元识别和补偿算法,并结合实际工程需求采用多点法进行非均匀性校正以及8点平均法进行盲元补偿。在仿真实验成功的基础上,基于FPGA平台构建了硬件平台。系统可以实现系数自定义更新,可以手动或自动完成非均匀性较正系数计算,以及实现盲元列表的自动更新操作。利用某国产中波红外探测器对处理系统进行了测试试验,实验结果表明:校正后图像非均匀性0.3%,盲元率0.001%。系统工作稳定、可靠,图像处理满足实时性和精度要求。     

大口径离轴凸非球面系统拼接检验技术

针对大口径离轴凸非球面面形检测的困难,本文将光学系统波像差检验技术与子孔径拼接干涉技术相结合,提出了凸非球面系统拼接检测方法。对该方法的基本原理和具体实现过程进行了分析和研究,并建立了合理的子孔径拼接数学模型。当离轴三反光学系统的主镜和三镜加工完成以后,对整个系统进行装调和测试,并依次测定光学系统各视场的波像差分布,通过综合优化子孔径拼接算法和全口径面形数据插值可以求解得到大口径非球面全口径的面形信息,从而为非球面后续加工和系统的装调提供了依据和保障。结合工程实例,对一口径为287 mm×115 mm的离轴非球面次镜进行了系统拼接测试和加工,经过两个周期的加工和测试,其面形分布的RMS值接近1/30λ(λ=632.8 nm)。     

An evaluation method based on absolute difference to validate the performance of SBNUC algorithms

Scene-based non-uniformity correction (SBNUC) algorithms are an important part of infrared image processing; however, SBNUC algorithms usually cause two defects: (1) ghosting artifacts and (2) over-correction. In this paper, we use the absolute difference based on guided image filter (AD-GF) method to validate the performance of SBNUC algorithms. We obtain a self-separation source using the improved guided image filter to process the input image, and use the self-separation source to obtain the space-high-frequency parts of the input image and the corrected image. Finally, we use the absolute difference between the two space-high-frequency parts as the evaluation result. Based on experimental results, the AD-GF method has better robustness and can validate the performance of SBNUC algorithms even if ghosting artifacts or over-correction occur. Also the AD-GF method can measure how SBNUC algorithms perform in the time domain, it’s an effective evaluation method for SBNUC algorithm.