Coupled Thermo-Hydro-Mechanical and Chemical Analysis of Expansive Clay Subjected to Heating and Hydration

A fully coupled formulation combining reactive transport and an existing thermo-hydro-mechanical (THM) code is presented. Special attention has been given to phenomena likely to be encountered in clay barriers used as part of containment systems of nuclear waste. The types of processes considered include hydrolysis, complex formation, oxidation/reduction reactions, acid/base reactions, precipitation/dissolution of minerals and cation exchange. Both kinetically-controlled and equilibrium-controlled reactions have been incorporated. The total analytical concentrations (including precipitated minerals) are adopted as basic transport variables and chemical equilibrium is achieved by minimizing Gibbs Free Energy. The formulation has been incorporated in a general purpose computer code capable of performing numerical analysis of engineering problems. A validation exercise concerning a laboratory experiment involving the heating and hydration of an expansive compacted clay is described.     

<Emphasis Type="Italic">Comment on</Emphasis>¶Low temperature specific heat of blue bronze K <Emphasis Type="Bold">0.30</Emphasis>MoO <Emphasis Type="Bold">3</Emphasis>, by J. Odin,J.C. Lasjaunias,K. Biljaković, K. Hasselbach,and P. Monceau

Eur. Phys. J. B 24, 315 (2001) Here we comment on a recently published paper on the presence of a phason contribution in the low temperature heat capacity data of the charge-density-wave compounds K_0.3MoO₃ and (TaSe₄)₂I. We have shown that the anomaly in the C _P / T ³ data reported by Odin et al. is straightforwardly interpreted in terms of low energy phonon modes resulting from the peculiar topology of these compounds. Received 21 February 2002 Published online 19 July 2002     

高功率双包层光纤激光器受激拉曼散射和热效应的理论研究

 受激拉曼散射和热效应会限制光纤激光器功率的提高。利用高功率光纤激光器的速率方程和热传导方程，理论研究了双端泵浦和分布泵浦下双包层光纤激光器的受激拉曼散射和热效应，得到了光纤中的泵浦光、激光和斯托克斯光的功率分布，光纤激光器的输出特性以及光纤中的温度分布。分析表明，当泵浦功率增大到一定值时，光纤激光器中出现SRS，一部分激光功率会转移给斯托克斯光，影响激光功率进一步提高;与双端泵浦方式相比，分布泵浦下光纤激光器的斜率效率和最大输出功率相差不大，但是，光纤中的温度分布被有效地降低，因此，分布泵浦方式更为有效。     

热容模式下激光介质的动态光学畸变

 开展了热容模式下激光介质动态光学畸变研究，初步分析了温度梯度、光弹效应及介质端面变形对整个波前畸变带来的影响，并将光学畸变转化为谐振腔损耗，数值模拟了热容激光器输出功率随时间的变化规律，模拟结果表明：当激光器工作温度低于400 K时，由粒子数玻耳兹曼分布引起的功率下降可以忽略，动态热效应是实验中热容激光器输出功率随时间快速下降的原因。     

Stability of tokamak plasmas with internal transport barriers against high n ideal magnetohydrodynamic ballooning mode

A ballooning mode equation for tokamak plasma, with the toroidicity and the Shafranov shift effects included, is derived for a shift circular flux tokamak configuration. Using this equation, the stability of the plasma configuration with an internal transport barrier （ITB） against the high n （the toroidal mode number） ideal magnetohydrodynamic （MHD） ballooning mode is analysed. It is shown that both the toroidicity and the Shaftanov shift effects are stabilizing. In the ITB region, these effects give rise to a low shear stable channel between the first and the second stability regions. Out of the ITB region towards the plasma edge, the stabilizing effect of the Shaftanov shift causes the unstable zone to be significantly narrowed.     

磁场对四端量子波导中电子输运性质的影响

采用模匹配方法，研究了非均匀磁场下开放的四端量子波导中的电子输运性质. 结果表明，从一端入射的电子可以透射到两个与之垂直的输出端和一个与之平行的输出端. 在没有外加磁场的情况下，两个垂直输出端的输运概率是相同的，但垂直端与水平端的输运概率不同；在外加磁场下，由于磁边缘态效应，两个垂直输出端的输运概率也有着相当大的差别. 通过施加不同的磁场，我们能获得丰富的电子输运结构，如台阶，宽谷，尖峰等；通过调节磁场的大小和比例以及结构参数可控制该量子结构在各输出端的输运概率. 关键词： 电子输运 介观体系 磁效应     

含有五边形—七边形缺陷的单壁纳米碳管的输运性质研究

运用第一性原理的密度泛函理论结合非平衡格林函数研究了含有五边形—七边形拓扑缺陷的纳米碳管异质结的输运性质.结果发现：拓扑缺陷对碳管的输运性质有很大影响；另外，不同类型的碳管形成的异质结的输运性质也有明显的差异. 关键词： 纳米碳管 输运性质 异质结 透射系数     

Adhesion studies of latex film surfaces on the meso- and nanoscale

In this paper the effects of surface roughness and annealing temperature (T) of latex coating films on adhesion are discussed for the different stages of the film formation process. The surface free energy of latex films was assessed in terms of practical work of adhesion (W) (or adherence) using a custom-built adhesion-testing device (ATD), atomic force microscopy (AFM), and contact angle measurements. For preannealed latex films surface roughness averages (R_a) were determined from AFM height images and were related to the values of W obtained from ATD measurements at room temperature. The results obtained using these tests exhibiting surface behavior on different length scales indicate a dependence of the measured adhesion on surface roughness and temperature, as well as on the length scale of the measurements.First preannealed samples were studied, which were obtained by heat treatment above the respective glass transition temperatures (T_g). Increasing the temperature of preannealing resulted in a decrease of the adherence observed in ATD experiments at room temperature. However, on the nanoscale, using AFM, no significant variation of the adherence was observed. This observation can be explained by roughness arguments. Preannealing decreases roughness which results in lower adherence values measured by ATD while for essentially single asperity AFM experiments roughness has an insignificant effect. Specimens were also annealed over a constant period of time (90 min) at different temperatures. At the end of the heat treatment, adhesion was measured at the treatment temperature by ATD. The amplified effect of temperature observed in this case on adherence is attributed to the combination of roughness decrease and increasing test temperature. In a third set of experiments completely annealed samples were studied by ATD as well as by AFM as a function of temperature. With increasing T values ATD showed a decrease in adherence, which is attributed to a decreasing surface free energy of the annealed films at elevated T values. AFM, on the other hand, showed an opposite trend which is assigned to increasing penetration of the tip into the tip/wetting polymer samples versus increasing temperature. Finally, annealing isotherms as a function of time were investigated by ATD in situ at different temperatures. This last set of experiments allowed us to optimize annealing time and temperature to achieve complete curing.     

低温固体界面间接触导热“hysteresis”现象的研究

文中以强化低温固体界面间的接触导热为出发点 ,实验测定了低温环境下两种金属界面在过度加载前后的接触热导值 ,指出过度加载是一种经济有效的强化导热方法 ,对卸载过程接触热导率大于同次加载过程接触热导的“hysteresis”现象产生机理进行了分析     

Intra- and intermolecular trapping of cyclopentapyrazine carbenes derived from 1,2-dialkynylimidazoles

The thermolysis of 1,2-dialkynylimidazoles in benzene solution affords high yields of 7-phenyl-5H-cyclopentapyrazines, which presumably form by solvent trapping of cyclopentapyrazine carbene intermediates. In cases where dialkynylimidazole contains side chains that can participate in intramolecular carbene C-H insertion or olefin addition, these processes compete with solvent addition to afford novel tri- and tetracyclic pyrazines, which can be obtained in good yield when the thermolysis is carried out in hexafluorobenzene.