XPS和AES研究A3钢表面杂多酸钝化膜

通过比较多种杂多酸及铬酸盐等纯化剂的钝化效果，发现Ｈ３ＰＭｏ１２Ｏ４０是一种优良的纯化剂。在５５℃，ｐＨ１．０的条件下，Ａ３钢在２０ｇ／Ｌ的Ｈ３ＰＭｏ１２Ｏ４０溶液中能形成致密的耐蚀性保护膜。ＡＥＳ结合Ａｒ＾＋溅射测得膜的元素组成为：Ｐ１．９％，Ｍｏ１７．９％，Ｏ６９．６％，Ｆｅ１０．７％．ＸＰＳ测得膜中Ｍｏ以Ｍｏ（Ⅵ）、Ｍｏ（Ｖ）ｔ Ｍｏ（Ⅳ）三种氧化态存在。红外及Ｒａｍａｎ光谱表明，膜的主要振     

不锈钢薄板和薄带的直读光谱分析

利用直读光谱仪，优化各种分析参数，快速分析不锈钢薄板或薄带的化学成分，其精密度和准确度较好。     

EDTA滴定法测定钢渣中游离氧化镁

以碘-乙醇溶液为催化剂,选择乙二醇作溶剂浸取钢渣中游离氧化镁,采用EDTA滴定法测定其中游离氧化镁的含量。试验中考察了碘-乙醇的最佳用量和K-B混合指示剂的最合适配比。结果表明:催化剂碘-乙醇溶液的添加量达碘与氧化镁的质量比为7.5比1,指示剂中酸性铬蓝K和萘酚绿B的比值为1比1.4时,滴定终点变色明显,滴定结果准确。在钢渣中加入纯氧化镁测定的平均回收率为96.5%,相对标准偏差(n=5)为1.3%。     

Modelling and numerical simulation of high strength fibre reinforced concrete corbels

In the present study, new constitutive models for high strength steel fibre reinforced concrete (HSSFRC) have been formulated by means of a regression analysis of many experimental data (from literature) by using SPSS-statistical program. This proposed constitutive models have been employed for formulating the material finite element models to study the behaviour of HSSFRC corbels.     

Application of a heuristic search technique for the improvement of spray zones cooling conditions in continuously cast steel billets

The process of casting occupies an important place in the metallurgical industry, and the entire world of the metal user. In the past, the ingot casting–rolling (slabbing, blooming, or billeting) process was commonly used. The continuous casting process has largely replaced this earlier method because of the inherent advantages of energy savings, enhanced productivity, higher yield and reduced costs. However, continuous casting process is not without of its problems. Considerable effort has been made by many researches to establish adequate design, operation and maintenance of continuous casting machine to ensure metallurgical quality of the final product. One of the most severe defects in continuous casting products is concerned with the cracks provoked by improper design of the spray cooling system. The aim of this work is to develop a two dimensional heat transfer model based on the finite difference method in order to calculate the strand temperatures and the solid shell profile along the machine. An Artificial Intelligence heuristic search procedure interacts with the numerical model to determine the improved cooling conditions for the sprays zones of a real continuous caster for the production of quality billets.     

Relationship between paddy soil adhesion to steel and to rubber

Forty-three pairs of samples concerning adhesion of paddy soil to steel and to rubber are used to identify the relationship between these two groups of variables. Results show that there is no significant difference between them, implying that they are roughly equal to each other in engineering practice.     

Polypyrrole coating doped by molybdo-phosphate anions for corrosion prevention of carbon steels

The polypyrrole coating was prepared from phosphoric acid aqueous solution containing the hetero-polyanion and pyrrole monomer to make new coating for corrosion prevention of carbon steels. The coating thus formed in the phosphate acid solution was doped by and by . The coating was flexible enough to cover the steel homogeneously without cracks, although many cracks were observed on the coating formed in a neutral aqueous solution of Na₂MoO₂. The 5.1-μm-thick polypyrrole coating makes the steel maintain the passive state for 48 h in neutral 3.5 wt% NaCl solution at pH 5.3 and for 80 h in acidic 3.5 wt% NaCl solution at pH 1.9. The coating decreased the corrosion rate of the steel by 1/200 in the neutral NaCl solution and by 1/340 in the acidic NaCl solution, if compared with the rate of the bare steel. The dissolution current of the steel during the immersion remained at the level of the typical passive current in the respective solutions.     

Influence of external magnetic field on the etching of a steel ball in an aqueous solution of nitric acid

The effect of change of shape of a steel ball was revealed as a result of its etching in an aqueous solution of nitric acid under influence of an external magnetic field. The elongation of a ferromagnetic ball was observed along the direction of an external magnetic field while etching took place uniformly in all the directions without magnetic field application. The steel ball etching in a magnetic field is characterized by formation of three cylindrically symmetric regions with different etching rates and surface structures, divided from each other by clear borders (namely, the pole, equator and transition regions are formed). The non-monotone dependences of etching rate, surface structure of a sample and sample shape after etching on an external magnetic field are observed.     

The role of nitrogen in the preferential chromium segregation on the ferritic stainless steel (1 1 1) surface

The temperature dependence on the segregation behavior of the ferritic stainless steel single crystal (1 1 1) surface morphology has been examined by scanning tunneling microscopy (STM), Auger electron spectroscopy (AES), and low energy electron diffraction (LEED). AES clearly showed the surface segregations of chromium and nitrogen upon annealing. Nanoscale triangular chromium nitride clusters were formed around 650 °C and were regularly aligned in a hexagonal configuration. In contrast, for the ferritic stainless steel (1 1 1) surface with low-nitrogen content, chromium and carbon were found to segregate on the surface upon annealing and Auger spectra of carbon displayed the characteristic carbide peak. For the low-nitrogen surface, LEED identified a facetted surface with (2 × 2) superstructure at 650 °C. High-resolution STM identified a chromium carbide film with segregated carbon atoms randomly located on the surface. The facetted (2 × 2) superstructure changed into a (3 × 3) superstructure with no faceting upon annealing at 750 °C. Also, segregated sulfur seems to contribute to the reconstruction or interfacial relaxation between the ferritic stainless steel (1 1 1) substrate and chromium carbide film.     

烧结烟气脱硫脱硝用活性炭混合钢渣复合材料的光谱学分析

钢渣是冶金工业中产生的主要固体废弃物,其产量约为每年粗钢产量的15%~20%。由于技术的局限,导致我国钢渣利用率较低,仅为年钢渣产量的10%,同时加之管理制度的不健全,导致钢渣大量露天堆放,对土地资源、地下水源,以及空气质量形成严重影响。固体废弃物再利用是资源可持续发展的重要途径之一,钢渣的主要化学成分为CaO, SiO2, Al2O3, MgO, Fe2O3, MnO, f-CaO等。面对上述问题,利用冶金固体废弃物与活性炭开发一种价格低廉且性能优越的活性炭混合钢渣复合材料,既是冶金固体废弃物的高附加值利用与资源可持续发展的重要途径之一,也是大幅降低改性活性炭生产成本与提高经济效益的重要途径之一。该研究创新性以活性炭与钢渣为研究对象,利用钢渣中含有的金属氧化物对活性炭进行改性处理制备用于烧结烟气脱硫脱硝的活性炭混合钢渣复合材料,通过搭建实验反应装置对活性炭混合钢渣复合材料的脱硫脱硝性能进行测试。利用X射线荧光光谱仪(XRF)对钢渣的化学成分进行测试与分析,比表面积及孔径测定仪(BET)对活性炭混合钢渣复合材料的孔结构进行测试与分析,傅里叶变换红外光谱仪(FTIR)对钢渣的结构组成进行测试与分析,扫描电子显微镜(SEM)对活性炭混合钢渣复合材料的微观结构进行测试与分析,以揭示活性炭与钢渣制备活性炭混合钢渣复合材料的机理,以及活性炭混合钢渣复合材料对烧结烟气脱硫脱硝的机理。结果表明:当钢渣为电炉热泼渣、钢渣与活性炭质量比为2∶4、钢渣与活性炭细度为400目时,活性炭混合钢渣复合材料具有良好的脱硫脱硝性能与合理的经济性,即脱硫效率为100%、脱硝效率为58%。活性炭混合钢渣复合材料具有的多孔结构对SO2和NO进行有作用,钢渣中Fe2O3与MnO2促使活性炭官能团进行催化还原反应提高脱硫脱硝性能,其中吸附作用是主导与前提,催化还原反应是辅助与协同。以期为高附加值的钢渣利用提供新途径,实现钢铁企业以废治废、以废增效的目的。