关于超高分子量聚丙烯超拉伸膜的结构性能的研究——Ⅱ.形态结构变化对力学性能的影响

用X-射线衍射、动态力学测定等手段研究了不同拉伸倍数的超高分子量聚丙烯薄膜的力学性能的变化.以X-射线衍射法并基于串联力学模型的假设得到的各样品的表观晶区模量E_c~(app)约为34-38GPa.样品模量E_b随拉伸倍数增加而逐渐增大,其变化趋势与非晶区取向因子的变化相类似,说明非晶区取向是左右样品模量的重要因素.室温下,69倍拉伸样品的模量为27GPa,约为表观结晶模量的3/4,且其值在-150-160℃的温度范围内没有急剧变化,说明超拉伸明显改善了材料的力学性能及热稳定性.在各拉伸样品中,考虑伸直链结晶生成的可能性,利用并串联力学模型对伸直链结晶的体积分数做了估算,并对X-射线衍射法所得表观结晶模量进行了修正,认为室温下聚丙烯的真正晶区模量约为47GPa.     

Decay rates of energy of the 1D damped original nonlinear wave equation

We consider the decay rate of energy of the 1D damped original nonlinear wave equation. We first construct a new energy function. Then, employing the perturbed energy method and the generalized Young’s inequality, we prove that, with a general growth assumption on the nonlinear damping force near the origin, the decay rate of energy is governed by a dissipative ordinary differential equation. This allows us to recover the classical exponential, polynomial, or logarithmic decay rate for the linear, polynomial or exponentially degenerating damping force near the origin, respectively. Unlike the linear wave equation, the exponential decay rate constant depends on the initial data, due to the nonlinearity.     

Some remarks on the modulus of continuity of a conformal mapping of the disk onto a Jordan domain

Letd(;z, t) be the smallest diameter of the arcs of a Jordan curve with endsz andt. Consider the rapidity of decreasing ofd(;)=sup{d(;z, t):z, t , ¦z–t¦} (as 0,0) as a measure of nicety of . Letg(x) (x0) be a continuous and nondecreasing function such thatg(x)x,g(0)=0. Put¯g(x)=g(x)+x, h(x)=(¯g(x))². LetH(x) be an arbitrary primitive of 1/h ^–1(x). Note that the functionH ^–1 x is positive and increasing on (–, +),H ^–1 0 asx– andH ^–1+ asx +. The following statement is proved in the paper.Translated fromMatematicheskie Zametki, Vol. 60, No. 2, pp. 176–184, August, 1996.This research was supported by the Russian Foundation for Basic Research under grant No. 93-01-00236 and by the International Science Foundation under grant No. NCF000.     

The uniform modulus of continuity of iterated Brownian motion

LetX be a Brownian motion defined on the line (withX(0)=0) and letY be an independent Brownian motion defined on the nonnegative real numbers. For allt0, we define theiterated Brownian motion (IBM),Z, by setting . In this paper we determine the exact uniform modulus of continuity of the process Z.Research supported by NSF grant DMS-9122242.     

Singularity spectrum of fractal signals from wavelet analysis: Exact results

The multifractal formalism for singular measures is revisited using the wavelet transform. For Bernoulli invariant measures of some expanding Markov maps, the generalized fractal dimensions are proved to be transition points for the scaling exponents of some partition functions defined from the wavelet transform modulus maxima. The generalization of this formalism to fractal signals is established for the class of distribution functions of these singular invariant measures. It is demonstrated that the Hausdorff dimensionD(h) of the set of singularities of Hölder exponenth can be directly determined from the wavelet transform modulus maxima. The singularity spectrum so obtained is shown to be not disturbed by the presence, in the signal, of a superimposed polynomial behavior of ordern, provided one uses an analyzing wavelet that possesses at leastN>n vanishing moments. However, it is shown that aC behavior generally induces a phase transition in theD(h) singularity spectrum that somewhat masks the weakest singularities. This phase transition actually depends on the numberN of vanishing moments of the analyzing wavelet; its observation is emphasized as a reliable experimental test for the existence of nonsingular behavior in the considered signal. These theoretical results are illustrated with numerical examples. They are likely to be valid for a large class of fractal functions as suggested by recent applications to fractional Brownian motions and turbulent velocity signals.     

Effect of molecular orientation distribution and crystallinity on the measurement of the crystal lattice modulus of nylon 6 by x-ray diffraction

The crystal lattice modulus of nylon 6 (-type) was measured by x-ray diffraction using nylon 6 films drawn up to five times. The measured crystal lattice modulus was 173–175 GPa for all specimens whose crystallinity and the Young's modulus were beyond 46% and 3.75 GPa, respectively. These results indicate that a state of homogenous stress can be achieved. In contrast, the values were scattered for the speciments whose crystallinity and Young's modulus are less than the above values. To study the origin, a numerical calculation of the crystal lattice modulus, as measured by x-ray diffraction, was carried out by considering effects on the orientation factors of molecular chains and crystallinity. In this calculation, a previously introduced model was employed, in which oriented crystalline layers are surrounded by oriented amorphous phases so that the strains of the two phases at the boundary are identical. The theoretical results calculated by the introduced model indicated that the crystal lattice modulus by x-ray diffraction is almost equal to the intrinsic crystal modulus if the morphology of the test specimen can be represented as a series model. In contrast, if a parallel model is more appropriate, the difference between the measured modulus and the intrinsic value can be pronounced. Such morphological dependence was found to be less pronounced with increasing high degree of molecular orientation and crystallinity.     

Mechanical properties and molecular mobility in oriented polyolefines

The static modulus of elasticity (E) and the correlation time of rotation ( _c ) of 2,-2,6,6-tetramethylpiperidine-1-oxyl are studied as a function of the temperature (210<T <350°K) for oriented films of isotactic polypropylene and polyethylene of high and low density.E and _c change both upon heating and polymer orientation; this result indicates that sample properties are influenced by the microstructure of the amorphous phase where probes are localized.     

NANOMECHANICAL MAPPING OF CARBON BLACK REINFORCED NATURAL RUBBER BY ATOMIC FORCE MICROSCOPY

Atomic force microscopy （AFM） has the advantage of obtaining mechanical properties as well as topographic information at the same time. By analyzing force-distance curves measured over two-dimensional area using Hertzian contact mechanics, Young＇s modulus mapping was obtained with nanometer-scale resolution. Furthermore, the sample deformation by the force exerted was also estimated from the force-distance curve analyses. We could thus reconstruct a real topographic image by incorporating apparent topographic image with deformation image. We applied this method to carbon black reinforced natural rubber to obtain Young＇s modulus distribution image together with reconstructed real topographic image. Then we were able to recognize three regions; rubber matrix, carbon black （or bound rubber） and intermediate regions. Though the existence of these regions had been investigated by pulsed nuclear magnetic resonance, this paper would be the first to report on the quantitative evaluation of the interfacial region in real space.     

Elastic moduli and structure of low density polyethylene

Summary Low density polyethylene film is drawn at room temperature four times the original length and subjected to thermal annealing at 60, 80, and 100 °C keeping the film length constant. Long spacing measured by SAXS increased with increasing temperature of annealing; the increase of the long spacing is presumed to be due to the decrease of the number of micelles through relaxation during the annealing. Simultaneous measurement of the changes of the long spacing and the film length by stretching is carried out and stress-extension curves are obtained. The values of the initial moduli of the long spacingE ₁ and the film lengthY are very near to each other. Elastic modulus of the crystal latticeE _c is known to be 235 GN/m² and that of the amorphous regionE _a is found to be 0.15 GN/m². When higher stress is applied than in the case of the initial modulus, the percentage of extension of film is much greater than that of the long spacing. The discrepancy is explained by the increase of the number of micelles through stress crystallization.Dedicated to Professor Dr. K. Ueberreiter on the occasion of his 70th birthday.