Thermal behaviour of amorphous Li2ZrO3 prepared by sol-gel technique

The results of the investigations of thermal behaviour of Li₂ZrO₃, prepared in the amorphous state by means of sol-gel technique are demonstrated. The thermal treatment was carried out in air under constant heating rate of 5 deg·min^–1 and cooling rate of 2.5 deg·min^–1. The methods of DTA, TG, Emanation Thermal Analysis (ETA) and dilatometry were used, for characterization of the thermal behaviour in dynamic conditions. The X-ray diffraction patterns were used for characterization of the phase changes observed by TA Methods.

---

Zusammenfassung Ergebnisse aus Untersuchungen des thermischen Verhaltens von Li₂ZrO₃, hergestellt mittels einer Sol-Gel-Technik im amorphen Zustand werden dargelegt. Die thermische Behandlung wurde in Luft bei einer konstanten Aufheizgeschwindigkeit von 5 Grad·min^–1 und einer Abkühlgeschwindigkeit von 2,5Grad·min^–1 durchgeführt. Zur Beschreibung des thermischen Verhaltens unter dynamischen Verhältnissen wurden DTA, TG, Emanationsthermoanalyse und Dilatometrie angewendet. Zur näheren Charakterisierung der bei TG beobachteten Phasenumwandlungen wurde Röntgendiffraktion verwendet.

     

p-CH3C6H4SR型硫醚与钯(II)配合物热分解反应动力学

热重分析(TG)和微商热重法(DTG)广泛应用于各个研究领域,用非等温热重法测定固体化合物的热分解动力学参数已有报导.许多作者提出各种不同的数据处理方法.本文用的ρ-CH_3C_6H_4SR 型硫醚对钯的萃取具有选择性好、分配比高、气味较小、易溶于脂肪烃类溶剂、易于合成、是很有发展前途的一类萃取剂.我们合成五种ρ-CH_3C_6H_4SR(R:n-C_4H_9,n-C_6H_(13),n-C_8H_(17),n-C_(10)H_(21),n-C_(12)H_(25))型硫醚与钯(Ⅱ)的配合物,用TG-DTG 法研究它们的热分解过程,用微商法(Freeman-Carroll 方程)及积分法(Coats-Redfern 方程)获得了这些配合物的热分解动力学参数.     

Thermal conductivity of the urea-hexadecane inclusion compound

The thermal conductivity and the heat capacity per unit volumec _p have been measured for the urea-hexadecane inclusion compound using the transient hot-wire method. Measurements were made under isobaric conditions at a pressure of 0.1 GPa and in the temperature range of 100–300 K. There was evidence for a phase transition at a temperature of about 160 K, in reasonable agreement with previous work. For the high-temperature phase was independent of temperature within ±1%. The low-temperature phase showed a weak temperature dependence, with (d In/d InT) _p = –0.13. It was inferred that interaction between acoustic phonons and low-frequency vibrational excitations of the guest molecules made a major contribution to the thermal resistivity. For the quantityc _p a weak maximum was observed in the region of the phase transition temperature.Dedicated to Dr D. W. Davidson in honor of his great contributions to the sciences of inclusion phenomena.     

含二苯甲烷结构四元共缩聚杂萘聚芳酰胺的合成与性能

采用自制二胺1,2-二氢-2-(4-氨基苯基)-4-[4-(4-氨基苯氧基)-苯基]-二氮杂萘-1-酮、商品二胺4,4′-二氨基二苯甲烷和对苯二胺与对苯二甲酰氯进行低温溶液缩聚反应,改变三种二胺的比例,得到了一系列共聚酰胺树脂,其特性粘数为1·24~2·32dL/g,用FT-IR、1H-NMR手段研究了聚合物的结构;利用DSC和TGA研究了聚合物的耐热性能,结果表明,该类聚合物具有较高玻璃转化温度(301℃以上);氮气气氛中5%热失重温度在438℃以上;用一定比例的二胺制得的聚合物分别能溶于N-甲基吡咯烷酮、N,N-二甲基乙酰胺等非质子极性溶剂中并浇注得到韧性薄膜.     

The reciprocal CuInS2+2CdSe⇔CuInSe2+2CdS system. Part I. The quasi-binary CuInSe2-CdSe system: Phase diagram and crystal structure of solid solutions

The type of interaction in quasi-binary system CuInSe₂ (CIS)-CdSe was investigated using differential thermal and X-ray phase analysis methods. The limits of existence of solid solutions based on low-temperature (α) and high-temperature (γ) CIS modifications and CdSe (β) with chalcopyrite, sphalerite and wurtzite structures, respectively, were established in sub-solidus region at 620 K and 870 K. For certain compositions of solid solutions, the structure was refined using powder X-ray diffraction. A phase diagram of the CIS-CdSe system was constructed. A peritectic process L+β⇔γ takes place in the system at 1260 K.     

Concerning the Thermal Diastereomerization of the Green Fluorescent Protein Chromophore

Summary. Two model compounds for the green fluorescent protein chromophore were prepared. One of them incorporates the natural 4-hydroxybenzylidene group of the natural tyrosin derived chromophore, the other one bears a methyl group instead of the hydroxy group. Whereas the photochemically prepared (E)-diastereomer of the first compound very effectively reverted thermally (room temperature) to the thermodynamically stable (Z)-diastereomer, the (E)-diastereomer of the second derivative proved to be stable even at elevated temperatures for more than a day. This finding can be rationalized by constructing the appropriate resonance structures showing that only in the first case an effective delocalization enables partial single bond character of the benzylidene double bond. From the standpoint of chemical etiology, only Nature’s choice of the tyrosin derived chromophore of the green fluorescent protein provides an efficient radiationless thermal relaxation channel for the unwanted photo-diastereomerization product formed after excitation besides the dominating fluorescence channel of its chromophore.     

A two-dimensional infrared correlation spectroscopic study on the thermal degradation of poly(2-hydroxyethyl acrylate)-co-methyl methacrylate/SiO2 nanohybrids

Two-dimensional infrared (2D IR) correlation spectroscopy was applied to study the structural changes occurring in the decomposition of PHEA-co-MMA/SiO₂. Complicated absorption spectral changes were observed in the heating process. 2D IR analysis indicates that during heating, covalent bonds, (Si-O-C), between the polymer and the inorganic moiety were formed, which was the main factor in the improvement in thermal properties of the hybrids such as the decomposition temperatures (T_d). The thermal stability of the hybrids was also studied by solid-state ²⁹Si MAS NMR spectroscopy and TGA tests. Their results complemented each other well.     

含有羧基配体的蝎型钒氧配合物的合成、结构及其热分解动力学

设计合成了两种新型的以聚吡唑硼酸盐、氨基酸为配体的钒氧配合物VO[phCH2CH(NH2)COO][HB(pz)3](1)和VO(3,5-Me2pz)[HB(3,5-Me2pz)3](CH3COO)(2). 通过元素分析、红外光谱对配合物进行了表征, 并利用单晶X射线衍射技术解析了它们的结构. 非等温热分解动力学研究表明, 配合物1和2的热分解反应都是分两步进行的. 通过计算, 配合物1热分解的第一步反应的可能机理为成核与生长(n=1/4); 第二步反应的可能机理为化学反应. 其非等温动力学方程分别为, dα/dT=(A/β)e-E/RT(1/4)(1-α)[-ln(1-α)]-3 和dα/dT=(A/β)e-E/RT(1-α)2. 分解反应的表观活化能分别是223.52 和331.94 kJ·mol-1; 指前因子ln(A/s-1)分别是49.67 和57.50. 配合物2 热分解的第一步反应的可能机理为化学反应; 第二步反应的可能机理为成核与生长(n=1/2). 其非等温动力学方程分别为, dα/dT=(A/β)e-E/RT(1-α)2, 和dα/dT=(A/β)e-E/RT(1/2)(1-α)[-ln(1-α)]-1. 分解反应的表观活化能分别是300.56 和444.72 kJ·mol-1; 指前因子ln(A/s-1)分别是75.53 和92.50.     

羟基锆及锆铝交联粘土的合成与表征

制备了锆交联粘土和锆铝交联粘土。锆交联粘土制备条件的研究表明，直接用ＺｒＯＣｌ２．８Ｈ２Ｏ水溶液作交联剂，延长老化时间和增大交联剂浓度有利于制备大比表面积高温有序的锆交联粘土。     

增容剂对聚丙烯/粘土纳米复合材料热分解动力学的影响

采用三单体固相接枝聚丙烯作为增容剂制备了聚丙烯粘土纳米复合材料.通过XRD和TEM表征了其纳米结构.利用动态TGA方法研究了聚丙烯和纳米复合材料的热稳定性.分别采用Flynn Wall Ozawa和Kissinger法研究了聚丙烯及其纳米复合材料的热分解动力学.结果都表明,蒙脱土的加入明显提高了聚丙烯的起始热分解温度,纳米复合材料热失重10%时的温度比聚丙烯提高40K左右;纳米复合材料的热分解温度区间明显比聚丙烯的窄;纳米复合材料热分解表观活化能明显增大,与聚丙烯相比提高50%以上.