基于互注入半导体激光器的混沌输出产生17.5 Gbit/s随机码

采用两个借助光纤连接的相互注入半导体激光器,实验获取了10 GHz超宽带混沌种子信号.通过8-bit模数转换器将混沌信号转换为二进制数据流,并进行进一步的逻辑异或处理和舍弃最高有效位操作,最终获得了能顺利通过美国国家标准与技术研究院(National Institute of Standard and Technology,简记为NIST)800-22标准测试以及Diehard测试,速率达17.5 Gbit/s的高速随机码. 关键词： 随机码 混沌激光 互注入半导体激光器     

原子玻色-爱因斯坦凝聚体对V型三能级原子激光压缩性质的影响

利用格子液体方法对V型三能级原子玻色-爱因斯坦凝聚体与双模压缩相干态光场相互作用系统的哈密顿量进行分析,发现文献中对原子间相互作用部分的处理有不合理之处,从而对该哈密顿量作出了改进并研究了V型三能级原子玻色-爱因斯坦凝聚体与双模压缩相干态光场相互作用系统中原子激光的两个正交分量的压缩性质.研究表明:V型三能级原子玻色-爱因斯坦凝聚体中光场-原子相互作用强度对原子激光的两正交分量的涨落有明显的影响. 关键词： 玻色-爱因斯坦凝聚 V型三能级原子 压缩相干态 压缩原子激光     

氧分压对Mg掺杂ZnO薄膜结晶质量和光学特性的影响

利用脉冲激光沉积技术,通过改变沉积过程中的氧气压力,在蓝宝石(0001)基片上制备了一系列ZnMgO合金.通过X射线衍射、反射和透射光谱以及室温和变温荧光光谱,对薄膜的结构和光学性能进行了系统地表征,分析了工作气压对ZnMgO合金薄膜的结晶质量及光学特性的影响.研究结果表明:随着沉积环境中氧气压力的增大,ZnMgO薄膜的结晶质量下降,富氧环境下,与蓝宝石晶格平行的ZnO晶粒的出现是导致薄膜结晶质量下降的主要原因;相对于本征ZnO,不同氧气环境下沉积的ZnMgO薄膜的紫外荧光峰均出现了不同程度的蓝移.随着工 关键词： ZnO Mg掺杂 脉冲激光沉积 薄膜生长 光学特性     

掺Er光纤飞秒激光器载波包络位相偏移的探测

本文介绍了基于掺Er光纤飞秒激光器光学频率梳中光学部分的研制. 实验上采用重复频率为230 MHz的掺Er光纤飞秒激光器,通过放大、光谱展宽以及单臂f—2f系统,在优化及分析相关参数影响的基础上,获得了~30 dB信噪比f₀的输出,为光纤光学频率梳的建立奠定了基础. 关键词： 掺Er光纤激光器 光学频率计量 光纤光学频率梳 光谱展宽     

基于双芯光纤耦合器的梳状滤波器及其CO2激光调节

基于光纤耦合器的波长特性,分析了光纤耦合器作为梳状滤波器的光谱特性;将长度不同的双芯光纤(twin-core fiber,TCF)熔接在两根单模光纤(single mode fibors,SMF)之间,实验制得具有不同峰值波长间隔的基于双芯光纤耦合器的全光纤型梳状滤波器,其消光比可达25 dB. 首次使用CO₂激光对其进行光谱调节,调节导致光谱向长波方向漂移和消光比的变化. 这种调节是基于CO₂与光纤相互作用时的残余应力释放和熔融变形机理,使用氢载TCF可以在相同实验参数下得到更大的波长调节激光. 关键词： 双芯光纤耦合器 梳状滤波器 2激光')" href="#">CO₂激光 残余应力     

Embedded dots inside glass for optical film using UV laser of ultrafast laser pulse

Microstructures are usually fabricated on the surface of optical sheets to improve the optical characteristics. In this study, a new fabrication process with UV (ultraviolet) laser direct writing method is developed to embed microstructures inside the glass. Then the optical properties of glass such as reflection and refraction indexes can be modified. Single- and multi-layer microstructures are designed and embedded inside glass substrate to modify the optical characteristics. Both luminance and uniformity can be controlled with the embedded microstructures. Thus, the glass with inside pattern can be used as a light guide plate to increase optical performance. First, an optical commercial software, FRED, is applied to design the microstructure configuration. Then, UV laser direct writing with output power 2.5-2.6 W, repetition rate 30 kHz, wave length: 355 nm, and pulse duration 15 ns is used to fabricate the microstructures inside the glass. The effect of dot pattern in the glass such as the dot pitch, the layer gap, and the number of layer on the optical performance is discussed. Machining capacity of UV laser ranges from micron to submicrometer; hence with this ultrafast laser pulse, objectives of various dimensions such as dot, line width, and layers can be easily embedded in the glass by one simple process. In addition, the embedded microstructures can be made with less contamination. Finally, the optical performance of the glasses with various configurations is measured using a Spectra Colorometer (Photo Research PR650) and compared with the simulated results.     

Long distance laser ultrasonic propagation imaging system for damage visualization

Wind turbine blade failure is the most prominent and common type of damage occurring in operating wind turbine systems. Conventional nondestructive testing systems are not available for in situ wind turbine blades. We propose a portable long distance ultrasonic propagation imaging (LUPI) system that uses a laser beam targeting and scanning system to excite, from a long distance, acoustic emission sensors installed in the blade. An examination of the beam collimation effect using geometric parameters of a commercial 2 MW wind turbine provided Lamb wave amplitude increases of 41.5 and 23.1 dB at a distance of 40 m for symmetrical and asymmetrical modes, respectively, in a 2 mm-thick stainless steel plate. With this improvement in signal-to-noise ratio, a feasibility study of damage detection was conducted with a 5 mm-thick composite leading edge specimen. To develop a reliable damage evaluation system, the excitation/sensing technology and the associated damage visualization algorithm are equally important. Hence, our results provide a new platform based on anomalous wave propagation imaging (AWPI) methods with adjacent wave subtraction, reference wave subtraction, reference image subtraction, and the variable time window amplitude mapping method. The advantages and disadvantages of AWPI algorithms are reported in terms of reference data requirements, signal-to-noise ratios, and damage evaluation accuracy. The compactness and portability of the proposed UPI system are also important for in-field applications at wind farms.     

Lead-free ferroelectric BaTiO3 doped-(Na0.5Bi0.5)TiO3 thin films processed by pulsed laser deposition technique

The difficulties in synthesizing phase pure BaTiO₃ doped-(Na_0.5Bi_0.5)TiO₃ are known. In this work, we reporting the optimized pulsed laser deposition (PLD) conditions for obtaining pure phase 0.92(Na_0.5Bi_0.5)TiO₃-0.08BaTiO₃, (BNT-BT_0.08), thin films. Dielectric, ferroelectric and piezoelectric properties of BNT-BT_0.08, thin films deposited by PLD on Pt/TiO₂/SiO₂/Si substrates are investigated in this paper. Perovskite structure of BNT-BT_0.08 thin films with random orientation of nanocrystallites has been obtained by deposition at 600 °C. The relative dielectric constant and loss tangent at 100 kHz, of BNT-BT_0.08 thin film with 530 nm thickness, were 820 and 0.13, respectively. Ferroelectric hysteresis measurements indicated a remnant polarization value of 22 μC/cm² and a coercive field of 120 kV/cm. The piezoresponse force microscopy (PFM) data showed that most of the grains seem to be constituted of single ferroelectric domain. The as-deposited BNT-BT_0.08 thin film is ferroelectric at the nanoscale level and piezoelectric.     

Enhanced dielectric permittivity in poly (vinylidene) fluoride/multiwalled carbon nanotubes nanocomposite thin films fabricated by pulsed laser deposition

The fabrication of high quality thin films of poly (vinylidene fluoride) embedded with multiwalled carbon nanotubes using pulsed laser deposition technique is reported. The prepared films were characterized for structural, morphology and dielectric properties. The morphology analysis revealed uniform dispersion of multiwalled carbon nanotubes throughout the polymer matrix. X-ray diffraction results suggested that the poly (vinylidene fluoride) film is in amorphous phase while addition of multiwalled carbon nanotubes showed presence of crystalline peaks in the nanocomposites films. It was interesting to note that the nanocomposite films exhibits significant enhancement of the ferroelectric β-phase as evidenced by the X-ray diffraction and Fourier transform infrared spectroscopy results. The dielectric analysis shows a remarkable enhancement in the dielectric permittivity of nanocomposites with lower loss and conductivity level. The results can be attributed to the formation of minicapacitor network and relatively higher percolation threshold in the nanocomposites.     

Fabrication and lithium electrochemistry of InSe thin film

InSe thin film has been successfully fabricated by pulsed-laser deposition method. Electrochemical behavior of Li/InSe cell has been investigated by Galvanostatic cycling and cyclic voltammetry measurements for the first time. The reversible capacity of InSe electrode of 410 mAh/g with the volumetric capacity of about 3302 mAh/cm³ was achieved at a current density of 0.05 mA/cm². By using XRD and XPS measurements, both alloying/de-alloying processes and selenidation/reduction processes were revealed during the electrochemical cycling of InSe thin film electrode. InSe was found to be a novel candidate of anode materials for rechargeable lithium batteries.