Synthesis and characterization of PAni–SiO2 and PTh–SiO2 nanocomposites' thin films by plasma polymerization

In the present work, we explore the possibility to deposit polyaniline–silicon dioxide (PAni–SiO₂) and polythiophene–silicon dioxide (PTh–SiO₂) nanocomposites through a plasma polymerization route. The films were generated by spraying of mixtures of nano-sized silica particles dispersed in the liquid monomer into a plasma stream of the DC-plasma discharge reactor. The silica in the resulted polymer matrix changes the conduction mechanisms varying from ohmic to ballistic and traps inducing the space charged limited currents (SCLC). The silica modifies the morphology and composition of the deposited films.     

On the Reactivity of Silver Electrodes in a Chlorine Radiofrequency Plasma — Plasma Oxidation vs. Thermal Oxidation

The plasma‐electrochemical growth of an ion‐conducting film by the oxidation of a metal in an electronegative plasma is investigated and compared with results from thermal oxidation. As model system we studied the oxidation kinetics of silver electrodes in a Cl₂ rf plasma. The electrochemical control of the reaction by external currents through the product layer using the plasma as a fluid electrode was achieved. Both potentiostatic and galvanostatic control of the reaction was applied. The morphology of the product layer and its temporal evolution was investigated using SEM. A formation of silver chloride surface patterns in the oxidation process takes place if a simple stability criterion is not fulfilled. Specific surface morphologies were found under different experimental conditions. The morphology of the product layer is influenced by the external electric current and the substrate temperature. The influence of the plasma phase on the thermodynamics and kinetics of the oxidation process is discussed. The role of excited plasma species, the electrical charging of the surface and radiation from the plasma are taken into account.     

A specific sensitive HPLC method for determination of plasma dopamine

Summary We describe here a sensitive, selective and rapid method to quantitate plasma catecholamines, especially dopamine, using high-performance liquid chromatography with electrochemical detection. This method requires a 10-minute run time and has a threshold for detection of 2 picograms, (10pg/ml).A number of commonly employed mobile phases for catecholamine analysis have been tested and have failed to detect dopamine in biological samples. Neither acetonitrile (3–7%) or methanol, (5–8%) in the mobile phase has produced consistently interpretable data either due to inability to detect or interference from co-eluting substances. Optimal detection was achieved with a mobile phase containing sodium acetate (6.8g), citric acid (5.9g), EDTA (48mg), di-n-butylamine (270l), Na-1-octane sulfate (850mg), methanol (100 ml) (amounts refer to 1 liter aqueous solution) (pH 4.3). The mobile phase was passed through a Waters 5 resolve C₁₈ column using a Waters 590 pump and m460 electrochemical detector and 740 data module, Flow rate was 0.9ml/min. Using this method, normal values in human and swine left ventricular myocardium and human and swine plasma have been established for norepinephrine, epinephrine, and dopamine.     

等离子体聚萘薄膜作发光层的蓝色发光二极管

等离子体聚萘薄膜作发光层的蓝色发光二极管马於光，唐建国，张海峰，沈家骢，刘式墉，刘晓东（吉林大学分子光谱与分子结构开放实验室，集成光电子学国家重点实验室，长春，１３００２３）（白求恩医科大学）关键词等离子体聚合物，蓝光，发光二极管Ｂｕｒｒｏｕｇｈｅｓ...     

等离子体辐照的聚乙烯表面接枝交联共聚合

聚合物利用低温等离子体预辐照进行表面接枝共聚合已有报道.此方法的优点是接枝层被限制在聚合物表面,辐照过程对基材本体性质无影响,且整个过程对环境无污染. 用等离子体使聚合物表面产生自由基,不需要表面具有不饱和键或特殊官能团,因而适用于任何聚合物,甚至于一些无机物如玻璃等.利用等离子辐照后暴露于空气的聚合物表面上生成的过氧自由基或过氧化物进行接枝反应,一般接枝量不大.本工作中,我们自己设计了反应器,以超高分子量聚乙烯(UHMWPE)为基材,以甲基丙烯酸甲酯(MMA)为接枝单体,在无氧条件下利用等离子体辐照产生的表面自由基进行了接枝聚合,产物接枝量高达10％.还用顺磁共振技术对表面自由基性质及其在接枝过程中的行为进行了跟踪研究.     

Multi-element Saha–Boltzmann and Boltzmann plots in laser-induced plasmas

A multi-element Saha–Boltzmann plot method is proposed for the determination of the temperature and the relative number density in laser-induced plasmas, assuming local thermodynamic equilibrium and stoichiometry conservation. The method has been applied to the characterization of a plasma generated with a Cu–Fe–Ni–Mn alloy, using a Nd:YAG laser in air at atmospheric pressure. Spectra of the local emissivity have been obtained by spatial deconvolution of the intensity spectra, obtained with spatial resolution. Saha–Boltzmann plots obtained from the emissivities of 58 spectral lines of Fe I, Fe II, Ni I, Ni II, Mn I and Mn II have been fitted to linear behavior with high correlation, which shows the validity of the equation proposed. Radial distributions of the temperature and number densities of neutral atoms and ions have been determined. The results obtained reinforce the initial considerations of local thermodynamic equilibrium and conservation of stoichiometry. The proposed equation can also be applied to only one ionization species (multi-element Boltzmann plot). Spatially-integrated measurements of the plasma emission have also been performed to show that, in this case, the application of the method to the line intensities provides the two different apparent temperatures for neutral atoms and ions.     

流动注射在线柱预富集-电感耦合等离子体原子发射光谱测定痕量金属元素

本文报道了流动注射在线柱预富集ICP光谱测定痕量金属的方法,以meso-四(4-磺基苯)卟啉为柱前衍生试剂,硅胶作固定相和盐酸作洗脱液,对痕量金属离子Cu、Mn、Ni、Fe、Pb、Cd进行在线预富集检测。在给定实验条件下,方法的富集倍数为9.3～11.3,检出限和测定的相对标准偏差(n=6)分别在0.32～26.8ng/ml和1.3％～3.0％范围内。方法用于小牛肝和西红柿叶样品分析,结果与参考值吻合。     

PREPARATION OF CUO/γ-Al2O3 CATALYSTS FOR CATALYTIC COMBUSTION VOCS VIA PLASMA

CuO/γ-Al2O3 catalysts were prepared by plasma treatment and conventional impregnation methods. The catalytic combustion of two kinds of volatile organic compounds (VOCs), toluene and benzene, were carried out over these CuO/γ-Al2O3 catalysts. The surface properties of these catalysts were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The experimental results showed that in catalytic combustion the activity of the CuO/γ-Al2O3 catalyst prepared via plasma was much higher than that of the CuO/γ-Al2O3 catalyst prepared by conventional impregnation method. XRD results showed that an enhanced dispersion had been achieved with the plasma treatment. SEM results indicated that the size became much smaller and the surface became more uniform with the plasma treatment.     

Electrical and photoelectrical studies of plasma polymerized acrylonitrile

The electrical and photoelectrical properties of plasma polymerized acrylonitrile (PAN) are reported. The polymer films were studied in silver-PAN-silver systems. Electrical conductivity at room temperature was of the order of 10⁻¹¹ ohm⁻¹ cm⁻¹. The space charge limited current (SCLC) studies at room temperature and thermally stimulated current studies (TSC) over a temperature range of 290–500°K led to a clear understanding of carrier concentration, carrier mobility, trapping levels and activation energies. Photoelectric measurements were used to draw a band picture in plasma depositedPAN.     

Analytical Detectors Based on Microplasma Spectrometry

Miniaturizing all dimensions of apparatus, such as electronics and computers, is the current trend followed by scientists in various fields. The idea of Lab-on-a-Chip has significantly expanded and found its broad applications in analytical chemistry. Microplasmas can act as a sample excitation source and are the miniaturized versions of full-sized plasmas. These can be created in various forms, such as direct current, microwave induced, capacitively coupled and inductively coupled plasmas. Scaling down the size would reduce the amount of gases, liquids and consumables required, as well as the sample analysis time, which in turn would decrease the operating costs. Therefore, several research groups are involved in the development of microplasmas for utilisation in analytical instruments.