On the interaction of HBT with pulp lignin during mediated laccase delignification—a study using fractionated pyrolysis-GC/MS

An analytical method using fractionated pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) was developed and applied for characterizing the type of interaction between 1-hydroxybenzotriazole (HBT)-mediator and pulp lignin in laccase delignification of pulp. In fractionated pyrolysis, the sample is pyrolyzed at progressively increasing temperatures in order to study particular fractions of the sample and to minimize secondary pyrolysis effects. This makes it possible to determine whether a certain pyrolysis product originates from one chemical moiety or different chemical moieties in one molecule. In the present method, samples were fractionated by thermal desorption at 200 °C followed by pyrolysis at progressively increasing temperatures from 320 to 800 °C. The products formed in each fraction were separated in a capillary GC column and detected and identified using MS. The type of interaction between HBT and pulp lignin was studied by following the formation of nitrogen-containing products during fractionated pyrolysis of a residual lignin isolated from laccase/HBT-treated oxygen-delignified softwood kraft pulp. This residual lignin was found to contain approximately 2% HBT residue. Most (87%) of this residue was covalently linked to the residual lignin. The results also strongly suggest that the HBT residue is present in two chemically different forms.     

碳前驱体CH3ArCH2NH2的热解性能及动力学研究

通过密闭压力容器法、常压DSC、高压DSC及紫外分光光度定量分析法等实验手段,对液相沉积法制碳／碳复合材料用碳前驱体CH3ArCH2NH2的热裂解行为进行了研究,获得不同温度、不同压力下该碳前驱体的热分解温度和残碳率,用等温动力学和非等温动力学方法获得了热裂解反应的表观活化能,实验结果表明,常压热裂解温度大约为530．15－556．55K,1－3MPa的高压范围内的热裂解温度大约在618．34－675．49K,密闭压力容器中的残碳率为56．23％,常压下的残碳率为28．96％－36．47％,而高压下残碳率可达59．11％,根据基辛格等方法获得了等温条件下和非等温条件下热裂解反应的表观活化能Ea分别为206．78kJ/mol和183．93kJ/mol, 反应级数N~1.     

Formaldehyde‐Free Wood Adhesives from Decayed Wood

Summary: Extensive studies using mussel adhesive protein as a formaldehyde‐free, strong, and water‐resistant adhesive model revealed that a combination of a polymer with catechol moieties and a polymer with amino groups could serve as a strong and water‐resistant wood adhesive. This study demonstrated that the treatment of abundant and readily available brown‐rot‐fungus‐decayed wood with NaBH₄ followed by mixing with polyethylenimine resulted in a formaldehyde‐free, strong, and water‐resistant wood adhesive.

Lignin is demethylated by brown‐rot fungi and then reduced using NaBH₄.     

过氧化氢调控藜芦醇介导木素过氧化物酶催化氧化邻苯三酚红研究

木素过氧化物酶(LiP)催化H₂O₂氧化邻苯三酚红(PR)反应的氧化产物受H₂O₂与PR的摩尔比控制, H₂O₂与PR的摩尔比不同, 所得降解产物不一样. 分析表明, H₂O₂在LiP催化氧化PR过程中的双重作用(即低浓度的H₂O₂是LiP的激活剂, 高浓度的H₂O₂是LiP的抑制剂)是导致上述现象的根本原因. 藜芦醇(VA)对LiP催化氧化PR的反应有促进作用, 尤其是当H₂O₂与PR的摩尔比较高时这种促进作用更为明显; 然而PR对LiP催化氧化VA的反应却有抑制作用. 后者可以用来解释为什么在用白腐菌降解染料时在培养液中常常检测不到LiP的藜芦醇活力. 分析表明, VA的存在不但促进了LiP酶中间体LiP(II)和/或LiP(III)向LiP的转化, 使LiP的催化循环加速, VA生成的VA^＋·也间接氧化了染料PR, 从而使PR的氧化速率提高.     

近红外光谱法快速测定毛竹Klason木质素的含量

研究了用近红外漫反射光谱法对毛竹Klason木质素含量的快速预测。选取了代表不同竹龄、不同高度和横向不同位置的54个竹材粉末样品,用常规实验室方法测定了54个样品的Klason木质素含量,用近红外光谱仪漫反射方式在350～2500 nm范围内采集相应样品的光谱,利用多变量统计分析软件建立样品木质素含量和光谱数据之间的相关性模型。结果表明,对原始光谱进行二阶导数预处理后,选择1 011～1675 nm和1930～2488 nm波长区间,用偏最小二乘法(PLS1)和完全交互验证方式建立了的校正模型和预测模型的相关系数分别为0.99,和0.97,校正标准误差SEC＝0.36％,预测标准误差SEP=0.59％,说明毛竹Klason木质素含量和近红外光谱之间存在非常好的相关性,用近红外光谱技术可以实现对竹材样品中Klason木质素含量的快速预测。     

直链醇对反胶束体系中木素过氧化物酶催化活性的影响

根据研究发现, 在有醇作助表面活性剂的CTAB反胶束中木素过氧化物酶(LiP)不能表现活力, 而在水介质中CTAB对LiP的催化活性影响又不是很大. 为了揭示其中醇的影响, 本工作就不同碳链长度的醇对LiP酶催化性能的影响进行了研究. 由于CTAB反胶束体系中醇浓度较高, 且碳原子数大于4的直链醇在水中的溶解度又很小, 为此采用了LiP可在其中显示催化活性的CTAB正胶束、AOT反胶束和Brij30反胶束作介质, 通过研究这些介质中不同链长的醇对LiP催化活力的影响, 来探讨CTAB反胶束中木素过氧化物酶(LiP)不能表现活力的原因. 结果表明, 不管表面活性剂聚集体的结构、电性质及反胶束大小如何, 只要醇的浓度超过500 mmol•L^－1 (丁醇≥1200 mmol•L^－1), LiP在上述原本可显示活力的介质中均无催化活性. 据此推测CTAB反胶束中木素过氧化物酶(LiP)不能表现活力的原因主要是由助表面活性剂醇造成的.     

Biotransformation of Aspen Lignin by the Fungus Trametes villosus

Quantitative ¹ H and ¹³ C NMR spectroscopies demonstrate that biotransformation of aspen wood by the fungusTrametes villosusresults in oxidation and destruction of lignin with cleavage of C-C alkyl-alkyl bonds in side chains and partial demethoxylation in addition to cleavage of lignocarbohydrate bonds. New C _ar -O-C bonds form while lignin is being destroyed at alkyl-alkyl bonds. Cleavage of rings and destruction of C _ar -C bonds was not observed.     

Adsorption of phenol and 2,4-dichlorophenol on carbon-containing sorbent produced from sugar cane bagasse

1. Download : Download high-res image (149KB)
2. Download : Download full-size image