Relative Intensity Noise in Optical Single Side Band Systems with Multiple In-Line Amplifiers: Analysis and Validation

This article analyzes and validates through simulation the influence of fiber nonlinearity, dispersion, and loss on the Relative Noise Intensity (RIN) spectrum at fiber output in externally modulated optical single side band (OSSB) systems. The analysis includes the RIN generated by the laser source, the effect of the OSSB modulator, and noise generated by the in-line optical amplifiers. The analysis takes into account conversion between phase noise and intensity noise introduced by fiber transmission. It is shown that, depending on the operating conditions, the system performance may be predominantly affected either by the laser RIN or by the noise generated by the in-line optical amplifiers. The impact of the OSSB modulator can be relevant when the RIN of the system is dominated by the laser noise and should therefore be considered.     

An Overview of Mechanical Strength of Optical Fiber Fusion Splices: Examples of Fractographic Analysis of Break Causes

The theory and phenomena of mechanical strength of fusion splices are reviewed. An emphasis is placed on fractographic analysis of break causes. A variety of useful examples of splice breaks resulting from surface mechanical damage, various types of contamination, re-deposition of silica particles/thermal shock, and devitrification are shown. Special strength reduction issues related to emerging new splice types and splicing techniques, such as arc fusion splicing of heat sensitive fibers, prolonged pre- and post-heat treatment (for reducing splice losses of dissimilar fiber splices), and fire polishing, are discussed.     

磁场中双折射光纤的琼斯矩阵等效模型

采用延迟器与旋光器的串联模型, 研究磁场中双折射光纤的偏振传输特性, 将它们的琼斯矩阵按照两种不同的顺序级联相乘, 导出了两种等效模型中等效相位延迟量、等效快轴方向和等效旋光角的解析表达式。研究发现, 当光纤同时具有线双折射和圆双折射时, 单位长度的等效相位延迟量并不等于其固有的线双折射, 等效旋光角也不等于其法拉第旋转角, 它们同时都与光纤的固有线双折射和磁场引起的圆双折射相关联。且在不同级联顺序的两种等效模型中, 等效相位延迟器的快轴方向都不与光纤的双折射主轴重合, 而是分别向两个相反的方向偏移一定的角度, 偏移角为等效旋光角的一半。     

静动结合的化学腐蚀法制备近场光学探针的理论分析

理论上分析了静动结合的化学腐蚀法制备探针的具体机理及过程。在静态腐蚀的过程中, 利用流体力学Young-Laplace方程的一级近似解获得了光纤插入到HF酸中形成的新月形高度。在动态腐蚀过程中, 详细分析了当静态腐蚀时间和动态腐蚀时间分别取不同值时, 光纤移动速度对光纤探针结构的影响。利用此法可制备出尖端锐利、大锥角或多锥体等各种结构的光纤探针。这为实验上制备出性能优良的探针, 为拓宽扫描近场光学显微镜的应用范围奠定基础。将上述理论分析的结果与本文实验中所得初步结果进行了比较, 所得结果一致。     

Research of the planar optical fiber Bragg grating hydrophone probe

This paper presents the planar Fiber Bragg Grating （FBG） hydrophone probe sensing principle, and theoretically and experimentally researches the probe structure sensitivity, the receiving sensitivity frequency response characteristic and the acceleration response property. Planar sheet is made of stainless steel, its thickness is 0.15 mm, its diameter is 15mm, and the length of hollow circular shell is 20 mm. For this size of the structure, the probe structure sensitivity is up to 23 fm/Pa, which is about 7300 times of the value of the bare fiber. The resonance frequency is 6.5 kHz, and the amplitude-frequency curve of the receiving sensitivity response is relatively flat within the frequency range of 100 Hz to 5.5 kHz. The output yielded by one unit acceleration （1m/s2） is equivalent to （2.52 to 3.26 Pa） acoustic pressure acting output. This probe structure is easy to form FBG hydrophone array by multiplexing technique. The research shows that this planar structure not only can form FBG hydrophone probe, but also can constitute optical FBG laser hydrophone probe. The structure can realize different bandwidth, different range acoustic pressure measurement by adjusting the geometrical size of the sheet.     

光纤型宽带可调连续波差频产生中红外激光器转换效率的研究

以掺镱光纤激光器为抽运源、掺铒光纤激光器后接掺铒光纤放大器为信号源,利用周期极化掺镁铌酸锂晶体,研究了全光纤化差频产生中红外激光器的转换效率特性。结果表明,抽运光和信号光偏振态影响差频产生过程的转换效率,利用偏振控制器,可将抽运光和信号光偏振方向调节到与晶体光轴方向平行,以获得高的转换效率。抽运光和信号光的光束质量既影响差频产生过程的转换效率,又决定晶体纵向位置的容限,当聚焦系统由自聚焦透镜和焦距100mm平凸透镜组成时,相对转换效率达0.717mW-2,晶体纵向位置容限为44mm。此外,差频光在3126.36~3529.6nm范围内调谐时,转换效率基本保持不变。     

提高布里渊光时域反射应变仪测量空间分辨力的等效脉冲光拟合法

由于探测光脉冲宽度受到限制,布里渊光时域反射仪(BOTDR)在对光纤上的应变进行分布式测量时,空间分辨力只能达到1 m。针对布里渊光时域反射仪单次采样接收背向布里渊散射信号(BBS)需要一定的时间,提出了基于等效脉冲光的多洛仑兹拟合法以提高其应变测量的空间分辨力。该方法将探测光脉冲在布里渊光时域反射仪完成单次采样所需的时间上进行积分,将积分函数作为等效脉冲光的表达式,再根据等效脉冲光的形状将布里渊光时域反射仪接收到的背向布里渊散射谱(BBS)细分,并对它进行多洛仑兹迭代拟合,准确求得每个细分布里渊散射谱的中心频率,进而利用光纤中布里渊频移与应变的对应关系,得到光纤中与细分布里渊散射谱对应的细分光纤单元上的应变情况。实验结果表明,利用这种方法,可使布里渊光时域反射仪应变测量的空间分辨力提高至0.05 m。     

用157 nm激光制作的光子晶体光纤法布里-珀罗传感器

157nm准分子激光用于微加工具有单光子能量高,峰值功率高,材料吸收系数高,分辨率高等优点。利用157nm激光微加工的方法,在光子晶体光纤上融切出微小矩形孔,从而构成腔长为45.6μm的微光纤法布里-珀罗干涉腔,得到的干涉条纹平滑,衬比度约为26dB,并从激光与石英材料的相互作用上分析了形成较好干涉条纹的原因。把这种微腔应用于应变测量,在550μm范围内,腔长增量相对于应变的灵敏度为0.32nm/μm,线形度达0.9994。实验证明该微腔对温度不敏感,800℃范围内腔长变化仅20nm。157nm准分子激光加工光纤法布里-珀罗腔方法简单,一次成型,具有较高的加工效率和精度,有望实现光纤法布里-珀罗腔的规模化批量制造,具有较好的应用前景。     

基于非线性偏振旋转效应的多波长光纤激光器

多波长光纤激光器是未来波分复用光通信系统的理想光源,提出和展示了一个基于非线性偏振旋转效应的多波长光纤激光器,非线性偏振旋转诱导的强度相关非均匀损耗能有效地抑制均匀加宽增益介质掺铒光纤中的模式竞争,从而使光纤激光器在室温下产生稳定的多波长输出,实验实现了最多18个波长的多波长输出.另外,此激光器没有使用传统的滤波器,而是在激光腔内插入一段保偏光纤,保偏光纤与偏振相关隔离器构成一等效Lyot双折射光纤周期性滤波器.利用这种在线型的双折射光纤滤波器简化了光纤激光器的结构,使它更易于集成.还实验研究了多波长输出随抽运功率的演化,发现抽运功率对多波长的均匀性影响很大.     

一种具有声低通滤波特性的无源零差光纤水听器

报道了一种新颖的具有抗混叠功能的无源零差迈克耳孙型光纤水听器.它由一个普通的芯轴型光纤水听器和一个圆柱型亥姆霍兹共振器构成.在驻波罐中对其声压相位灵敏度频响进行了测量,结果表明该光纤水听器具有较好的声低通滤波特性,能有效地抑制声信号中的高频成分,从而实现抗混叠滤波.该光纤水听器的低频声压相位灵敏度主要由传感光纤长度和弹性增敏层的物理特性决定,约为-159 dB(0 dB=1 rad/μPa).在1150 Hz附近出现了一个共振峰,这主要由圆柱型亥姆霍兹共振器的声学特性决定.1150～2280 Hz频段内的灵敏度衰减率约为50 dB/倍频程,1500 Hz以后的灵敏度衰减量大于10 dB.这对于提高我国未来声纳系统的抗干扰能力具有十分重要的意义.