High Temperature Corrosion Resistance of Coatings Deposited by Hvof for Application in Steam Turbines

The geothermal steam turbines are exposed to mechanisms of corrosion/erosion that weakens its components and reduces their useful life. Due to this problem work has been done in application and characterization of coating in solid state by means of the technique of high-velocity Oxygen Fuel (HVOF), evaluating the corrosion rate (V_corr) at high temperature of MCrAlY and Diamalloy 4006 coatings deposited on stainless steel SS304. Test was performance in an Autoclave at 170 ⁰C using a modified geothermal fluid as electrolyte. Open circuit potential was monitoring during 24 hours until the system reached the equilibrium. After that, Polarization and Impedance Spectroscopy techniques were used to evaluate the specimens. For microstructure characterization; X–ray Diffraction (XRD), electron sweep microscope (SEM) and Optical microscope were applied. Results show that both coatings (Diamalloy 4006 and MCrAlY), have low current density compare with the substrate, which is an indicative of a lower corrosion rate due to the passive behavior of the species deposited on the Surface of the coating.     

15N/14N Isotopic Exchange in the Dissociative Adsorption of N2 on Tantalum Nitride Cluster Anions Ta3N3-

Adsorption and activation of dinitrogen (N₂) is an indispensable process in nitrogen fixation. Metal nitride species continue to attract attention as a promising catalyst for ammonia synthesis. However, the detailed mechanisms at a molecular level between reactive nitride species and N₂ remain unclear at elevated temperature, which is important to understand the temperature effect and narrow the gap between the gas phase system and condensed phase system. Herein, the ¹⁴N/¹⁵N isotopic exchange in the reaction between tantalum nitride cluster anions Ta₃¹⁴N₃^- and ¹⁵N₂ leading to the regeneration of ¹⁴N₂/¹⁴N¹⁵N was observed at elevated temperature (393-593 K) using mass spectrometry. With the aid of theoretical calculations, the exchange mechanism and the effect of temperature to promote the dissociation of N₂ on Ta3N3? were elucidated. A comparison experiment for Ta₃¹⁴N₄^-/¹⁵N₂ couple indicated that only desorption of ¹⁵N₂ from Ta₃¹⁴N₄¹⁵N₂^- took place at elevated temperature. The different exchange behavior can be well understood by the fact that nitrogen vacancy is a requisite for the dinitrogen activation over metal nitride species. This study may shed light on understanding the role of nitrogen vacancy in nitride species for ammonia synthesis and provide clues in designing effective catalysts for nitrogen fixation.     

Immobilization of Eversa® Transform via CLEA Technology Converts It in a Suitable Biocatalyst for Biolubricant Production Using Waste Cooking Oil

The performance of the previously optimized magnetic cross-linked enzyme aggregate of Eversa (Eversa-mCLEA) in the enzymatic synthesis of biolubricants by transesterification of waste cooking oil (WCO) with different alcohols has been evaluated. Eversa-mCLEA showed good activities using these alcohols, reaching a transesterification activity with isoamyl alcohol around 10-fold higher than with methanol. Yields of isoamyl fatty acid ester synthesis were similar using WCO or refined oil, confirming that this biocatalyst could be utilized to transform this residue into a valuable product. The effects of WCO/isoamyl alcohol molar ratio and enzyme load on the synthesis of biolubricant were also investigated. A maximum yield of around 90 wt.% was reached after 72 h of reaction using an enzyme load of 12 esterification units/g oil and a WCO/alcohol molar ratio of 1:6 in a solvent-free system. At the same conditions, the liquid Eversa yielded a maximum ester yield of only 34%. This study demonstrated the great changes in the enzyme properties that can be derived from a proper immobilization system. Moreover, it also shows the potential of WCO as a feedstock for the production of isoamyl fatty acid esters, which are potential candidates as biolubricants.     

Fabrication of bacterial cellulose thin films self-assembled from sonochemically prepared nanofibrils and its characterization

Bacterial cellulose (BC) film formation could be a critical issue in nanotechnology applications such as biomedical or smart materials products. In this research, purified pretreated BC was subjected to high intensity ultrasound (HIUS) and was investigated for the development of BC films. The morphological, structural and thermal properties of the obtained films were studied by using FE-SEM, AFM, FT-IR, XRD, TGA and DSC characterizations. Results showed that the most favorable purification treatment was the 0.01 M NaOH at 70 °C for 2 h under continuous stirring. The most suitable ultrasound operating conditions were found to be, 1 cm distance of ultrasonic probe from the bottom of the beaker, submerged in cold water bath cooling around 12 ± 2 °C. The power (25 W/cm²), time (30 min), BC concentration (0.1% w/w), amplitude (20 μm) and frequency (20 kHz) were maintained constant.     

Reflection error correction of gas turbine blade temperature

Accurate measurement of gas turbine blades’ temperature is one of the greatest challenges encountered in gas turbine temperature measurements. Within an enclosed gas turbine environment with surfaces of varying temperature and low emissivities, a new challenge is introduced into the use of radiation thermometers due to the problem of reflection error. A method for correcting this error has been proposed and demonstrated in this work through computer simulation and experiment. The method assumed that emissivities of all surfaces exchanging thermal radiation are known. Simulations were carried out considering targets with low and high emissivities of 0.3 and 0.8 respectively while experimental measurements were carried out on blades with emissivity of 0.76. Simulated results showed possibility of achieving error less than 1% while experimental result corrected the error to 1.1%. It was thus concluded that the method is appropriate for correcting reflection error commonly encountered in temperature measurement of gas turbine blades.     

Research on application of polynomial fitting technique in rotary kiln infrared temperature measurement system

Aiming at the linear temperature compensation algorithm’s disadvantage of temperature measurement error in rotary kiln infrared scanning temperature measurement process, this paper proposes a precise nonlinear cubic polynomial fitting temperature compensation algorithm. The proposed algorithm compensates the temperature values of scanning points on rotary kiln surface by following steps: Calculating temperature difference between the real temperature value of rotary kiln and temperature value measured by infrared scanning temperature measurement system; Fitting the temperature difference data with cubic polynomial; Using the obtained function to compensate temperature. Experimental result shows that compared with the usual linear temperature compensation algorithm, the accuracy of proposed algorithm has raised about 2.25 times when cubic polynomial is used.     

“神龙一号”加速器束流输运系统研制

文章系统介绍了“神龙一号”直线感应加速器束流输运系统的研制过程和取得的成果, 重点阐述了螺线管线圈、二极校正线圈、多功能腔等关键单元部件的设计、传输元件的磁轴测量和准直安装、束线的总体布局、束流调试等研究内容. 束流调试结果表明, 该束流传输线的设计是成功的, 并且具有较宽的动态适应范围. 最后, 结合束流调试的经验, 提出了一些建议供以后工作参考.     

Mesoionic Carbene Cobalt Complexes as Multipurpose Catalyst Precursors for Hydrosilylation and Dihydropyrimidinone Synthesis

Metalation of CH₂OH-substituted triazolium salts with CoCl₂ under basic conditions affords C,O-bidentate chelating carbene Co(III) complexes ( 3a , 3b ), while analogous phenyl-substituted triazolium salts produce monodentate carbene Co(II) complexes ( 3c , 3d ). The distinct substituent-induced properties of the metal centers were demonstrated by electrochemical measurements and catalytic activities in two specific processes. The complexes showed appreciable activity in the reduction of C=O bonds through hydrosilylation, with methoxybenzene-functionalized triazolylidene Co(III) complex 3a achieving a high selectivity towards aldehydes vs. ketones with turnover frequencies (TOFs) up to 200 h⁻¹. The C,O-chelate systems were also active catalysts in the Biginelli process, a one-step three-component reaction for efficient dihydropyrimidinone synthesis. Optimization of reaction conditions provides high activity with complex 3a , reaching TOFs of 800 h⁻¹, the highest activity known for cobalt NHC complexes to date.     

ZIF-8衍生的具有可控氧空位的ZnO对光催化去除NO的增强及毒性NO2形成的抑制

氧化锌作为一种半导体材料,具有合适的能带结构位置,高催化效率,低成本和环境可持续性,因而广泛用于光催化领域.然而,由于氧化锌的宽带隙,可见光吸收能力差以及光生电子-空穴对的快速复合,极大地影响了其光催化效率.通过引入氧空位调控光催化剂的结构被证明是一种可以改善光生载流子的分离,从而提高光催化性能的有效方法.本文以ZIF-8为前驱体,采用两步煅烧法合成了具有不同浓度氧空位分布的ZnO纳米光催化剂,通过X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、X射线光电子能谱(XPS)、电子顺磁共振(EPR)、荧光光谱仪(PL)等手段系统地分析了合成的光催化剂的理化性质,并评价了它们在可见光下光催化氧化去除NO反应性能.EPR结果表明,样品中氧空位的浓度取决于温度处理的过程.通过两步煅烧法得到氧化锌中氧空位的含量高于一步直接煅烧法所得的样品.此外,随着煅烧温度升高,合成的氧化锌晶格越完好,其氧空位含量越少.UV-Vis DRS结果表明,两步煅烧法合成的ZnO与商业的ZnO及一步法直接煅烧合成的ZnO相比,其吸光范围从紫外光拓展到了可见光,表现出了更加优异的吸光性能.光催化反应结果表明,与商业氧化锌和一步直接煅烧法所得样品相比,两步煅烧法合成的样品表现出了更优异的光催化去除NO性能,并抑制了中间产物毒性NO2的产生,促进了NO的深度氧化.具体反应路径为:在光照过程中,光生电子很容易被氧空位俘获,与O2反应产生更多的超氧自由基(·O2^-),从而将NO氧化成最终的产物硝酸盐.尤其有趣的是,先在350 ℃煅烧2小时再400℃煅烧1小时的两步法样品Z 350-400的NO去除效率分别比一步法样品Z 400(400℃煅烧)和商用ZnO高出1.5和4.6倍.这表明以MOF材料衍生的具有适当量氧空位的金属氧化物为一种高效去除NO的光催化剂具有很好的应用前景.