介孔分子筛MCM-41表面的有机胺功能化及其应用

采用γ-胺丙基三甲氧基硅烷与表面硅羟基的反应,对介孔分子筛MCM-41进行了有机胺功能化.并对其进行了表征.XRD、比表面积测定、元素分析、TG、FT-IR和TEM的测定结果均表明,MCM-41表面成功地接枝上了有机胺功能基团而六方结构特征基本保持.在有机胺功能化的MCM-41上固载Ru基催化剂,并将其用于CO2加H2合成HCOOH反应,所显示的活性优于相应的均相催化剂,并且该催化剂具有较好的回收再用性能.     

SAPO—11分子筛用i—Pr2NH导向合成及其酸性研究

以ＡｌＰＯ４、Ｈ３ＰＯ４、ＳｉＯ２等为原料采用单一模板剂ｉＰｒ２ＮＨ合成了ＳＡＰＯ１１分子筛，利用Ａｖｒａｍｉ方程等对合成过程进行了定量描述。还利用红外（ＩＲ）、程序升温脱附（ＴＰＤ）、线性丁烯骨架异构反应催化活性测试等手段表征了ＳＡＰＯ１１的酸性。结果表明，合成过程随温度有明显变化，晶化阶段的活化能远高于核化阶段的值。可用Ａｖｒａｍｉ方程的参数来表征合成过程的难易程度。分子筛中存在Ｂ酸和Ｌ酸位，主要在中等强度范围，从而对线性丁烯骨架异构反应有较好的催化活性。提高分子筛中硅含量可明显增大酸位浓度，酸强度也有轻度增强。     

A novel hyperbranched polyester acrylate used for microfabrications

A novel hyperbranched polyester acrylate (HPEA) was synthesized based upon ethylenediamine tetraacetic acid as a “core” molecule, 5‐hydroxyisophthalic acid as an AB₂ monomer, and 2‐hydroxyethyl acrylate as an endcapping reagent. The obtained oligomer has an unsaturation concentration of 4.10 mmol_C?C g^?1 measured by nuclear magnetic resonance and a wide molecular weight distribution of 1.64 measured by gel permeation chromatography. The two‐photon absorption (TPA) photopolymerization of HPEA under the exposure of a Ti : sapphire femtosecond laser with a wavelength of 800 nm was investigated through laser exposure dose‐dependant spatial resolutions of its resins. The TPA photopolymerization thresholds at the range 1.6–4.3 × 10⁷ mJ cm^?2, and exposure dose windows at the range 3.4–4.3 for three formulations were determined. A spatial resolution of 0.85 μm was obtained through the TPA photopolymerization of the formulation containing 1 wt% photoinitiator and 0.3 wt% photoinhibitor. A diffraction grating and real three‐dimensional coupled gear wheel created by TPA photopolymerization were described to demonstrate the unique capability of HPEA in microfabrications. Copyright © 2004 John Wiley & Sons, Ltd.     

新型介孔分子筛KIT-1加氢脱硫催化剂的研究

制备了新型的结构排列无序的介孔分子筛KIT-1和负载Ni, Mo的KIT-1加氢脱硫催化剂。实验结果表明MoO3较易分散在KIT-1的表面,而NiO则容易在其表面形成小晶粒。与以MCM-41和NaY分子筛为载体的Ni, Mo催化剂相比, KIT-1负载催化剂具有较高的加氢脱硫催化活性,因为KIT-1载体具有相互交错的三维孔道结构, 有利于反应物和产物的扩散, 而不容易受孔道堵塞的影响。     

ICP-AES内标法测定分子筛的组成

首次通过ICP-AES仪研究了分子筛化学组成全分析的方法，采用HNO3-HF混合酸密闭溶样，用H3BO3配合F^-，分别采用内标法和基体消除法消除基体效应．将研究结果与经典方法比较表明：采用本文研究的分析方法，结果准确可靠，符合分析要求，尤其对杂原子分子筛以及金属氧化物修饰的分子筛的组成分析具有应用价值．     

KIT-1介孔分子筛的化学修饰及吸附性能

介孔分子筛MCM-41具有较大、可调的孔径和较高的比表面积，其骨架组成具有较强的可调变性．为该材料的应用提供了很大的空间。但全硅MCM-41分子筛在潮湿空气中，即使在室温条件下也会发生水解反应，使其介孔结构遭到破坏。前人已针对MCM-41分子筛稳定性不足的问题相继合成了稳定性较高的介孔分子筛KIT-1,     

芯片毛细管电泳荧光检测器灵敏度的研究

本文采用倒置荧光显微镜,以汞灯为激发光源,自行设计组装了芯片毛细管电泳荧光检测系统。以荧光素异硫氰酸酯(FITC)为检测对象,对双通道门控光子计数器、CH151型光子计数探测器、电荷耦合器件(CCD)三种荧光检测器的灵敏度进行了比较研究。根据芯片毛细管电泳图谱分析,FITC在双通道门控光子计数器、CH151型光子计数探测器、CCD三种检测器中的检出限(S/N=3)分别为7.0×10-10mol/L,1.2×10-9mol/L,3.2×10-8mol/L。进一步采用CH151型光子计数探测器和CCD两种较常用检测器,对FITC和荧光素、曙红和荧光素两组荧光试剂的分离及检测进行了研究。结果表明,使用CH151型光子计数探测器作为检测器,灵敏度高,基线稳定,信噪比高。     

Some Comments on the Matter Wave-light Wave Hypothesis

From the de Broglie matter wave hypothesis and Planck’s energy quantization law, and assuming conservation of energy in the absorption of a photon and its consequent conversion to kinetic energy of motion by a material particle initially at rest, one can deduce a simple mathematical relationship between the wavelength λ (or frequency ν), of the photon absorbed by the particle at rest, and the resulting de Broglie matter wave length, λ_D, of the particle with kinetic energy of motion of mv²/2. The relationship so deduced, λ_D∝√λ, suggests that visible wavelengths of light, from about 4000 ?, in the violet, to beyond about 7000 ?, in the red, on absorption by an electron at rest, lead to material electron wavelengths, λ_D, of the order of the size of the electron transfer proteins seen in the photosynthetic reaction centers of photosynthesizing organisms, at about a size of 50–100 ?. In addition to understanding the mechanism of photosynthesis as a material wave mediated phenomenon, further areas of importance of the relations pointed out in this paper are in the design of experiments to gain a deeper understanding of the basic tenets of wave mechanics, and in the use of tunable lasers to probe various properties of material waves, and to precisely control their properties for applications including lithography.     

卟啉酞菁模型化合物光致电子转移研究

本文采用时间相关单光子计数对卟啉酞菁ＴＴＰ－（ＣＨ２）ｎ－Ｐｃ模型化合物的光致电子转移进行了研究，发现激发Ｐｃ时，呈现单指数衰减，ｎ＝４时电子转移速率减小，活化能，重排能增加，电子转移效率下降，电子转移反应△ＧＣＳ与电荷分离活化络合物衰变速率ＫＣＴ，按以下规律：△Ｇ＾（５）ＣＳ〉△＾（３）ＣＳ〉△＾（４）ＣＳ〉△＾（２）ＣＳ，ｋ＾（２）ＣＳ〉ｋ＾（３）ＣＳ〉ｋ＾（４）ＣＳ〉ｋ＾（５）ｃｓ。其△Ｇ＾     

PtRu纳米线的合成及其在直接甲醇燃料电池阳极中的催化活性

 分别以SBA-15和MCM-41介孔分子筛作模板剂,采用浸渍还原法制备了纵横比及合金度不同的双组元PtRu纳米线和纳米棒电催化剂. 透射电镜、 X射线衍射表征和电化学测试结果表明, PtRu纳米线具有较高的合金度和较大的纵横比,在甲醇硫酸溶液中表现出更好的电催化活性. 初步探讨了PtRu纳米线催化剂的合金度和纵横比对其电催化活性和电极性能的影响.