Effect of cooling rate in [(Fe0.5Co0.5)0.75B0.2Si0.05]100-xNbx alloy system on magnetic properties

The effect of cooling rate on the thermal stability and soft magnetic properties of [(Fe_0.5Co_0.5)_0.75B_0.2Si_0.05]_100-xNb_x (x = 5, 6, 7, 8 at. %) system was investigated. The alloys were produced into the form of ribbon and cylindrical rod by melt-spinning and injection casting, respectively. Their structure, thermal, mechanical and soft magnetic properties were investigated by x-ray diffraction, differential scanning calorimetry, universal testing machine and vibrating sample magnetometer, respectively. All of the alloys were identified as fully amorphous by X-ray diffraction. It turned out that the rod samples had exceptionally high saturation fields reaching 3.0 kOe, which is key properties for sensor application. Also, among these Fe,Co-based samples, the Fe_35.25 Co_35.25 B_18.8 Si_4.70 Nb₆ ribbon exhibits the highest saturation magnetization with 142.1 emu/g.     

熵驱大分子胶体粒子的柱状受限结晶

熵是物理化学的基本状态参量,在统计力学和热力学中处于核心位置.按照玻尔兹曼的微观解释,熵可以由孤立系统微观状态的数目(W)给出,即S=kBlnW,这里kB为玻尔兹曼常数[1,2].根据此公式,微观状态数越多,系统越混乱,熵越大,所以熵常被视作体系无序程度的度量.但熵增仅对应体系微观状态数的增加,与可观测的结构有序程度无关[3~5].在一些典型的软物质体系中,结构越有序熵反而越大,如胶体硬球在随机密堆积点的有序结晶[6]及描述各向异性棒状分子从各向同性相到向列相转变的Onsager原理[7].     

Recent progress in measurements of oscillatory forces and liquid properties under confinement

The present review paper focuses on direct measurements of oscillatory forces. Beside the surface forces apparatus (SFA), atomic force microscopy (AFM) has emerged as the most commonly used technique to measure surface forces. Recent instrumental advances of both methods are highlighted in the review. Different systems, showing oscillatory forces are classified. Principle distinction is made between 1-component liquids (water, organic liquids and liquid crystals), pseudo 1-component liquids (ionic liquids and microemulsions) and 2-component liquids (dispersions containing polyelectrolytes, micelles or nanoparticles). In the last few years, the oscillatory force studies address particle characterisation, synergistic effects in multicomponent systems, the introduction of ‘switchable’ forces, and resolving liquid properties under confinement. Last but not least, the ability of AFM and SFA to measure oscillatory forces is discussed.     

Characterization and electrochemical deposition of natural melanin thin films

Melanin is an important class of biological pigments because of its distinct chemical and physical properties. The electrochemical deposition of natural melanin thin films was studied using two different techniques; constant potential and cyclic voltammetry along with a deposition time of five hours. The thin films deposited electrochemically on a fluorine-doped tin oxide conductive glass substrate using the constant potential method, exhibited faster growth rate and better adhesion to the fluorine-doped tin oxide working electrodes than those deposited using the cyclic voltammetry method. The thin films deposited on the fluorine-doped tin oxide conductor glass using the constant potential method were also more homogeneous than those deposited via the cyclic voltammetry technique. The increase of film thickness is related to the increase of electrochemical deposition time. Interestingly, the electrochemical deposition using the constant potential method had the advantage of consuming less electric charge. The physical and chemical structures of the melanin thin films were characterized using ultraviolet–visible absorption spectroscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction analysis. The ultraviolet–visible absorption spectra showed the correlation between the variation of deposition rates of melanin and the type of electrochemical technique employed as well as the thickness of the film. The average thickness of the film is 500 nm which absorb 40% of light in both type of films. The atomic force microscopy images illustrated the homogeneous deposition of the melanin molecules on the fluorine-doped tin oxide conductive glass substrate, indicating that the thickness of the thin films can be controlled. We estimated an average grain size of 14.093 Å. The ease of preparing such thin films of organic materials can open new avenues towards the use of soft conductors, in contrast to the complex preparation of industrial semiconductors.     

非晶态Si/SiN_x超晶格材料的发光与非线性光学特性

采用射频磁控反应溅射技术制备了a-Si/SiN_x超晶格材料,并采用热退火技术对材料进行处理。利用吸收光谱和X射线衍射谱对材料进行表征,结果表明Si层呈现非晶态。为研究材料的三阶非线性光学特性,对材料进行Z扫描研究,测量数据表明,材料的非线性吸收为反饱和吸收,材料非线性折射率呈现为负值,该材料的χ(3)的实部为4.57×10~(-17)C(1.39×10~(-7)esu),虚部为1.49×10~(-17)C(4.48×10~(-8)esu),该极化率数值比体硅材料的χ(3)值大5个数量级。对该材料非线性光学产生的机理进行了研究,认为材料体现出的较强的量子限制效应是非线性极化率增强的主要来源。     

Proof of factorization using background field method of QCD

Factorization theorem plays the central role at high energy colliders to study standard model and beyond standard model physics. The proof of factorization theorem is given by Collins, Soper and Sterman to all orders in perturbation theory by using diagrammatic approach. One might wonder if one can obtain the proof of factorization theorem through symmetry considerations at the lagrangian level. In this paper we provide such a proof.     

Radiation damage in soft X-ray microscopy

The rates of chemical transformation by radiation damage of polystyrene (PS), poly(methyl methacrylate) (PMMA), and fibrinogen (Fg) in a X-ray photoemission electron microscope (X-PEEM) and in a scanning transmission X-ray microscope (STXM) have been measured quantitatively using synchrotron radiation. As part of the method of dose evaluation in X-PEEM, the characteristic (1/e) sampling depth of X-PEEM for polystyrene in the C 1s region was measured to be 4 ± 1 nm. Critical doses for chemical change as monitored by changes in the X-ray absorption spectra are 80 (12), 280 (40) and 1230 (180) MGy (1 MGy = 6.242*ρ eV/nm³, where ρ is the polymer density in g/cm³) at 300 eV photon energy for PMMA, Fg and PS, respectively. The critical dose for each material is comparable in X-PEEM and STXM and the values cited are thus the mean of the values determined by X-PEEM and STXM. C 1s, N 1s and O 1s spectroscopy of the damaged materials is used to gain insight into the chemical changes that soft X-rays induce in these materials.     

Flattened chromatic dispersion in square photonic crystal fibers with low confinement losses

This research presents a simple index-guiding square photonic crystal fibers (SPCFs) that has a silica core surrounded by air hole with two different diameters. It is demonstrated that the designed two-different-size hole-arrayed index-guiding SPCFs has a ultra-flattened chromatic dispersion of 0 ± 0.9 ps/(nm·km) in a wavelength range of 1.34 to 1.61 μm and low confinement loss of less than 10⁻⁷ dB/m in a wavelength range of 1.2 to 1.7 μm. It has also been shown that the proposed SPCFs show reasonable dispersion tolerance.     

Correlation of soft magnetic properties with free volume and medium range ordering in metallic glasses probed by fluctuation microscopy and positron annihilation technique

Amorphous ribbons of different thicknesses of Co_64.5Fe_3.5Si₁₆B₁₄Ni₂ alloy were synthesized using the melt spinning technique by varying wheel speed. The effect of cooling rate on the ribbon thickness and their soft magnetic properties have been studied. The amorphous structure has been characterized in terms of structural free volume and medium range order (MRO) by positron annihilation spectroscopy and fluctuation electron microscopy techniques. Positron lifetime spectra of amorphous samples showed two lifetime components. The first component was found to be correlated with MRO whereas, the second lifetime component was found to be associated with nanovoid type of defects, and the second component was strongly dependent on processing conditions. It could be established that the coercivity of the amorphous samples produced by the rapid solidification technique mainly depends on the defects formed during processing rather than change induced in MRO.