Study of migration of active components of phosphorescent oxygen sensors for food packaging applications

A study of migration of the active components of oxygen sensors into food is presented. Six types of sensors, based on different oxygen sensitive dyes (two metalloporphyrins and one ruthenium dye), polymers (polystyrene and polysulfone) and support materials, were exposed to a number of standard ‘food simulants’ recommended by FDA/EU guidelines and then assayed for migration or sensor components and changes in oxygen calibration. Both metalloporphyrin sensor dyes leached only in olive oil and in 95% ethanol (used as a positive control), at maximum levels of 19.22 μg/dm² for PtOEPK and 113.96 μg/dm² for PtTFPP. The RuDPP dye showed maximum leaching in 95% ethanol (25.19 μg/dm²) while also migrating in an acidic aqueous simulant. Planar supports such as polyester tended to enhance the stability of the sensor. Migration of the styrene monomer from the polystyrene encapsulation medium was concluded to be low enough to be insignificant. Migration of sensor components was shown to correlate with the changes in sensor response to oxygen. Based on these results, sensor combinations were ranked on the basis of their resistance to leaching and their general stability, safety and suitability for use on a large scale in packaged foods and related food applications was proven.     

Resolution of enantiomers by HPLC on cellulose derivatives

Summary Various polysaccharide derivatives, particularly cellulose derivatives, were synthesized and used as chiral stationary phases for optical resolution by HPLC after being adsorbed on macroporous silica gel. Cellulose triacetate (CTA-II), which was synthesized under homogeneous conditions, showed a chiral recognition ability for many racemates. Other cellulose derivatives such as cellulose tribenzoate (OB), cellulose-trisphenylcarbamate (OC), cellulose tribenzyl ether (OE), and cellulose tricinnamate (OK) also showed unique chiral recognition. Among other polysaccharide derivatives, curdlan triacetate was also exhibited an effective chiral recognition. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

胆甾液晶／聚合物多组分体系的结构与性能研究（Ⅲ）──ChN／poly（MMA－CO－BMA）混合体系的形态结构

应用Ｘ射线衍射、偏光显微镜及电子显微镜研究了胆甾液晶与甲基丙烯酸甲酯（ＭＭＡ）─甲基丙烯酸丁酯（ＢＭＡ）无规共聚物共混体系的形态结构。研究了体系的结晶态及液晶态的行为和共聚物含量及组成对光学织构的影响。     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.     

Synthesis, Structure and Optical Properties of Cerium(Ⅲ) Triphosphate CeP3O9

The single crystal and crystallized powder of triphosphate CeP3O9 have been synthesized, and the space group of CeP3O9 has been determined to be C2221 with the cell parameters ofa = 8.6059, b = 11.2437, c = 7.3518 (A), V= 711.4(3) (A)3, Z= 4, Dc = 3.520 g/cm3, F(000) = 700,R = 0.0377 and wR = 0.0930. The absorption and emission spectra have been measured, for which the strongest absorption and emission peaks are located at 280 and 320 nm, respectively. The density of state (DOS) and dielectric function have been calculated by the DFT method. The crystal is transparent provided the wavelength is larger than 341 nm, and the observed ultraviolet cut-off edge is at about 350 nm for a polycrystalline power sample. It is possible that the triphosphate CeP3O9 will become an ultraviolet emission material.     

Molecular weight effect on the photoinduced birefringence and surface relief gratings formation of a methacrylate azopolymer

Samples of a methacrylic side-chain azopolymer were synthesized by a radical copolymerization of methyl-methacrylate with the methacrylic derivative of the commercial dye Disperse Red-13 (DR13). Copolymers with different molecular weight were obtained by varying the reaction time and the concentration of initiator. Samples with molecular weight averages (M_w) from 3 to 8 × 10⁴ g/mol and 1.4-1.7 polydispersity were obtained. The glass transition temperature of the samples increased linearly from the lower to the highest molecular weight. Optical quality cast films were prepared for all samples and photoinduced birefringence was successfully carried out in all samples as well as surface relief gratings could be inscribed in the cast films.     

5,6—二亚甲基双环[2.2.1]庚—2—醇及其衍生物的旋光与构型

从（－）－（１Ｓ，２Ｒ，４Ｓ）－５，６－二亚甲基双环［２．２．１］庚－２－醇（Ｉ）和（－）－（１Ｓ，２Ｓ，４Ｓ）－５，６－二亚甲基双环［２．２．１］庚－２－醇（Ⅱ）出发，合成了它们的醚类和取代苯甲酸酯类光学纯的衍生物。通过［α］Ｄ测定和构型分析，发现它们是含有３个手性碳（Ｃ１，Ｃ２和Ｃ４）的桥环化合物，其旋光性与构型的关系均符合可极化度多级圆球不对称性模型。     

JD树脂刻蚀及涂层的XPS研究

ＪＤ光学树脂表面刻蚀过程的ＸＰＳ研究表明，引进树脂遥ＣＯＨ，Ｃ＝Ｏ，Ｃ－ＳＯ３Ｈ，ＣＯＯＨ等基因随刻蚀温度的提高或时间的延长而增加，对其相对含量进行了计算，固化后的耐磨涂层具有ＳｉＯ２结构，ＪＤ板材的最佳刻蚀条件为２０℃，２０ｍｉｎ。     

Molecular structure and nanosecond optical limiting property of a typical silver cubane-like cluster containing tetraselenotungstate

A typical silver cubane-like heteroselenometallic cluster, (μ₃-WSe₄)Ag₃(PPh₃)₃Cl·0.5SePPh₃, was synthesized from reaction of [Et₄N]₂[WSe₄] and Ag(PPh₃)₂(NO₃) in CH₂Cl₂ solution and structurally characterized by X-ray crystallography. The compound crystallizes in the trigonal space group R3 with a=16.258(4), b=22.80(3) Å, V=5217(7) ų, and Z=3. The structure contains a strongly distorted cubane-like {WAg₃Se₃Cl} core. The coordination geometries of the W center and each Ag atom are tetrahedral. The mean W-Ag separation is 3.010(3) Å. Optical nonlinearity of this cubane-like cluster was studied. Large optical limiting effect with threshold of 0.45 J/cm² was observed with the laser pulses of 7 ns at 532 nm.     

LLDPE/纳米SiO_2复合材料的力学性能和光学性能研究

采用熔融共混方法制备了LLDPE 纳米SiO2 复合材料 ,并对该体系的力学性能和光学性能进行了系统研究 .结果表明 ,随着纳米SiO2 的加入 ,复合材料的弹性模量显著提高 ,冲击强度与拉伸强度呈峰形变化 ,且均在SiO2 含量为 3phr左右达到最大值 .加入少量的纳米SiO2 后 ,复合材料薄膜对长波红外线 (7～ 1 1 μm)的吸收能力较LLDPE膜有了显著提高 ,透光率略有下降但雾度提高 ,透光质量得到改善 .同时表明 ,纳米SiO2 的表面处理方法对膜的光学性能有显著影响