ZnO Nanoparticles as an Efficient,Heterogeneous, Reusable,and Ecofriendly Catalyst for One-Pot,Three-Component Synthesis of 3,4-Dihydropyrimidin-2(1H)-(thio)one Derivatives in Water

An extremely efficient heterogeneous protocol is reported for the one-pot, three-component synthesis of a series of dihydropyrimidinones (DHPMs) in the presence of ZnO nanoparticles in water as a green solvent. The ZnO nanoparticles exhibited excellent catalytic activity and the proposed methodology is capable of providing the desired products in good yields (65–94%) within short reaction times. After the reaction course, ZnO nanoparticles can be recycled and reused without any apparent loss of activity, which makes this ecofriendly process cost-effective.     

Effect of the Spherical Silica Surface on the Photoluminescence of the Loaded CdS Nanoparticles

CdS nanoparticles were formed on the surface of silica microspheres by the improved layer‐by‐layer self‐assembled technique. High‐resolution electron microscope (HRTEM) image and energy dispersive x‐ray analysis (EDX) confirmed formation of a quasi‐continuous CdS nanoparticles film on the silica microspheres. The results of UV‐vis and fluorescence spectra display that the spherical silica surface has a great effect on the photoluminescence of the loaded CdS nanoparticles. In contrast to the CdS nanoparticles powder, the composite can exhibit the emission ascribed to the band gap transition when the CdS nanoparticles film is relatively thick. This phenomenon is probably due to an enhancement of the crystallinity of CdS nanoparticles induced by the silica spheres.     

Photocatalytic Activity of Nanocomposites of ZnO and Multi-Walled Carbon Nanotubes for Dye Degradation

Nanocomposites of ZnO and multi-walled carbon nanotubes (MWNTs) were prepared via electrostatic interaction and in situ hydrothermal synthesis approaches. The ZnO/MWNTs nanocomposites display relatively higher photocatalytic activity than ZnO nanoparticles for the degradation of Rhodamine B. Therein, MWNTs, acting as a photogenerated electron acceptor, retard the recombination of photoinduced electron and hole. The experimental results show that the photocatalytic activity of the ZnO/MWNTs nanocomposites strongly depends on the synthetic route, which is probably due to the difference of surface states resulted from the different preparation processes.     

聚乳酸/氧化锌柱撑皂石纳米复合材料制备与性能及结构表征

通过微波水解法制备了ZnO柱撑皂石,并以其为加工助剂制备了聚乳酸(PLA)/ZnO柱撑皂石纳米复合材料.通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、对ZnO柱撑皂石及PLA/ZnO柱撑皂石纳米复合材料的结构进行了表征,并对其力学性能和热稳定性能进行了测试.微观结构分析表明,ZnO柱撑皂石呈现剥离状,并均匀分散在PLA基质中.力学性能研究表明0.3%ZnO柱撑皂石的加入有助于改善PLA复合材料的断裂伸长率.SEM分析表明PLA复合材料的断面发生明显改变,表现良好韧性;DSC结果显示纳米ZnO柱撑皂石可以降低复合材料的玻璃化转变温度、结晶温度,有助于提高PLA复合材料的结晶度,与XRD分析相吻合;热重分析表明ZnO柱撑皂石可以提高PLA复合材料的热稳定性.测试结果表明,ZnO柱撑皂石在PLA基质中起到了异相成核的作用,促进了PLA基质的结晶.     

Ag-Ag2Se共敏化ZnO花-棒异质结构的合成及其光电化学特性

采用水相法合成ZnO花-棒(ZFRs)有序阵列结构,同时利用离子交换法,制备Ag和Ag₂Se量子点共敏化光ZnO光阳极(AA-ZFRs)。通过扫描电子显微镜(SEM)、X射线粉末衍射(XRD)、X射线能量色散谱(EDS)和透射电子显微镜(TEM)等手段对样品进行了分析和表征,并测试其光电化学特性以及量子效应。结果表明,Ag-Ag₂Se共敏化ZnO花-棒三维有序结构对太阳光的吸收范围延展至近红外区(750 nm),并且在敏化层与ZnO基质界面形成异质结,有效的抑制光生电子-空穴对复合,增强光转换量子效应,从而提高光电化学性能,开路电压达到-0.77 V,短路电流为0.64 mA。     

Ag掺杂对n-ZnO纳米棒/p-GaN异质结结构和发光性能的影响

利用简单的水热合成法在p-GaN薄膜上制备了Ag掺杂的一维ZnO纳米棒（ZnO NRs）,并且研究了Ag掺杂对于ZnO NRs结构和形貌以及n-ZnO NRs/p-GaN异质结发光特性的影响。结果表明,不同Ag掺杂浓度的ZnO纳米棒截面均呈六边形的棒状结构,且纳米棒的取向垂直于衬底;XRD分析结果表明,随着Ag掺杂浓度的增加,ZnO纳米棒（0002）晶面的峰位向衍射角减小的方向移动,表明Ag⁺置换了ZnO晶格中的部分Zn²⁺后使其晶格常数略增加;随着Ag掺杂浓度的增加,ZnO纳米棒近带边发光峰发生一定的红移并且强度逐渐减弱,黄带发光峰逐渐增强,n-ZnO NRs/p-GaN异质结具有更好的传输效率。     

ZnO nanoparticles: a green efficient catalyst for the room temperature synthesis of biologically active 2-aryl-1,3-benzothiazole and 1,3-benzoxazole derivatives

A facile synthetic protocol for the synthesis of 2-aryl-1,3-benzothiazoles and 1,3-benzoxazoles has been demonstrated using ZnO nanoparticles as a mild and efficient heterogeneous catalyst. The reactions using ZnO nanoparticles were very fast (<8 min) and provided excellent yields (>90%) of the products. The catalyst was recycled and reused up to eight times without significant loss of catalytic activity. The potential application of 2-(4-hydroxyphenyl)-1,3-benzothiazole as new acid–base indicator has also been demonstrated in this Letter.     

ZnO纳米管有序阵列与Cu2O纳米晶核壳结构的光电化学性能及全固态纳米结构太阳电池研究简

采用电化学方法在铟锡氧化物(ITO)导电玻璃基底上制备了高度有序的ZnO纳米管阵列,然后在ZnO纳米管阵列上电化学沉积Cu2O纳米晶颗粒,获得了一维有序Cu2O/ZnO核壳式纳米阵列结构,通过控制Cu2O纳米晶的沉积电量得到不同厚度的Cu2O壳层,并对该核壳式纳米阵列的形貌和结构进行了分析. 以Cu2O/ZnO一维核壳式纳米阵列结构为光电极组装全固态纳米结构太阳电池,研究了Cu2O壳层厚度对光电极光吸收性能、光电性能以及组装电池光伏性能的影响,优化了电池中对电极材料的喷金厚度. 结果表明,以Cu2O沉积电量为1.5 C的Cu2O/ZnO为光活性层,以4 mA电流下真空镀金20~25 min的铜基底为对电极组装的简易太阳电池最高可获得0.013%的光电转换效率.     

ZnO纳米线基MWNTs/PVDF复合热电材料的制备及特性研究

将不同比例的多壁碳管(MWNTs)与聚偏二氟乙烯(PVDF)聚合物混合后,喷涂于n型ZnO半导体纳米线阵列上,制备了一种新型ZnO纳米线基MWNTs/PVDF热电复合材料.与以往采用价格昂贵的p型与n型单壁碳纳米管(SWNTs)与聚合物混合制备的复合热电材料特性相比,这种新型热电复合材料在降低制造成本的同时,利用分散于聚合物中MWNTs的一维电子传输特性及形成的大量界面势垒,加上ZnO半导体纳米线具有的较高载流子密度与迁移率,提高了复合热电材料中电子的输运特性,增加了材料对声子的散射强度.测试发现,在一定的温度梯度下,随着MWNTs添加质量百分比的增加,热电材料的温差电动势和电导率也随之增加,但其Seebeck系数变化量不大.研究表明,这种热电材料有望替代采用p型与n型SWNTs构建的SWNTs/PVDF复合热电材料.研究结果对开发超轻、无毒、廉价、可应用于各种微纳电子领域的新型电源具有重要的参考价值.