Wave propagation in stereo-lithographical (STL) bone replicas at oblique incidence

Comparisons between predictions of a Biot-Allard model allowing for angle-dependent elasticity and angle-and-porosity dependent tortuosity and transmission data obtained at normal incidence on water-saturated replica bones are extended to oblique incidence. The model includes two parameters which are adjusted for best fit at normal incidence. Using the same parameter values, it is found that predictions of the variation of transmitted waveforms with angle through two types of bone replica are in reasonable agreement with data despite the fact that scattering is not included in the theory.     

Multipole effects in non-Kramers doublet system PrMg3

We performed ultrasonic measurements on a single crystal of PrMg₃. The characteristic Curie-type softening was observed in temperature dependence of transverse mode (C₁₁-C₁₂)/2 below 8 K down to 0.8 K. This softening in PrMg₃ is caused by a non-Kramers Γ₃ doublet ground state having electric quadrupoles O_u and O_v and magnetic octupole T_xyz. The elastic constant (C₁₁-C₁₂)/2 shows a minimum at 25 K, which cannot be explained by the quadrupole susceptibility based on the crystal electric field (CEF) levels. However, considering higher order (l=4) multipole, namely electric hexadecapole, the minimum around 25 K was well reproduced. At lower temperatures, a shoulder anomaly in elastic constant being deviated from the Curie-type softening was observed around 100-800 mK in (C₁₁-C₁₂)/2. This anomaly is unaffected by magnetic fields up to 14 T.     

Ultrasound irradiation as an effective tool in synthesis of the slag-based catalysts for carboxymethylation

Waste minimization strategy was applied in the current work for synthesis of the catalysts from industrial solid waste, namely desulfurization slag. The starting slag material comprising CaCO₃, Ca(OH)₂, SiO₂, Al₂O₃, Fe₂O₃, and TiO₂ was processed by various treating agents systematically varying the synthesis parameters. A novel efficient technique – ultrasound irradiation, was applied as an additional synthesis step for intensification of the slag dissolution and crystallization of the new phases. Physico-chemical properties of the starting materials and synthesized catalysts were evaluated by several analytical techniques. Treatment of the industrial slag possessing initially poor crystal morphology and a low surface area (6 m²/g) resulted in formation of highly-crystalline catalysts with well-developed structural properties. Surface area was increased up to 49 m²/g. High basicity of the neat slag as well as materials synthesized on its basis makes possible application of these materials in the reactions requiring basic active sites. Catalytic performance of the synthesized catalysts was elucidated in the synthesis of carbonate esters by carboxymethylation of cinnamyl alcohol with dimethyl carbonate carried out at 150 °C in a batch mode. Ultrasonication of the slag had a positive effect on the catalytic activity. Synthesized catalysts while exhibiting similar selectivity to the desired product (ca. 84%), demonstrated a trend of activity increase for materials prepared using ultrasonication pretreatment. The choice of the treating agent also played an important role in the catalytic performance. The highest selectivity to the desired cinnamyl methyl carbonate (88%) together with the highest activity (TOF₃₅ = 3.89*10⁻⁷ (mol/g*s)) was achieved over the material synthesized using 0.6 M NaOH solution as the treating agent with the ultrasound pre-treatment at 80 W for 4 h.     

Solvent-tuned ultrasonic synthesis of 2D coordination polymer nanostructures and flakes

Herein, a new 2-dimensional coordination polymer based on copper (II), {Cu₂(L)(DMF)₂}_n, where L stands for 1,2,4,5-benzenetetracarboxylate (complex 1) is synthesized. Interestingly, we demonstrate that both solvent and sonication are relevant in the top-down fabrication of nanostructures. Water molecules are intercalated in suspended crystals of complex 1 modifying not only the coordination sphere of Cu(II) ions but also the final chemical formula and crystalline structure obtaining {[Cu(L)(H₂O)₃]·H₂O}_n (complex 2). On the other hand, ultrasound is required to induce the nanostructuration. Remarkably, different morphologies are obtained using different solvents and interconversion from one morphology to another seems to occur upon solvent exchange. Both complexes 1 and 2, as well as the corresponding nanostructures, have been fully characterized by different means such as infrared spectroscopy, x-ray diffraction and microscopy.     

Ultrasound freeze-thawing style pretreatment to improve the efficiency of the vacuum freeze-drying of okra (Abelmoschus esculentus (L.) Moench) and the quality characteristics of the dried product

Vacuum freeze-drying is a new and high technology on agricultural product dehydrating dry, but it faces the high cost problem caused by high energy consumption. This study investigated the effect of ultrasound (US), freeze-thawing (including the freeze-air thawing (AT), freeze-water thawing (WT), freeze-ultrasound thawing (UST), and freeze-air ultrasound thawing (AT + US)) pretreatments on the vacuum freeze-drying efficiency and the quality of dried okra. The results indicated that the application of ultrasound and different freeze-thawing pretreatments reduced the drying time by 25.0%–62.50% and the total energy consumption was 24.28%–62.35% less. The AT pretreatment reduced the time by of okra slices by 62.50% and the total energy consumption was 62.35% less. The significant decrease in drying time was due to a change in the microstructure caused by pretreatment. Besides, the okra pretreated with the US retained most of the quality characteristics (flavor, color, hardness, and frangibility) among all methods, while, AT + US had the most changeable characteristics in quality, which is deprecated in our study. The okra pretreated with the US and AT, separately, had the best dry matter content loss (9.008%, 5.602%), lower chlorophyll degradation (5.05%, 5.44% less), and higher contents of total phenolics, total flavonoids, and pectin, with strong antioxidant capacity, compared to other methods. The pretreatments did not have a large effect on the functional groups and the structure of pectin, but slightly affected the viscosity. It can be concluded that AT and US pretreatment methods are better than others.     

Ultrasound-assisted fast encapsulation of metal microparticles in SiO2 via an interface-confined sol-gel method

Although the traditional Stoˇber process-based methods are widely used for encapsulation of metal nanoparticles in SiO₂, these time-consuming methods are not effective for coating metal microparticles with a uniform SiO₂ layer of desired thickness. Herein, an ultrasound-assisted, interface-confined sol–gel method is proposed for fast encapsulation of metal microparticles in SiO₂, and the encapsulation of Sn microparticles is chosen as an example to illustrate its feasibility. The proposed method involves covering metal microparticles with liquid films that contain water, alcohol, surfactant (Span-80) and catalyst (NH₄F) and then ultrasonically dispersing these particles into cyclohexane, where tetraethylorthosilicate (TEOS) is added. To ensure the hydrolysis-condensation reactions of TEOS occurring at the particle-cyclohexane interface so that the formed SiO₂ is coated on the particles, the microparticles should be well dispersed into cyclohexane with the liquid films being not broken away from their surfaces. It is found that the assistance of probe sonication and the addition of surfactant are crucial to achievement of a good dispersion of metal microparticles in cyclohexane. And using high-viscosity alcohol (namely glycerol), controlling the volume ratio of water to alcohol and the amount of water, and choosing a suitable ultrasonic power are essential for preventing the formation of free SiO₂ (namely SiO₂ that is not coated on the particles), which is a result that the liquid films escape from the particle surfaces under ultrasonic cavitation. Our results have also revealed that the thickness of SiO₂ layer can be adjusted by changing the reaction time or the total amount of water. In particular, the thickness of SiO₂ layer can be easily raised by simply repeating the encapsulation procedure. Compared with the traditional Stoˇber process-based methods, the proposed method is time-saving (reaction time: about 30 min vs. more than 12 h) and extremely effective for coating microparticles with a continuous, uniform SiO₂ layer of desired thickness.     

Synergic effects of ultrasound and ionic liquids on fluconazole emulsion

The aim of this work was to evaluate the influence of US on the properties of the fluconazole emulsions prepared using imidazolium-based ILs ([C_n C₁im]Br). The effects of the preparation method (mechanical stirring or US), US amplitude, alkyl chain length (of [C₁₂C₁im]Br or [C₁₆C₁im]Br), and IL concentration on the physicochemical properties were evaluated. Properties such as droplet size, span index, morphology, viscosity encapsulation efficiency, and drug release profile were determined. The results showed that US-prepared emulsions had a smaller droplet size and smaller polydispersity (Span) than those prepared by mechanical stirring. Additionally, the results showed that emulsions prepared with [C₁₆C₁im]Br and US had spherical shapes and increased stability compared to emulsions prepared by MS, and also depended on the IL concentration. The emulsion prepared by US at 40% amplitude had increased encapsulation efficiency. US provided a decrease in the viscosity of emulsions containing [C₁₂C₁im]Br; however, in general, all emulsions had viscosity close to that of water. Emulsions containing [C₁₆C₁im]Br had the lowest viscosities of all the emulsions. The emulsions containing the IL [C₁₆C₁im]Br had more controlled release and a lower cumulative percentage of drug release. The IL concentration required to prepare these emulsions was lower than the amount of conventional surfactant required, which highlights the potential synergic effects of ILs and US in preparing emulsions of hydrophobic drugs.     

In-situ synchrotron X-ray imaging of ultrasound (US)-generated bubbles: Influence of US frequency on microbubble cavitation for membrane fouling remediation

Gaining an in-depth understanding of the characteristics and dynamics of ultrasound (US)--generated bubbles is crucial to effectively remediate membrane fouling. The goal of present study is to conduct in-situ visualization of US-generated microbubbles in water to examine the influence of US frequency on the dynamics of microbubbles. This study utilized synchrotron in-line phase contrast imaging (In-line PCI) available at the biomedical imaging and therapy (BMIT) beamlines at the Canadian Light Source (CLS) to enhance the contrast of liquid/air interfaces at different US frequencies of 20, 28 and 40 KHz at 60 Watts. A high-speed camera was used to capture 2,000 frames per second of the bubble cavitation generated in water under the ultrasound influence. Key parameters at the polychromatic beamlines were optimized to maximize the phase contrast of gas/liquid of the microbubbles with a minimum size of 5.5 µm. ImageJ software was used to analyze the bubble characteristics and their behavior under the US exposure including the microbubble number, size, and fraction of the total area occupied by the bubbles at each US frequency. Furthermore, the bubble characteristics over the US exposure time and at different distances from the transducer were studied. The qualitative and quantitative data analyses showed that the microbubble number or size did not change over time; however, it was observed that most bubbles were created at the middle of the frames and close to the US field. The number of bubbles created under the US exposure increased with the frequency from 20 kHz to 40 kHz (about 4.6 times). However, larger bubbles were generated at 20 kHz such that the average bubble radius at 20 kHz was about 6.8 times of that at 40 kHz. Microbubble movement/traveling through water was monitored, and it was observed that the bubble velocity increased as the frequency was increased from 20 kHz to 40 kHz. The small bubbles moved faster, and the majority of them traveled upward towards the US transducer location. The growth pattern (a correlation between the mean growth ratio and the exposure time) of bubbles at 20 kHz and 60 W was obtained by tracking the oscillation of 22 representative microbubbles over the 700 ms of imaging. The mean growth ratio model was also obtained.     

Intensified sonochemical degradation of 2-Picoline in combination with advanced oxidizing agents

2-picoline is a very important pyridine derivative with significant applications though it is also poisonous and harmful having considerable adverse influence on aquatic life, environment and organisms. The need for developing effective treatment methodologies for 2-Picoline directed the current work focusing on degradation of 2-Picoline using the combination of ultrasound and advanced oxidants such as hydrogen peroxide (H₂O₂), potassium persulphate (KPS), Fenton’s reagent, and Peroxymonosulphate (PMS) along with the use of Titanium oxide (TiO₂) as catalyst. Ultrasonic bath having 8 L capacity and operating frequency of 40 ± 2 kHz has been used. The effect of parameters like power, initial pH, temperature, time and initial concentration of 2-Picoline were studied to establish best operating conditions which were further used in the combination treatment approaches of ultrasound with oxidising agents. The chemical oxygen demand (COD) reduction for the optimized approaches of ultrasound in combination with oxidizing agents was also determined. Degradation experiments were performed using oxidising agents also in absence of ultrasound to investigate the individual treatment capacity of the oxidants and also the synergetic index for the combination. Kinetic study demonstrated that second order model suited for all the treatment approaches except US/Fenton where first order model fitted better. Ultrasound in combination with Fenton reagent demonstrated a substantial synergy for the degradation of 2-Picoline compared to other treatment approaches showing highest degradation of 97.6 %, synergetic index as 5.71, cavitational yield of 1.82 × 10⁻⁵ mg/J and COD removal of 82.4 %.     

Ultrasound irradiation alters the spatial structure and improves the antioxidant activity of the yellow tea polysaccharide

In this study, the impact of ultrasound irradiation on the structural characteristics and antioxidant properties of yellow tea polysaccharides with different molecular weights (Mw) were investigated. Native yellow tea polysaccharide containing YTPS-3N, YTPS-5N and YTPS-7N were prepared through precipitation with ethanol at various concentrations of 30%, 50%, and 70%, respectively, and irradiated with high intensity ultrasound (20 kHz) for 55 min to yield yellow tea polysaccharide including YTPS-3U, YTPS-5U and YTPS-7U. The molecular weight (Mw) of YTPS-3N (from 37.7 to 15.1 kDa) and YTPS-5N (from 14.6 to 5.2 kDa) sharply decreased upon ultrasound irradiation, coincidentally particle size (Zavg) was also significantly reduced for YTPS-3N (40%), YTPS-5N (48%) and YTPS-7N (54%). The high-performance liquid chromatography and Fourier transform-infrared spectroscopy analysis revealed a partial degradation of native yellow tea polysaccharide treated with ultrasound, though the monosaccharide composition was not altered. Furthermore, changes in morphology and the breakdown of native yellow tea polysaccharide upon irradiation was confirmed with the circular dichroism spectrum, atomic force and scanning electron microscopy. As a consequence, irradiation of yellow tea polysaccharide increased free radical scavenging activity with YTPS-7U exhibiting the highest levels of 2, 2-diphenyl-1-picrylhydrazyl free radical, superoxide and hydroxyl radicals scavenging activity. These results suggest that the alteration of the spatial structure of yellow tea polysaccharide can enhance its antioxidant activity which is an important property for functional foods or medicines.