Effect of flame-sprayed Al–12Si coatings on the failure behaviour of pressurized fibre-reinforced composite tubes

Internal pressurization testing at room temperature was performed to evaluate the effect of flame-spraying aluminum-12silicon on the leakage behavior of fibre-reinforced composite tubes fabricated by filament winding, and covered with garnet sand. A group of specimens were completely coated with flame-sprayed metal particles and another set remained uncoated. t-tests were conducted at a significance level of α = 0.05 to analyze the effect of the coating on the leakage behavior of the specimens. Ultraviolet imaging was used to illustrate a characteristic leakage pattern of the composite tubes. Coated specimens exhibited slightly higher mean leakage and burst pressures than the uncoated specimens. The t-test results provided strong statistical evidence that the flame spraying process employed did not damage the filament wound tubes covered with garnet sand.     

非低温法的稀有气体纯化技术概述

稀有气体广泛应用于工业生产中,如离子刻蚀、检漏等。但是它们在地球上的含量比较少,属于稀有资源,因此需要对它们进行纯化以循环再利用。首先介绍了不同气体纯化的原理,然后以实际生产中的不同稀有气体使用范围为例,说明纯化装置的设计方法和需要考虑的问题。为以后气体纯化装置的设计提供借鉴。     

Effect of external pressure on the Kβ/Kα X-ray intensity ratios of 3d metals

The occupation numbers of the 3d transition metals are calculated as a function of pressure by means of the linear muffin-tin-orbital method. This data is used with the multiconfiguration Dirac-Fock (MCDF) X-ray intensity ratios (R) to estimate the variation of the intensity ratios of 3d metals with pressure. It is found that R decreases with pressure for the early 3d metals whereas it increases for the heavier 3d transition metals.     

A comparative first-principles study on electronic structures and mechanical properties of ternary intermetallic compounds Al8Cr4Y and Al8Cu4Y: Pressure and tension effects

An investigation into the bulk properties, elastic properties and Debye temperature under pressure, and deformation mode under tension of Al₈Cu₄Y and Al₈Cr₄Y compounds was investigated by using first principles calculations based on density functional theory. The calculated lattice constants for the ternary compounds (Al₈Cu₄Y and Al₈Cr₄Y) are in good agreement with the experimental data. It can be seen from interatomic distances that the bonding between Al1 atom and Cr, Y, and Al2 atoms in Al₈Cr₄Y are stronger than Al₈Cu₄Y. The results of cohesive energy show that Al₈Cr₄Y should be easier to be formed and much stronger chemical bonds than Al₈Cu₄Y. The bulk modulus B, shear modulus G, Young's modulus E and Poisson's ratio ν can be obtained by using the Voigt–Reuss–Hill averaging scheme. From the results of elastic properties, Al₈Cr₄Y has the stronger mechanical behavior than Al₈Cu₄Y. Our calculations also show that pressure has a greater effect on mechanical behavior for both compounds. The ideal tensile strength are obtained by stress-strain relationships under [001](001) uniaxial tensile deformation, which are 15.4 and 23.4 GPa for Al₈Cu₄Y and Al₈Cr₄Y, respectively. The total and partial density of states and electron charge density under uniaxial tensile deformations for Al₈Cu₄Y and Al₈Cr₄Y compounds are also calculated and discussed in this work.     

Temperature dependence of GaSb and AlGaSb solar cells

Sb-based alloys offer great potential for photovoltaic and thermophotovoltaic applications. In this paper, we study the performance of Al_xGa_1-xSb (x = 0, 0.15, and 0.50) single-junction solar cells over a temperature range of 25–250 °C. The dark current-voltage, one-sun current-voltage, and external quantum efficiency measurements were acquired at different temperatures. Correlations between experimental and numerical results are made to draw conclusions about the thermal behavior of the cells. It is shown that, while the bandgaps decrease linearly with temperature leading to the reduction of open-circuit voltages, the short-circuit current densities decrease with non-linear trends. The temperature-dependent dark current densities were extracted by fitting the dark current-voltage curves to single- and double-diode models to give an insight into the effect of intrinsic carrier concentration (n_i) on the cell performance. We find that the n_i has a significant impact on temperature-dependent cell performance. These findings could lay a groundwork for the future Sb-based photovoltaic systems that operate at high temperatures.     

Viscosity dependence of electrochemical etching for gold tip fabrication

We suggest an electrochemical etching method with viscous etchant to enhance the sharpness of tip of scanning probe microscope. The viscosity of the etchant mixed with HCl solution and glycerol was used as a control parameter in addition to the voltage applied to the tip. In order to improve the sharpness of the tip, a nano-scale meniscus formed between the end of the tip and the liquid level was used. The shapes, aspect ratios, and radii of tips were measured depending on the concentration of the etchant. It was found that the tip etched with the mixed liquid with glycerol was sharper than the tip with the pure HCl solution. This can be explained by the fact that the meniscus formed by viscous liquid is maintained with a thinner diameter and causes final etching until the meniscus bridge is ruptured.     

Instant Controlled Pressure Drop technology: From a new fundamental approach of instantaneous transitory thermodynamics to large industrial applications on high performance–high controlled quality unit operations

Solvent extraction processes have been largely used in various industries. They recently were improved through new physical concepts such as CO₂ Supercritical Fluid Extraction, Ultrasound assisted process, Microwave-assisted extraction, Instant Controlled Pressure Drop DIC-assisted extraction… Systematically, a pretreatment stage of grinding takes place in order to improve the exchange surface increasing the starting accessibility. Swelling of the material structure implies an increase of the porosity thus leading to higher solvent diffusivity within the solid matrix. A new concept of expanded granule powder has recently been defined using Instant Controlled Pressure Drop DIC technology. Whatever the type of solvent is (even CO₂-SFE), such a swelled structure dramatically intensifies the kinetics through a higher specific exchange surface thanks to the open pores, while improving the solution solvent–solute diffusivity within the solid. Coupled to ultrasound, the internal transfer of solute within the pore solvent can likewise be intensified by replacing molecular diffusion within the pores by an effective convection transfer. In this work, we carried out a first approach of modeling of solvent extraction kinetics of expanded granules involving higher exchange surface and greater internal diffusion process.     

Statistical inference for Vasicek-type model driven by Hermite processes

Let $Z$ denote a Hermite process of order $q\ge 1$ and self-similarity parameter $H\in (\frac{1}{2},1)$. This process is $H$-self-similar, has stationary increments and exhibits long-range dependence. When $q=1$, it corresponds to the fractional Brownian motion, whereas it is not Gaussian as soon as $q?2$. In this paper, we deal with a Vasicek-type model driven by $Z$, of the form $d{X}_t=a(b?X_t)dt+d{Z}_t$. Here, $a>0$ and $b\in \mathbb{R}$ are considered as unknown drift parameters. We provide estimators for $a$ and $b$ based on continuous-time observations. For all possible values of $H$ and $q$, we prove strong consistency and we analyze the asymptotic fluctuations.     

基于石墨烯/石墨烯卷轴复合薄膜高灵敏度柔性压力传感器

一维导电材料例如纳米线，大量应用于柔性压力传感器中. 但是一维材料和基底之间接触时相互作用力较弱，使得传感器灵敏度、响应时间、和循环寿命等性能指标有待进一步提高. 针对这些问题，设计了石墨烯/石墨烯卷轴多分子层复合薄膜作为传感器导电层. 石墨烯卷轴具有一维结构，而石墨烯的二维结构可以牢固地固定卷轴，以确保高导电性复合薄膜与基底之间的粘附性，同时整体结构的导电通道得到了增加. 由于一维和二维结构的协同效应，实现了应变灵敏度系数3.5 kPa^-1、 响应时间小于50 ms、能够稳定工作1000次以上的压阻传感器.