Determination of Labile Iron at Low nmol L−1 Levels in Estuarine and Coastal Waters by Anodic Stripping Voltammetry

A new method is presented for the determination of electrochemically labile iron in estuarine and coastal seawater. The method is based on differential pulse anodic stripping voltammetry (DPASV) at a rotating silver‐alloy disk electrode. The voltammetric parameters include a plating potential of ?1.5 V and an activation potential of ?5 V for 10s; the seawater is at the original sample pH. The main finding is the presence of a peak for low nmol L^?1 levels of iron at ?0.55 V ascribed to elemental iron deposited on the bare silver alloy electrode. The peak increased linearly with the iron concentration between <1 and 14 nmol L^?1 using a 900 s plating time. At higher concentrations an additional iron peak appeared at ?0.7 V which was also found to increase linearly with the iron concentration but at a higher concentration range from ca. 15 to 90 nmol L^?1 using a 300 s plating time. The second peak was ascribed to iron deposited on iron. Additions of chelating agents (EDTA and a siderophore) to seawater caused the iron peak to be masked indicating that this method is suitable for iron speciation as only the electrochemically labile fraction is determined. The detection limit was 0.3 nmol L^?1 using a 900 s plating time. The method was used to determine iron in the range of 5 to 50 nmol L^?1 in samples from the Mersey estuary near Liverpool and its potential use for in situ monitoring was demonstrated by using it to monitor labile iron (at 2–3 nmol L^?1) over a period of 4 days at 1 h intervals in coastal waters in the Trondheim fjord, Norway.     

The effect of H2S concentration on the corrosion behavior of API 5L X-70 steel

This work presents electrochemical data measured during the corrosion of API 5L X-70 pipeline steel immersed in aqueous environments containing dissolved H₂S. Three different electrolyte were used: a 3 wt% NaCl solution containing 100, 650 and 2,550 ppm of H₂S respectively. The corrosion of steel is described by means of electrochemical impedance spectroscopy. The electrochemical data obtained from the steel monitoring are presented in terms of Nyquist plots. The influence of the total H₂S concentration as well as the effect of temperature on the corrosion of API 5L X-70 steel were also studied. In the presence of H₂S the R_ct values decrease as the H₂S concentration increases.     

Reaction of 3-Acetyl-4,6,6-trimethyl-5,6-dihydro-2-pyrone with Carboxylic Acid Hydrazides

The reaction of 3-acetyl-4,6,6-trimethyl-5,6-dihydro-2-pyrone with the hydrazides of a series of carboxylic acids led to the synthesis of 5-alkyl(cyanomethyl)carbonyl-3,5a,7,7-tetramethylpyrazolino-4,5-c]tetrahydro-2-pyrones, which are the products from cyclization of the intermediately formed alkyl(cyanomethyl)hydrazones of 3-acetyl-4,6,6-trimethyl-5,6-dihydro-2-pyran. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 998–1001, July, 2005.     

氢化物发生原子荧光光谱法测定铅基合金中砷

建立了以HG-AFS测定铅基合金样品中砷的简单方法,研究了共存元素可能引起的干扰并成功地加以解决,优化了氢化物发生条件及仪器的工作参数。KBH4最优浓度为1.0%(m/V),样品溶液和载流中HCl的最优浓度分别为10%(V/V)和5%(V/V)。实验表明,当硫脲存在时,Cu不干扰As的测定;Sb、Sn和Bi引起的干扰可以通过0.5%(m/V)KMnO4溶液在线吸收相应的氢化物加以消除。通过测定铅基合金标准样品以检验方法的准确性,由标准加入法得到的结果与标准值吻合。本方法的检出限为0.17μg/L,对40μg/LAs标准溶液连续测定11次的相对标准偏差为1.45%。     

Coumarin-conjugated cyclodextrins: remarkable enhancement of the chemical-to-light energy transfer efficiency

One or two coumarin units were incorporated to the primary face of γ-cyclodextrin (γ-CD), and the resultant coumarin derivatives were employed to harvest the chemical energy generated in the reaction of bis(trichlorophenyl)oxalate with hydrogen peroxide. In comparison with the coumarin without CD cavity for molecular recognition, the coumarin–CD conjugates demonstrated much higher chemiluminescence inetensity, indicating that the CD moiety remarkably improves the chemical energy transfer.     

Products of hydrolysis of C,N-chelated triorganotin(IV) chlorides and use of products as catalysts in transesterification reactions

Triorganotin(IV) chlorides containing one L^CN chelating ligand were hydrolyzed with an excess of sodium hydroxide. The composition of the products is strongly dependent on the nature of the organic groups bound to the tin atom. Di(n-butyl)tin, dimethyltin as well as the diphenyl derivative exhibits an equilibrium between hydroxide and stannoxane forms (oxide), whereas alkyltin species react spontaneously and reversibly with carbon dioxide present in the air to form carbonate species. On the other hand, diphenyl derivatives display virtually no reaction with CO₂ towards carbonates, while the di-t-butyl-substituted tin derivative is stable under the same experimental condition and remains as a tin hydroxide. In the case of the dimethyltin derivative, a methyl group migration was observed with displacement of one L^CN chelating ligand during the reaction on the air. The coordination geometry of the tin central atom(s) of all studied compounds can be described as trigonal bipyramidal with a dative bonded dimethylamino group occupying one coordination site. The catalytic activity of these compounds in transesterification reactions is generally lower compared to the systems reported in the literature, with the exception of the transesterification of ethyl acetate by cyclohexanol which displays a remarkable activity.     

Analysis to obtain precise density fluctuation of supercritical fluids by small-angle X-ray scattering

A procedure of analysis for small-angle X-ray scattering (SAXS) data has been established to obtain density fluctuation of supercritical fluids near the critical point. It is indispensable for the certain analysis to utilize both of high-quality SAXS data measured under stable thermodynamic condition and accurate P–ρ–T data in supercritical region. As a standard example, SAXS measurements have been performed for supercritical CO₂, which is a suitable sample satisfying the condition for both experiment and analysis. The measurements were carried out along four isothermal conditions at reduced temperature of T_r = T/T_c = 1.020, 1.022, 1.043 and 1.064. Comparing the experimental density fluctuation with calculated one from the most reliable equation of state, the differences are within 8% at most.     

Tl2O3/聚-N-乙烯基咔唑复合纳米线的研究

Stable monolayers of electropolymerized poly-N-vinylcarbazole (EPVK) and arachidic acid(AA) are obtained on a subphase of alkaline Tl2O3 colloidal solutions. As revealed by the atomic force microscope, there is phase separation in the mixed LB monolayers. Transmission electron microscopic observations reveal that ordered arrays of composite Tl2O3/Epvk nanowires are formed in the mixed monolayers. Formation of the composite nanowire arrays is attributed to the ordered adsorption of Tl2O3 colloidal particles along the polycationic EPVK chains. The composite nanowire array is 3.2nm wide with a spacing of 2.7nm.The composite nanowire arrays can also be formed when pure EPVK is used. Composite LB multilayers of Tl2O3/EPVK nanowire arrays are prepared. The bilayer spacing is 5.54nm.The present study is of importance to the fabrication of inorganic semiconductor/functional polymer composite nanowires.     

Determination of hydrochloric acid in organic solutions by gas chromatography

Summary A method is described for the determination of small quantities of hydrochloric acid in two chlorinated organic solvents (CHCl₃ and CCl₄). An excess of gaseous ethylene oxide is added to a liquid sample; the 2-chloroethanol formed is then analyzed by gas chromatography. The procedure is simpler and more sensitive in comparison with other conventional methods. It can be modified for other organic solvents.D.G.R.C.S.T. grant.     

Structure and hydration of polycytidylic acid from the data of infrared spectroscopy, EHF dielectrometry and computer modeling

The aim of this paper is to summarize the original results concerned with the elucidation of the role of water environment in the formation of different structures of polyribocytidylic acid (poly(rC)), depending on the pH, temperature and ion content. To solve this problem, we studied the hydration of poly(rC)-K⁺ in films differing in water content, by methods of infrared spectroscopy and piezogravimetry, and in solution, using the dielectric measurements at a wavelength of 7.6 mm (extremely high frequencies — EHF). The experimental results were confirmed by a Monte Carlo simulation of the interaction between water molecules and single-strand and double-strand poly(rC) fragments in clusters of 800 water molecules. A model of hydration of double-strand complex of poly(rC)⁺-poly(rC) has been proposed based on our results and the known X-ray parameters of the complex. The obtained results and proposed structure of poly(rC)⁺-poly(rC) suggest that, the stabilization of this complex occurs due to intra- and inter-chain water bridges, together with the hydrogen bonds between neutral and protonated cytosines in pairs.