稀土在低硫铌钛钢中的作用

在实验条件下采用50kg真空感应炉炼和两段控制轧制工艺，并采用WE－60型万能拉伸试验机，JB－30B型冲击试验机，MM6型及OLYMPUS－PME3型光学金相显微镜，IBAS－2000图相分析等手段研究了稀土对低硫铌钛钢性能，组织及夹杂物的影响。在低硫铌钛钢中的试验结果表明，稀土元素的加入使力学性能变化各异，它使钢的横向屈服点和抗拉强度先下降而后上升；延伸率则无下降而后上升；稀土对钢的横向冲击功则表现为先上升而后下降，并且在－20℃以上，适量的稀土加入可以明显改善其冲击功的各向异性；稀土的加入并不能改变钢的显微组织类型，钢的组织为铁素体＋珠光体，但稀土会使钢中珠光体数量增加，铁素体数量减少，在钢中夹杂物方面，稀土加入则表现为它一方面 化钢液，使钢中夹杂物数量减少，另一方面是使钢中夹杂物的颗粒球化，细化和弥散化，从而改善夹杂物的分布。     

激发态Ti＋(3d14s2)与丙炔醇气相反应理论研究

用量子化学密度泛函(DFT)方法研究了激发态Ti^＋(3d¹4s²)与丙炔醇(PPA)气相反应的机理. 在B3LYP/DZVP水平上, 优化了反应的两个通道的反应物、中间体、过渡态和产物的几何构型, 并在MP4/[6-311＋G**(C,H,O)＋Lanl2dz (Ti)]水平上计算了各驻点的单点能量. 为了确证过渡态的真实性, 在B3LYP/DZVP水平上进行了内禀坐标(IRC)计算和频率分析, 获得了二重态反应势能面, 确定了反应机理. 研究结果表明生成产物为[C₃H₃O]^＋和Ti—H的通道是主要反应途径.     

Fabrication of PbTiO3 Ceramic Fibers by Sol-Gel Processing

The sol-gel processing was applied to the fabrication of PbTiO₃ fibers. Pb(CH₃COO)₂·3H₂O and Ti(OC₃H ₇ ⁱ )₄ were refluxed with stirring in 2-methoxyethanol to form Pb-methoxyethoxide and Ti-methoxyethoxide, respectively, followed by mixing with stirring in 2-methoxyethanol to form Pb−Ti double alkoxide. The hydrolysis and polycondensation reaction of this double alkoxide gave polymerized products, and as a result the viscosity of the solution increased, suggesting that linear polymers were produced through the hydrolysis and polycondensation reaction. Homogeneous PbTiO₃ gel fibers were drawn from the spinnable viscous solutions, which were wellcrystallized into perovskite type PbTiO₃ at 650°C. The heat-treated fibers were a few centimeters long and from 10 to 100 μm in diameter. The fiber was made up of extremely uniform grains. Electron diffraction revealed a preferred growth of (101) planes along the fiber axis, which might be due to the linear molecular characteristics of the alkoxide.     

丁二烯催化环化三聚中多金属的协同效应

研究了第二过渡金属化合物对ＴｉＣｌ４／ＡｌｅＴ１．４６ｃＬ１．５４催化丁二烯环化三聚的多金属协同效应。结果表明，极少量的第二过渡金属化合物，如Ｃｒ，（ａｃａｃ）３，Ｍｎ（ａｃａｃ）３，ＮｉＣｌ２，ＺｒＣｌ４等加入ＴｉＣｌ４／ＡｌＥｔ１．４６Ｃｌ１．５４体系后不同程度地提高了丁二烯环化三聚的选择性，并改变了体系的最大速率和催化剂效率。     

HMS和NaY固载酒石酸钛配合物的研究

利用化学键合和“瓶中造船”方法,成功地将酒石酸钛配合物接枝到HMS(heragonal mesoporous silicas)上或包络合于微孔NaY内.FT-IR表征表明酒石酸钛在HMS上是通过与载体表面羟基发生交换作用而被固载的;在NaY载体上则是通过包络合被封装在载体的超笼内.UV-Vis可见漫反射表征表明两类固载型催化剂有着相似的钛配位环境.在催化肉桂醇环氧化反应中,HMS键合型催化剂的反应转化率比NaY包络型催化剂的高;但后者在环氧化选择性上要高于前者.回收样品的重复使用实验结果表明,两类固载型催化剂在重复使用过程中均存在不同程度的失活.     

硫酸介质中Ti／SnO2／PbO2析氧阳极的研究

由于硫酸溶液具有高的电导、一般条件下性质稳定、价格相对低廉等优点，所以电化学合成大多在硫酸溶液中进行．阳极析氧是电化学合成不可避免的阳极过程．但因硫酸的强腐蚀性，以及从阳极析出的氧的强氧化性，使得能满足工业生产的阳极材料很缺乏．自１９５０年荷兰Ｈｅｎ...     

Al3Ti1B1RE细化剂对罐用铝材的细化效果及稀土的作用

采用XRD，OM，SEM，EDAX等探讨了一种新型Al3Ti1B1RE中间合金细化剂对罐用铝材的细化效果及RE的作用。结果表明，该细化剂对罐用铝材的细化效果优于进口和国产Al3Ti1B，且具有长效性，达6h后仍未见明显衰退，明显提高了该材料的强度和塑性；其细化效果及稳定性好的主要原因是：RE可降低铝液的表面能，增加铝液对细化核心(如TiAl3，TiB2)的润湿性，既充分发挥了异质形核作用，又防止了TiB2聚集沉淀倾向；RE也极易在结晶前沿富集造成成分过冷，阻碍了α-Al晶粒生长，并促进其在细化核心上形核；此外RE还兼有一定的净化、细化和变质作用，尤其是净化作用提高了该细化剂的冶金质量。     

光电催化降解邻苯二甲酸二乙酯的研究

采用sol-gel法制备TiO2薄膜光电极，以该电极为工作电极，铂丝作对电极，饱和甘汞电极为参比电极，对邻苯二甲酸乙酯的光电催化降解进行了研究。结果表明：该电极具有n型半导体的特征行为，在外加偏压为＋0．7v、pH=2、50mg／L的H2O2中对初始浓度为50mg／L的DEP溶液光照180min降解率达67．85％，讨论了氧的存在、外加偏压等因素对光电催化反应的影响。     

Synthesis of inorganic-organic hybrids by incorporation of inorganic components into organic polymer using metal alkoxides

Inorganic-organic hybrids have been synthesized by incorporation of the inorganic component of Ti(OC₂H₅)₄ into the organic polymer of ethyl cellulose. The inorganic-organic hybrids did not dissolve in toluene used as a solvent for the starting materials. The ethanol was formed as a by-product of the alcoholysis condensation reaction between Ti(OC₂H₅)₄ and ethyl cellulose. These results suggest that ethoxy groups of Ti(OC₂H₅)₄ react with hydroxy groups of ethyl cellulose to form cross-linking bonds of –O–Ti–O–. The reaction of Ti(OC₂H₅)₄ with ethyl cellulose was further investigated by Fourier transform infrared (FT-IR) spectroscopy. The FT-IR spectroscopic experiments revealed that the Ti–O bond state of Ti(OC₂H₅)₄ was changed by refluxing a toluene solution of Ti(OC₂H₅)₄ with ethyl cellulose. The inorganic-organic hybrids have an interesting dielectric property; their dielectric constant is higher than that of ethyl cellulose and that of a simple mixture of TiO₂ and ethyl cellulose.     

掺Ti球磨NaH/Al复合物的微结构和储氢特性

本文采用机械球磨法制备了(NaH/Al)+x(摩尔分数, %)Ti(x=0, 4, 6, 10)复合物, 研究了不同球磨气氛和Ti催化剂含量对其微结构和储氢性能的影响, 使球磨(NaH/Al)体系储氢的容量达到质量分数为4.01%.