Optical Glucose Monitoring Based on Femtosecond Two-Color Pulse Interferometry

We demonstrate the potential of femtosecond two-color pulse interferometry for in vitro optical glucose monitoring, by dispersion of the group refractive index in a glucose solution sample with respect to a red-color light and a blue-color light. By comparison with femtosecond one-color pulse interferometry, the basic performance of the present system with regard to sensitivity, quantitativeness, and tolerance to surrounding disturbances, is evaluated. The resulting accuracy and precision of glucose determination are 77 and 118mg/dl for 10-mm-sample-thickness, respectively. This near-common-path configuration of the two-color pulse light provides good stability to fluctuations of sample temperature, which is important in clinical applications. Considering the performance of femtosecond two-color pulse interferometry as an optical glucose sensor, a suitable measurement site for in vivo optical glucose monitoring is discussed.     

Spectroscopic and X-ray diffraction study of high Tc epitaxial YBCO thin films obtained by pulsed laser deposition

We report spectroscopic characterization of epitaxial YBCO thin films grown on LaAlO₃ by pulsed laser deposition. Raman spectroscopy and spectroscopic ellipsometry were used for film characterization and the results were correlated with X-ray diffraction measurements. The mentioned techniques allowed us to analyze crystallographic, micro-structural, and morphological properties of YBCO thin films. We also demonstrated that relatively low resolution Raman spectroscopy and spectroscopic ellipsometry are reliable techniques for a rapid and non-destructive characterization of epitaxial YBCO thin films.     

Effects of Moisture and Stresses on the Structure and Properties of Polyester Resin

The results of a complex study of structural changes in a cured Norpol 440 polyester resin under the action of damp environment and mechanical loading are presented. A considerable effect of absorbed moisture on the structure and some characteristics of the material is revealed by using thermophysical methods and X-ray diffractometry. The joint effect of moisture and mechanical stress is estimated by investigating the creep in stationary and nonstationary moisture conditions. The anisotropy of the material structure formed during creep is evaluated from the results of dilatometric measurements. It is found that the degree of anisotropy of the material after creep accompanied by moisture sorption is higher than that after creep in the conditions of moisture equilibrium with atmosphere. It is established that the aftercure and relaxation of the residual creep deformation come to an end at heating to 80-85°C. At a further rise in temperature and repeated heating, changes in the material structure are not observed.     

Gamow Vectors in Exactly Solvable Models

Through two examples: the Friedrichs model and a particular case of central potential scattering, we illustrate the way of constructing Gamow vectors.     

Multilayer optics for XUV spectral region: technology fabrication and applications

We present research investigations in the field of multilayer optics in X-ray and extreme ultra-violet ranges (XUV), aimed at the development of optical elements for applications in experiments in physics and in scientific instrumentation. We discuss normal incidence multilayer optics in the spectral region of “water window”, multilayer optics for collimation and focusing of hard X-ray, multilayer dispersing elements for X-ray spectroscopy of high-temperature plasma, multilayer dispersing elements for analysis of low Z-elements. Our research pays special attention to optimization of multilayer optics for projection EUV-lithography (ψ-13nm) and short period multilayer optics.     

Influence of annealing and chain defects on the melting behaviour of poly(vinylidene fluoride)

The melting behaviour of poly(vinylidene fluoride) (PVDF) was investigated by differential scanning calorimetry (DSC) and small- and wide-angle X-ray scattering in order to study the influence of the chain defects content and of the temperature of annealing on the crystallization and melting behaviour.All the DSC scans show a double endotherm and the analysis of the data suggests that the low temperature endotherm is due to the melting of a population of thin lamellae, whose thickness increases during the annealing, but a high content of chain defects prevents the lamellar thickening and the main effect in this case is the crystallization of thin lamellae from a portion of polymer which did not crystallize during the quenching from the melt. Furthermore, the two melting endotherms, which are observed, can be partially ascribed to a melting-recrystallization process.Furthermore, stepwise isothermal cooling was performed in a differential scanning calorimeter followed by melting scans of fractionated PVDF samples to point out the possible presence of a series of endothermic peaks.     

Finite-Dimensional Approximations for Scattering Theory Operators in the Wave-Packet Representation

We consider some types of packet discretization for continuous spectra in quantum scattering problems. As we previously showed, this discretization leads to a convenient finite-dimensional (i.e., matrix) approximation for integral operators in the scattering theory and allows reducing the solution of singular integral equations connected with the scattering theory to some suitable purely algebraic equations on an analytic basis. All singularities are explicitly singled out. Our primary emphasis is on realizing the method practically.     

The role of emitter quasi-bound state and scattering on intrinsic bistability in resonant tunneling diodes

Usually, numerical self-consistent calculations predict a much larger intrinsic bistability region than actually is measured in resonant tunneling diodes (RTDs). In addition, numerical calculations have shown that scattering in the well reduces bistability. We used a unified treatment of current flowing from continuum states and emitter quasi-bound states to show numerically and analytically that not only the scattering in the quantum well but also the scattering in the emitter reduces bistability. Moreover, within the Hartree approximation, bistability occurs by tunneling resonantly between emitter quasi-bound state and well quasi-bound state as a pitchfork bifurcation.     

Charge density study under high pressure

The experimental and analytical method of the high-pressure powder experiment at BL10XU, SPring-8, is described. There is no doubt that BL10XU must be one of the most appropriate beam lines for high pressure X-ray diffraction experiment taking advantage of third generation synchrotron source. As an example of the advanced charge density study under high pressure, the structural change of Cs₂Au₂Br₆ by applying pressure is studied by Rietveld/MEM analysis. It reveals that the structural change of Cs₂Au₂Br₆ by applying pressure occurs basically at electron level, such as valence state change and chemical bonding, which may be called the electronic phase transition.     

A new polar nephelometer for measurement of atmospheric aerosols

The angular dependence of light scattered by aerosol particles in the atmosphere—the aerosol phase function—is one of the key properties of every radiative transfer and climate model. Side-scattering in the atmosphere is currently believed to be underestimated by most of the radiative transfer models in certain cases. The aerosol phase function can be measured with polar nephelometers.An innovative polar nephelometer able to measure the phase function of ambient aerosol directly is presented in this publication. The performance of the device was simulated completely using ray-tracing techniques. The results of these simulations are used to interpret the measurement data precisely. The measurements with the new polar nephelometer are fully automated. The quality of the measurement results was verified using different approaches. The values of the statistical and systematic error in measuring atmospheric aerosol are about 4% each. Scattering angles from 10° to 160° were measured and it is shown that with the same design this range can be extended to 3-177° in steps of 0.16° with an aperture of less than 1.8°.Measurements of the aerosol phase function are presented and compared with data taken with an integrating nephelometer and measurements of the particulate matter concentration. All data correlate very well. The described polar nephelometer can measure the phase function and the scattering coefficient of atmospheric aerosol with high accuracy and can be used for continuous monitoring measurements as well as in field campaigns.