Synthesis of organosilyl compounds-containing 1,2,4,5-tetraaryl imidazoles sonocatalyzed by M/SAPO-34 (M = Fe,Co, Mn,and Cu) nanostructures

The one-step synthesis of silylated 1,2,4,5-tetraaryl imidazoles by use of a series of M/SAPO-34 (M: Fe, Co, Mn, and Cu) nanocatalysts and subsequent silylation reactions is described. Cu/SAPO-34 catalyst has the highest activity in improving the efficiency of the heterogeneous cyclo-condensation of an aldehyde, benzil, ammonium acetate and a primary aromatic amine in water under ultrasonic irradiation. Some of imidazole derivatives are studied with a view to the synthesis of a series of new, multi-substituted imidazoles containing organosilyl groups including carbosilanes (Si–C) and silyl ethers (Si–O).     

超声萃取-高效液相色谱法同时测定人造革中7种苯并三唑类紫外线吸收剂含量

建立了超声萃取-高效液相色谱法(HPLC)同时测定人造革中7种苯并三唑类紫外线吸收剂UV-P、UV-326、UV-327、UV-329、UV-350、UV-320和UV-328含量的方法。该方法以甲醇为萃取溶剂,超声萃取人造革中的苯并三唑类紫外线吸收剂,萃取液经处理后直接进行HPLC分析,外标法定量。在信噪比(S/N)=3的条件下,UV-P、UV-326、UV-327、UV-329、UV-350的检出限均为0.05mg/kg,UV-320、UV-328的检出限均为0.10 mg/kg。在3个不同加标浓度水平下,各组分的平均加标回收率为88.19%~98.32%,相对标准偏差(RSD)为0.61%~3.74%。该方法简便快捷、灵敏度高,可用于人造革中苯并三唑类紫外线吸收剂的测定。采用该方法对市售人造革样品进行测定,结果在6个样品中检出了不同浓度水平的UV-P和UV-329。     

宽音频扫描加载的电子剪切散斑技术在多层粘接板结构无损检测中的应用

本文利用宽音频自动扫描加载的电子剪切散斑干涉技术对多层粘接板结构进行了时实检测，结果表明，这种方法能够同时测定板的多个位置、大小和形状各不相同缺陷，迅速准确地对多层粘接板结构质量作出判断，同时根据到试过程中记录的共振频率等各种信息，可以进一步对被测部分的振动位移及缺陷深度进行定量分析．     

Determination of Bone Trabeculae Modulus—An Ultrasonic Scanning and MicroCT (μCT) Imaging Combination Approach

To date, there is no method to measure non-destructively the modulus of trabeculae within cancellous bone, whilst retaining its structural integrity. In this study ultrasonic scanning, coupled with microCT imaging, is employed to determine trabeculae modulus along the three major anatomical axes non-destructively. The proposed method allows cancellous bone specimens to remain intact, for possible use in subsequent studies. Volume rendering of the microCT images allows three-dimensional visualization of cancellous bone specimens to be tested. This facilitates trabeculae selection and accurate measurement of distance traveled by the ultrasonic wave, thus yielding a good degree of confidence in the acoustic velocity measured. For all the three principal anatomical directions, the measured acoustic speeds ranged from 2,115 to 3,077 m/s, giving an average of 2,505 m/s. Average wave velocities in the superior–inferior, medial–lateral and anterior–posterior anatomical directions were found to be 2,295, 2,469 and 2,754 m/s, respectively; the differences corresponding to the three directions do not appear to be significant. Subsequently, the modulus was then determined using elastic wave propagation theory.     

碳纤维悬挂支臂疲劳损伤实验研究

对碳纤维复合材料某型飞机垂直尾翼方向舵悬挂支臂完成了谱载疲劳、冲击损伤、损伤扩展和剩余强度试验，采用超声波检查方法对其全过程的损伤状态进行了跟踪实验研究，其结果与位移等试验一致．     

高效液相色谱-电感耦合等离子质谱法分析海洋沉积物中有机锡的形态

建立了高效液相色谱-电感耦合等离子质谱(HPLC-ICP-MS)测定海洋沉积物中二丁基锡(DBT)、三丁基锡(TBT)、二苯基锡(DPhT)及三苯基锡(TPhT)的形态分析方法。通过改变流动相组分比例,使4种有机锡达到基线分离。比较不同提取方法对标准参考物质PACA-2中有机锡的提取效率。以V(乙腈)∶V(H2O)∶V(乙酸)=55∶33∶12(含5%三乙胺,pH 3.0)为提取剂时,超声提取效率最高(>91.5%),其加标回收率均大于96%。本方法对DBT,TBT,DPhT和TPhT的检出限分别达到0.7,0.75,0.45和0.4μg/kg。对浓度范围为0.5～100μg/kg有机锡混合标准溶液进行测定,4种有机锡回归系数均大于0.998。利用本方法对几种海洋沉积物样品和海产品中的有机锡进行测定,在部分沉积物样品中检测到了DBT和TBT,部分海产品中测到了少量TBT和TPhT。     

超声搅拌化学浴沉积法制备大颗粒和致密的CdS薄膜

采用超声搅拌化学浴法(UCBD)在SnO2:F透明导电玻璃衬底上制备了CdS薄膜.研究了退火和CdCl2处理对UCBD-CdS薄膜的表面形貌、晶体结构和直接带隙的影响,比较了沉积时间对UCBD-CdS薄膜中CdS聚集体颗粒大小和堆积致密性的影响.结果表明,CdCl2处理可使CdS聚集体中的小颗粒重新熔合在一起,但CdS聚集体的大小并没有改变.在UCBD-CdS薄膜的沉积过程中,CdS薄膜的横向和纵向生长速率之比会随着沉积时间的不同而改变,且沉积时间是获得大颗粒的CdS聚集体和致密的UCBD-CdS薄膜的重要影响因素.当沉积时间为40min时,获得的UCBD-CdS薄膜较致密,CdS聚集体的大小为180nm,膜厚为80.8nm,适合作为薄膜太阳电池的窗口层.     

Fast Electrochemical Characterization of Historical Glasses Using Carbon Screen‐Printed Electrodes and Ultrasonic Assisted Sampling

A new method for lead oxide (PbO) analysis in glasses, using a carbon screen printed electrode (SPE) is proposed. A suspension of the powdered glass sample in nitric acid is prepared using an ultrasonic probe, 100 µL of slurry are deposited on the SPE and the voltammetric measurement is carried out. Structural information of PbO in the glass matrix is obtained by CV. Lead quantification is performed by DPV. In the best conditions a LOD of 2.30 wt% of PbO was obtained. The method has been applied with good results in the analysis of historical glasses samples.     

Fast determination of the functional peptide soymetide in different soybean derived foods by capillary-high performance liquid chromatography

The determination of bioactive peptides derived from food sources is gaining special attention in last years, due to their ability to promote health and their potential to reduce the risk of chronic diseases. In this work, a new analytical methodology has been developed enabling for the first time the determination of soymetide, a new immunostimulating peptide derived from soybean, in different soybean derived foodstuffs. Capillary-HPLC was employed for peptide separation after accelerated tryptic digestion of soybean proteins. Two different capillary-HPLC columns were tested and chromatographic separation was optimized in each case. The use of a 300 μm fused-core technology C18 column enabled a suitable separation of soymetide from the other peptides in less than 18 min. Different analytical characteristics of the method were evaluated: selectivity, linearity, accuracy, precision, limit of detection and quantitation, and stability. The developed method was applied to the determination of soymetide content in different soybean dairy-like products for human consumption (powdered milks and infant formulas).     

基于LMS自适应时延估计和FPGA的超声波测风系统研究

利用超声波传感器进行风速测量时,温度对超声波传播有很大影响,时延估计对超声波测风系统的精度起到很大的作用。本超声波测风系统为避免温度对风速测量中的影响,采用了基于时差法的测量原理,为了提高时延估计值的精度,提出了基于最小均方(LMS)自适应时延估计的测量方法,研制了以单片机Atmega128和现场可编程门阵列(FPGA)为核心的硬件系统。仿真和实际测试的结果表明,该超声波测风系统的时延估计值精确度较高,具有很高的应用价值。