Determination of terbinafine in pharmaceuticals and dialyzates by capillary electrophoresis

A capillary electrophoresis method has been developed for the separation and determination of terbinafine (TER) in various pharmaceutically relevant matrices. Capillary zone electrophoresis (CZE) separation and UV absorbance photometric detection were carried out in a 160 mm capillary tube with a 300 μm i.d., hydrodynamically (membrane) closed. The influences of pH, carrier cation and counterion on migration parameters of TER were studied and the following conditions were selected: a 20 mmol l⁻¹ glycine running buffer adjusted to pH 2.7 with acetic acid, 0.2% (w/v) methylhydroxyethylcellulose (m-HEC) as an electro-osmotic flow (EOF) suppressor, a 250 μA driving current, and 20 °C. The optimized separation conditions were convenient for the determination of TER in commercial tablets and spray and in dialyzates. Here, the dialysis was used to investigate in vitro permeation of TER through the skin from the gel. The samples of dialyzates were examined with and without simple extraction procedure and the results were compared. A permeation profile of the drug present in the gel of given composition was obtained analyzing pretreated samples. The proposed electrophoretic method was successfully validated. It was suitable for the simple, sensitive, rapid and highly reproducible assay of TER. CZE analysis was completed within 5.5 min. The detection limit of TER was 1.73 μmol l⁻¹ at a 224 nm detection wavelength. The intra- and inter-laboratory precisions over the concentration range 6.0-60.0 μmol l⁻¹ were between 0.32-0.69% and 1.04-1.44% including R.S.D. of migration times and peak areas, respectively. The mean absolute recoveries of drugs from samples were found to be 98.34 (tablets) and 99.47% (spray). It is suggested that there are potentialities to determine TER present in unpretreated complex samples, as CZE in a hydrodynamically closed separation system may be easily on-line combinable with purification and preconcentration CE modes (e.g., isotachophoresis, ITP).     

阴离子交换树脂分离富集水中痕量镉

先用草酸处理水样中的镉离子,生成的[Cd(C2O4)2]2-络阴离子通过强碱性阴离子交换树脂分离富集,最后用火焰原子吸收分光光度法测定了水样中的痕量镉。该法简便,选择性好,富集倍数高,应用于实际水样的检测,回收率为98%~102%,结果令人满意。     

Fraktionierte Kristallisation von Ammonium- und Magnesiumdoppelnitraten der Ceriterden; Bestimmung der Trennfaktoren und Vergleich der Trennwirkung

Summary The Separation Factors for Pr/La, Nd/Pr, and Sm/Nd, characterizing the crystallization of ammonium and magnesium double nitrates under practical conditions, were determined analytically and are discussed. They confirm that La and Pr can be separated better by fractional crystallization of ammonium double nitrates, whereas in the presence of Sm the magnesium double nitrates are preferable.

     

Synthesis of New Reagent 2‐Acetylthiophenethiocynate and its Use in Extraction of Pt(IV) Spectrophotometrically

2‐Acetyl thiophenethiocynate (ATT) was synthesized and its characterization study was carried out using elemental analysis, IR and NMR techniques. The new reagent was proposed as an extractant for the development of the extractive spectrophotometric method for determination of Pt(IV) metal. The reagent complexes with the metal to produce a yellow colored complex which was then extracted into ethyl acetate at pH 11.2–11.6 having an absorption maxima at 400 nm. The thermal study showed that the extraction reactions are exothermic in nature with the reagent, and the stoichiometric ratio of Pt(IV) to 2‐acetyl thiophenethiocynate in the organic phase was 1:2. The method permits separation and determination of platinum from real and binary mixtures. The separation of Pt(IV) from bivalent metal ions has been also studied.     

D072型树脂脱除过氧化氢中金属阳离子的工艺研究

实验考察D072型阳离子交换树脂在交换柱中脱除过氧化氢中微量金属阳离子的动态行为．通过改变料液流速、高径比、料液中交换离子浓度及料液组成等参数，绘制不同条件下的透过曲线，以此考察D072型树脂对过氧化氢中金属阳离子的动态交换性能，从而确定适宜的工艺条件，为工业化生产提供科学依据．     

几种树脂对西红花糖苷的吸附性能的研究

本文系统研究了硅胶和几种国产吸附树脂对西红花提取物溶液的吸附与洗脱性能，包括树脂的筛选，洗脱剂的选择，并研究了pH，温度和西红花提取物的浓度对西红花提取在SZ－1吸附树脂上的吸附影响，结果表明，SZ－1吸附树脂对西红花提取物的吸附能力较强，洗脱能力为最好，其吸附性能和洗脱性能均优于常用色谱固定相硅胶，SZ－1吸附树脂的静态吸附容量为1．04g/g，动态吸附容量为0．5－0．6g/g，洗脱率可达98％以上，且吸附速度快，易于洗脱和再生。     

Preparation of pyrenebutyric acid-modified magnesia-zirconia stationary phases using phosphonate as spacers and their application to the separation of fullerenes

A novel method was proposed for the preparation of pyrenebutyric acid-modified magnesia-zirconia stationary phases. Pyrenebutyric acid was grafted to magnesia-zirconia composites with different pore sizes via the sodium salt of cis-(3-methyloxiranyl)phosphonic acid (fosfomycin) as spacers. Aminated fosfomycin was first absorbed onto the surface of magnesia-zirconia composites during the preliminary step to provide amino and hydroxy reactive sites. And then the pyrenebutyric acid was covalently attached to the amine or hydroxyl groups via amide or ester bonds. The resulting stationary phases were characterized by elemental analysis, diffused reflectance FT-IR, nitrogen adsorption analysis and ¹³C solid state NMR spectra. The HPLC separation of fullerenes on the new stationary phases with different pore sizes was also investigated. The chromatographic performance showed a dependence on the pore size of the magnesia-zirconia matrix. Little retention of fullerenes was observed on the stationary phase with pore sizes about 4.5 nm. However, on the modified magnesia-zirconia with pore sizes about 10 nm, selectivity factors (α) for C₇₀/C₆₀ separation were determined to be 1.76, 2.29, 2.41, 3.10, with carbon disulfide, chlorobenzene, xylene and toluene as mobile phases, respectively. And the high solubility of fullerenes in these solvents dramatically increased the overall potential with regard to preparative fullerene purification. Among the reported stationary phases with pyrene ligands, the pyrenebutyric acid-modified magnesia-zirconia (PYB-F-(ZrO₂-MgO)) with larger pore sizes exhibited the best selectivity for fullerenes. The thermodynamic and kinetic behavior of fullerenes was also examined.     

Optimized Separation of Nine Xanthones by Microemulsion Electrokinetic Chromatography

A microemulsion electrokinetic chromatography method has been firstly used for the separation of the therapeutically important xanthones from Securidaca inappendiculata. The separation of the nine xanthones was systematically optimized with respect to pH, composition of microemulsion,addition of cyclodextrins, applied voltage and column temperature. Baseline separation was successfully achieved for the nine xanthones, which was also compared with that by micellar electrokinetic chromtography.     

Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.     

反应条件对Mo2C/Al2O3催化的POM制合成气的影响

考察了反应温度、气体空速和进料中CH4：O2比值对Mo2C／Al2O3催化的POM反应制合成气的影响．结果发现较高的温度具有较高的甲烷转化率、CO和H2的选择性；而在较低的温度下，对CO的选择性比对H2的影响更大．反应气体的空速较小时对于甲烷的转化率、CO和H2的选择性是有利的；而在较高的气体空速下，氢气的选择性则更低．进料中CH4：O2比值稍高于2：1时有利于获得高的甲烷转化率、CO和H2的选择性．并且还可以增加催化剂的稳定性．当CH4：O2比值低于2：1时．甲烷转化率、CO和H2选择性随反应的进行急剧下降．而当此比值调整到高于2：1时．转化率和选择件都可以得到恢复。