A new catalytic method for the synthesis of selectively substituted biphenyls containing an oxoalkyl chain

A novel reaction sequence leading to the synthesis of substituted biphenyls containing a carbonyl group in an aliphatic chain has been achieved in one-pot reaction starting from iodoarenes and allylic alcohols under the catalytic action of palladium and norbornene. The latter is temporarily incorporated into a palladacycle, which directs the reaction towards the selective formation of an arylaryl bond. Norbornene spontaneously deinserts to allow the biphenylylpalladium bond thus formed to react in its turn with the allylic alcohol.     

牛血清白蛋白与十二烷基硫酸钠作用的机理

利用电动势法得到了牛血清白蛋白(BSA)与十二烷基硫酸钠(SDS)相互作用的结合等温线. 通过四阶导数紫外光谱法和荧光光谱法研究了相互作用过程中芳香族氨基酸残基微环境极性的变化. 通过研究发现, 随着SDS浓度的逐渐增大, SDS在BSA上的平均结合数(v)逐渐增大, 色氨酸(Trp)残基所处微环境的极性在减弱后保持基本不变, 酪氨酸残基所处微环境的极性在明显增强后稍有减弱, 苯丙氨酸残基所处微环境的极性略有增强. 结果表明, 当v由0增大到14时, SDS主要结合在BSA的Trp-213附近并逐渐形成聚集体, 从而诱导BSA由结构域ⅡA 开始逐渐展开. 此后, SDS呈正协同作用的特点与BSA 结合, v急剧增大. 当v约为302 时, SDS在BSA上的结合基本达到饱和, BSA的构象趋于稳定.     

牛血清白蛋白与十二烷基硫酸钠作用的机理

利用电动势法得到了牛血清白蛋白(BSA)与十二烷基硫酸钠(SDS)相互作用的结合等温线. 通过四阶导数紫外光谱法和荧光光谱法研究了相互作用过程中芳香族氨基酸残基微环境极性的变化. 通过研究发现, 随着SDS浓度的逐渐增大, SDS在BSA上的平均结合数(v)逐渐增大, 色氨酸(Trp)残基所处微环境的极性在减弱后保持基本不变, 酪氨酸残基所处微环境的极性在明显增强后稍有减弱, 苯丙氨酸残基所处微环境的极性略有增强. 结果表明, 当v由0增大到14时, SDS主要结合在BSA的Trp-213附近并逐渐形成聚集体, 从而诱导BSA由结构域ⅡA 开始逐渐展开. 此后, SDS呈正协同作用的特点与BSA 结合, v急剧增大. 当v约为302 时, SDS在BSA上的结合基本达到饱和, BSA的构象趋于稳定.     

Fluorescence optosensor using an artificial neural network for screening of polycyclic aromatic hydrocarbons

This paper presents an optosensor for screening of four polycyclic aromatic hydrocarbons: anthracene (ANT), benzo[a]pyrene (BaP), fluoranthene (FLT), and benzo[b]fluoranthene (Bbf) using a photomultiplier device with an artificial neural network as transducer. The optosensor is based on the on-line immobilization on a non-ionic resin (Amberlite XAD-4) solid support in a continuous flow. The determination was performed in 15 mM H₂PO₄⁻/HPO₄²⁻ buffer solution at pH 7 and 25% of 1,4-dioxane. Feed forward neural networks (multiplayer perceptron) have been trained to quantify the considered Polycyclic aromatic hydrocarbons (PAHs) in mixtures under optimal conditions. The optosensor proposed was also applied satisfactorily to the determination of the considered PAHs in water samples in presence of the other 12 EPA–PAHs.     

A Large Volume Injection Procedure for GC-MS Determination of PAHs and PCBs

A simple on-column injection system for large volume of liquid samples for the GC-MS determination of traces of PAHs and PCBs has been investigated. A deactivated fused silica capillary 20 m × 0.53 mm I.D. and 2 meters of an HP5 column (0.53 mm,1 m film thickness) were used as retention gaps. Injection volumes of 80 L for PAHs and 90 L for PCBs, allow determination of 5–50 ng L^–1 PAHs and 11–44 ng L^–1 PCBs in hexane solution with an RSD of < 10%. The method has been used for the determination of PCBs and PAHs in soil sample.     

Two new marine sediment standard reference materials (SRMs) for the determination of organic contaminants

Two new marine sediment standard reference materials (SRMs), SRM 1941b Organics in Marine Sediment and SRM 1944 New York/New Jersey Waterway Sediment, have been recently issued by the National Institute of Standards and Technology (NIST) for the determination of organic contaminants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyl (PCB) congeners, and chlorinated pesticides. Both sediment SRMs were analyzed using multiple analytical methods including gas chromatography/mass spectrometry (GC/MS) on columns with different selectivity, reversed-phase liquid chromatography with fluorescence detection (for PAHs only), and GC with electron capture detection (for PCBs and pesticides only). SRM 1941b has certified concentrations for 24 PAHs, 29 PCB congeners, and 7 pesticides, and SRM 1944 has certified concentrations for 24 PAHs, 29 PCB congeners, and 4 pesticides. Reference concentrations are also provided for an additional 58 (SRM 1941b) and 39 (SRM 1944) PAHs, PCB congeners, and pesticides. SRM 1944, which was collected from multiple sites within New York/New Jersey coastal waterways, has contaminant concentrations that are generally a factor of 10–20 greater than SRM 1941b, which was collected in the Baltimore (Maryland) harbor. These two SRMs represent the most extensively characterized marine sediment certified reference materials available for the determination of organic contaminants.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Fluorescent probes for detection of biothiols based on “aromatic nucleophilic substitution-rearrangement” mechanism

“Aromatic nucleophilic substitution-rearrangement (SNAr-rearrangement)” mechanism provided a powerful tool to design fluorescent probes for the discrimination between biothiols.     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

Simultaneous Determination of Aromatic Amines by Liquid Chromatography Coupled with Carbon Nanotubes/Poly (3-methylthiophene) Modified Dual-Electrode

Liquid chromatography with amperometric detection (LC-AD) is developed and applied to simultaneously determine five aromatic amines. In the LC-AD, a new carbon nanotubes/poly(3-methylthiophene) modified dual-electrode is fabricated and then used as the working electrode. It is found that this chemically modified electrode (CME) exhibits efficiently electrocatalytic oxidation for aromatic amines with relatively high sensitivity, stability and long-life. Thus, lower detection in LC-AD can be achieved, which are 4.0 × 10^–8 mol L^–1 for aniline, 1.6 ×10^–7 mol L^–1 for 4-nitroaniline, 1.0 × 10^–7 mol L^–1 for 4-chloroaniline, 1.5 × 10^–7 mol L^–1 for 1-naphthylamine, 1.7 × 10^–7 mol L^–1 for 2-bromoaniline. The recoveries of the five analytes are also determined, which range between 0.95 and 1.05 for drinking water, 0.86 and 1.10 for the LiWa River water.     

Synthesis and characterization of new polyamides derived from di(4-cyanophenyl)isosorbide

New optically active polyamides were synthesized according to two ways: using a microwave-assisted polycondensation of an optically active isosorbide-derived diacylchloride with different aromatic diamines in NMP and using interfacial polymerization from an isosorbide-derived diamine with different diacylchlorides. The polymers are obtained with inherent viscosities in the range from 0.11 to 1.05 dL/g. The DSC and TGA measurements clearly demonstrate the high thermal stability of these polymers when considering the range of the melting points from 200 °C to 300 °C and the absence of decomposition till 350 °C.