淀粉接枝丙烯酸/醋酸乙烯酯高吸水性树脂的制备

以过硫酸铵为引发剂,N,N-亚甲基双丙烯酰胺为交联剂,淀粉与丙烯酸/醋酸乙烯酯混合单体通过接枝共聚,制备了吸水及耐盐性能均较好的淀粉接枝丙烯酸/醋酸乙烯酯高吸水性树脂(CGAV)。最佳工艺条件为:淀粉10.0 g,m(混合单体)∶m(淀粉)=4∶1,w(引发剂)=0.3%,w(交联剂)=0.05%,于45℃反应2h~3 h。在最佳工艺条件下制得的CGAV吸去离子水率760 g.g-1,吸0.9%NaC l水溶液率68 g.g-1。     

Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter

This paper reports an investigation of the effects of solvent system, solution concentration, and applied electrostatic field strength (EFS) on the morphological appearance and/or size of as-spun cellulose acetate (CA) products. The single-solvent systems were acetone, chloroform, N,N -dimethylformamide (DMF), dichloromethane (DCM), methanol (MeOH), formic acid, and pyridine. The mixed-solvent systems were acetone–DMAc, chloroform–MeOH, and DCM–MeOH. Chloroform, DMF, DCM, MeOH, formic acid, and pyridine were able to dissolve CA, forming clear solutions (at 5% w/v), but electrospinning of these solutions produced mainly discrete beads. In contrast, electrospinning of the solution of CA in acetone produced short and beaded fibers. At the same solution concentration of 5% (w/v) electrospinning of the CA solutions was improved by addition of MeOH to either chloroform or DCM. For all the solvent systems investigated smooth fibers were obtained from 16% (w/v) CA solutions in 1:1, 2:1, and 3:1 (v/v) acetone–DMAc, 14–20% (w/v) CA solutions in 2:1 (v/v) acetone–DMAc, and 8–12% (w/v) CA solutions in 4:1 (v/v) DCM–MeOH. For the as-spun fibers from CA solutions in acetone–DMAc the average diameter ranged between 0.14 and 0.37 μm whereas for the fibers from solutions in DCM–MeOH it ranged between 0.48 and 1.58 μm. After submersion in distilled water for 24 h the as-spun CA fibers swelled appreciably (i.e. from 620 to 1110%) but the physical integrity of the fibrous structure remained intact.     

Polymer-Titanium hybrids obtained by radical polymerization and Sol-Gel process

The possibility to prepare hybrids made by poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA) and/or poly(ethyl acrylate) (PEtA) with TiO₂ was studied. The processes of polymer formation-radical polymerization and sol-gel process for inorganic network —were achieved simultaneously. Due to a high reactivity of titanium isopropoxide (TIP) in the sol-gel process, a complexant comonomer, allyl acetoacetate (AlAcAc), was used. Covalent bonds between polymer and inorganic chains were obtained by addition of trialkoxysilane derivates with vinyl (VTES) or methacryloyl (MPTS) groups. The presence of TIP inhibits the radical polymerization of vinyl acetate (VAc). The PVAc-TiO₂ hybrids were produced by the sol-gel process of TIP in the presence of pre-obtained PVAc. Except for VTES and MPTS, trialkoxysilane derivates with methyl (MeTES), octyl (OTES) and phenyl (PTES) groups were used. The thermal stability of hybrids is strongly affected by TiO₂ presence and by the type of trialkoxysilane derivates. The thermal stability of PVAc hybrids decreases in the presence of TiO₂ inorganic network. The glass transition temperature of polymers increases in the presence of the inorganic network.     

含氯聚合物和乙烯-醋酸乙烯酯共聚物共混体系的红外光谱研究

关于氯化聚乙烯(CPE)或聚氯乙烯(PVC)与乙烯—醋酸乙烯酯共聚物(EVA)共混体系相容性的研究,已有不少报道,其中Coleman等人运用FTIR方法研究了含VA45％的EVA与CPE、PVC的共混体系,测定了该体系的低临界共溶温度(LCST)。一般认为,如果VA含量更低,由于EVA本身的结晶,共混体系将变得难以     

间苯二胺、间氨基酚与间苯二酚混合液的萃取分离

在不同的酸碱条件下,分别以正丁醇(BuOH)、醋酸正丁酯(BuAc)及甲基异丁基甲酮(MIBK)作为萃取剂,对间苯二胺、间氨基酚及间苯二酚的水溶液混合体系进行萃取分离研究.HPLC分析实验结果表明:随着混合水溶液中H+浓度的增加,分离出间苯二酚的效果增强;而随着混合水溶液中OH-浓度的增加,分离间苯二胺的效果将大大增强;作为萃取剂,醋酸正丁酯和甲基异丁基甲酮优于正丁醇,能对水溶液混合体系中的三组分进行完全有效的分离,其中以甲基异丁基甲酮萃取效果最好.实验得到的最佳分离条件是:萃取剂为甲基异丁基甲酮,混合溶液中n(H+)/n(-NH2)≥1.32∶1时,萃取相中仅有间苯二酚;混合溶液中n(OH-)/n(-OH)≥1.11∶1时,萃取相中仅有间苯二胺.     

Selective Acetylation of Alcohols and Amines with Ethyl Acetate in the Presence of H<Subscript>6</Subscript>[PMo<Subscript>9</Subscript>V<Subscript>3</Subscript>O<Subscript>40</Subscript>] as the Catalyst

Summary. Acetylation of various alcohols and benzyl amine was tested in the presence of H₆[PMo₉V₃O₄₀], a mixed addenda heteropolyacid, in ethyl acetate under reflux condition. Phenols and anilines are not affected under the reaction conditions. Selective transestrification of alcohols can be achieved in the presence of phenol and aniline derivatives using this method.     

Spectrothermal investigation of the decomposition course of lanthanum acetate hydrate

Thermogravimetry, differential thermal, X-ray diffraction and infrared spectroscopy analyses showed La(CH₃COO)₃·1.5H₂O to decompose completely at 700°C yielding La₂O₃. The results revealed that the compound dehydrates in two steps at 130 and 180°C, and recrystallizes at 210°C. Water thus produced hydrolyzes surface acetates (at 310°C), releasing acetic acid into the gas phase. At 334°C, the anhydrous acetate releases gas phase CH₃COCH₃ to give La₂(CO₃)₃ residue, which decomposes to La₂O₂(CO₃) via the intermediate La₂O(CO₃)₂. On further heating up to 700°C, La₂O₃ is formed. IR spectroscopy of the gaseous products indicated a chemical reactivity at gas/solid interfaces formed throughout the decomposition course. As a result, CH₃COCH₃ was involved in a surface-mediated, bimolecular reaction, releasing CH₄ and C₄H₈ (isobutene) into the gas phase. Non-isothermal kinetic parameters, the rate constantk, frequency factorA, and activation energy ΔE, were calculated on the basis of temperature shifts experienced in the thermal processes encountered, at various heating rates (2–20 deg·min^?1).     

水合醋酸铈直接热分解制备超细氧化铈及其抛光性能

Ultra fine ceria was prepared by calcining hydrate cerium acetate. The effects of pyrolysis temperature on the particle size, morphology, specific surface area and loose packing density of ceria were investigated, and the removal rate of optical glasses polishing by ceria was determined. The results show that with the increase of pyrolysis temperature, the loose deposit density and crystallinity increases and the specific surface area decreases, however, the particle size decreases firstly and then increases, the minimum medium particle size D₅₀ is 0.47 μm at pyrolysis temperature of 1 000 ℃. The SEM images of ceria prepared by the decomposition at 800 ℃ or at 1 100 ℃ show porous powders or quasi-sphere small particles with loosely agglomeration, respectively. It was found that the removal rate varied with pyrolysis temperature in preparation of ceria and the property of glass polished. The removal rate for three kinds of glasses was in the order of ZF7> F1> K9, and the maximum value appeared at around 1 000 ℃ for ZF7 and F1, and at around 1 100 ℃ for K9.     

Mercury(II) mediated cyclisation of R-1-(1′-hydroxyethyl)-2-(1″-propenyl)-3-alkoxy-4-methoxybenzenes to chiral isochromanes

A protocol has been established for the transformation of chiral ortho 1-hydroxyethyl propenyl benzenes under both anaerobic and oxidative mercury(II) mediated conditions to produce chiral isochromanes. Further transformations of the former products yielded chiral isochromanquinones, while the latter afforded the corresponding chiral 4-hydroxyisochromanquinones.     

SO42-促进的中孔含锆分子筛催化合成乙酸松油酯的研究

合成了中孔含锆分子筛Zr-MCM-41，用H2SO4对Zr-MCM-41进行修饰，得到SO4^2-促进的中孔含锆分子筛SO4^2-／Zr-MCM-41．通过XRD、FT—IR表征了其结构．结果表明：Zr—MCM-41和SO4^2-／Zr—MCM-41具有中孔分子筛的特征结构、良好的长程有序性和结晶度；SO4^2-已进入Zr—MCM-41骨架内部，并与骨架原子形成了化学键，从而产生强酸中心，将SO4^2-／Zr—MCM-41用于催化合成乙酸松油酯，考察了催化剂的种类、反应温度、反应时间及反应物配比对松油醇酯化反应结果的影响．