DSB显著提高羧酸盐驱油体系抗钙镁离子能力的研究

测定了工业品级的天然混合长链烷基羧酸盐(SDC)以及与3-(N,N-二甲基十二烷基胺)-2-羟基-丙磺酸(DSB)复配驱油体系的界面张力(ITFmin), 分别得出其抗钙镁离子的能力为400和5000 mg/L. 选择试剂级十二烷基羧酸钠与DSB复配, 测定了不同配比溶液的表面张力值和临界胶束浓度cmc, 结合长链烷基脂肪酸与钙离子的溶度积Ksp, 分析了对不溶性长链烷基羧酸盐形成的影响. 根据现场驱油体系配方, 计算了两者在溶液中的摩尔配比为4:1时的十二烷基羧酸盐在胶束中的摩尔分数xm1为0.51, 相互作用参数βm值为-3.11, 反映了两者有较强的相互作用. 采用量子化学方法, 对由1个十二烷基羧酸分子、1个DSB分子及1个二价钙离子组成的模型复合物进行了能量计算和电荷分布计算, 得出在长链烷基羧酸盐和DSB两者混合胶束的界面层中存在负电荷空穴, 提出二价金属离子被络合的模型, 合理地解释了实验事实.     

Polarization Dependence of a Hydrophobized Electrode for Electrosynthesis of a Soluble Product

An equation for a polarization curve of a hydrophobized electrode is proposed for electrosynthesis of a soluble electroactive product in an inner-kinetic mode. The equation contains the concentration of the target product (TP) in an explicit form. The shape of the curve depends on the biquadratic root of the TP concentration and the square root of the ratio between exchange currents of the side and target reactions.     

Conductance studies in amide-water mixtures. II. Sodium salts inN,N-dimethylformamide-water mixtures at 35°C

Conductance data for sodium nitrite, chloride, and acetate in water andN,N-dimethylformamide (DMF)-water mixtures (74.82D42.48) for the concentration range 0.001–0.04N, as well as the densities, viscosities, and dielectric constants of the solvent mixtures at 35°C, are reported. The data have been analyzed by the Fuoss (1975) equation. The existence of a maximum in the viscosity at a 13 mole ratio of DMF and water is indicated. The Walden products for all the three salts pass through a maximum while the equivalent conductances show a minimum with increasing DMF content. The maxima in the Walden product are attributed to the dehydration of ions by the cosolvent (DMF).Part I:Indian J. Chem. 14A, 1015 (1976).Deceased.     

Total synthesis of the marine alkaloid halitulin

The structure of the strongly cytotoxic marine alkaloid halitulin (1) has been confirmed by total synthesis and its absolute configuration determined as (15S). The synthesis follows a strategy previously reported by one of us and uses an efficient preparation of the quinoline-7,8-diol unit by modified Baeyer-Villiger and Skraup reactions. The O-benzyl protecting groups were removed in the last step of the synthesis by transfer hydrogenolysis without concomitant reduction of the quinoline ring. The method can be applied for the synthesis of halitulin analogues.     

Shape analysis based critical Eotvos numbers for buoyancy induced partial detachment of oil drops from hydrophilic surfaces

Removal of oil drops from solid surfaces immersed in an aqueous medium is of interest in many applications. It has been shown that drop shape analysis can be used to predict conditions at which the stability limit of a lighter than water oil drop on a solid surface immersed in an aqueous bath is reached (Adv. Colloid Interface Sci. 98 (2002) 265). However the above analysis is restricted to cases where the contact angle made by the drop is below 90degrees and when the surface conditions result in a 'pinned' contact line. In this paper, it is shown that drop shape analysis can be used to predict the critical conditions at which drop stability limit is reached for drop contact angles of 90degrees and above, which is encountered with 'hydrophilic' surfaces. This critical condition can predict the occurrence of partial oil drop detachment, before complete removal due to 'roll-up', which occurs when the hydrophilic surface is adequately smooth which prevents 'pinning' of the contact line. The critical conditions at which partial drop detachment occurs can also be approximately predicted from simple force balances. It has been shown (Adv. Colloid Interface Sci. 98 (2002) 265) that for contact angles less than 90degrees, the critical limit based on shape analysis appears to resolve the differences that arise due to alternate expressions for capillary retention force. This paper shows that even for contact angles above 90degrees, the critical conditions predicted from the shape analysis resolves the differences in the predictions from the alternate force balances. Drop shape analysis used in this paper is based on the 'Arc-length' form of Young-Laplace or 'drop shape' equation, which is different from the 'Y vs X' form of the above equation that is used in Adv. Colloid Interface Sci. 98 (2002) 265. The above drop shape equation is solved by a fourth order Runge-Kutta technique and it is shown that for angles less than 90degrees, the two forms of the drop shape equation, predict almost identical values of the critical Eotvos number. This paper highlights the competing effects of interfacial tension lowering induced drop instability and 'roll-up', a term that is used to describe the retraction of the contact line of an oil drop on a surface, in being the primary c ause for drop detachment.     

Contravariant forms and extremal projectors

Tensor product of irreducible modules of highest weight over a semi-simple quantum group is completely reducible if and only if a natural contravariant form is non-degenerate when restricted to the span of singular vectors. We express this restriction through the extremal projector of the quantum group providing a computationally feasible criterion for complete reducibility of tensor products.     

Infinite lexicographic products

We generalize the lexicographic product of first-order structures by presenting a framework for constructions which, in a sense, mimic iterating the lexicographic product infinitely and not necessarily countably many times. We then define dense substructures in infinite products and show that any countable product of countable transitive homogeneous structures has a unique countable dense substructure, up to isomorphism. Furthermore, this dense substructure is transitive, homogeneous and elementarily embeds into the product. This result is then utilized to construct a rigid elementarily indivisible structure.     

考虑大数据营销和风险规避的绿色供应链决策与协调

通过建立考虑大数据营销及零售商风险规避的博弈模型,对绿色供应链定价、产品绿色度及利润进行比较分析。研究发现:无论集中决策、双方风险中性分散决策还是仅零售商风险规避分散决策,考虑大数据营销时的供应链整体期望利润和产品绿色度较高,且大数据营销效率因子对产品绿色度的增加有正向作用;双方风险中性分散决策下,一定条件下,两部定价契约能够有效协调供应链整体利润,实现帕累托改进;仅零售商风险规避分散决策下,零售商的风险规避行为会降低其对大数据营销的投入,一定条件下,两部定价契约也能够实现供应链整体期望利润的帕累托改进。     

汽车制造商分时租赁模式采用及产品线策略研究

考虑自有平台和第三方平台两种分时租赁方式,将汽车质量划分为性能质量和环境质量,构建销售模式、纯分时租赁模式和混合模式下的产品线策略模型,研究制造商产品线策略与商业模式之间的相互作用。研究发现,同品牌产品间竞争和合并效应是分时租赁模式影响产品线策略的两个关键因素。同品牌产品间竞争的加剧和合并效应的增大都会激励企业选择性能更好的车型而忽略其环境表现。分时租赁模式能同时改进利润与产品环境表现,但存在条件:当消费者价格敏感性较低时,使用成本高且合并效应小是实现同时改进的条件;当消费者价格敏感较高时,使用成本低且合并效应小则是同时改进的条件。     

竞争市场下考虑再制造产品售后服务的供应链运营策略

在同时生产新产品和再制造产品的原始制造企业(企业1)与生产具有替代性产品的企业(企业2)构成竞争关系下的供应链系统中,探讨供应链在不同售后服务策略下供应链的运营策略,分析在竞争市场下供应链定价策略和再制造产品的售后服务对定价策略及供应链中各企业利润的影响。揭示再制造产品售后服务对定价策略和供应链各企业最优利润的影响。得到如下主要研究结论:(1)当制造企业为再制造产品提供售后服务时,再制造产品销售量增加,新产品和竞争替代产品销售量降低;有趣的是新产品和再制造产品的市场零售价格同时增加,竞争替代产品的市场零售价格降低。(2)制造企业为再制造产品提供售后服务时的利润总是大于没有售后服务时的利润,且不受单位产品生产成本影响。同时当单位产品生产成本较高时,制造企业为再制造产品提供售后服务策略会带来竞争对手企业利润增加。这些结论对具有再制造产品供应链如何提供再制造产品售后服务具有一定指导作用和管理启示。