A Frustrated Phosphane–Borane Lewis Pair and Hydrogen: A Kinetics Study

The energy profile of a frustrated Lewis pair (FLP) dihydrogen splitting system was determined by a combined experimental kinetic and DFT study. A trimethylene‐bridged phosphane–borane FLP was converted into its endothermic H₂‐cleavage product by sequential H⁺/H^? addition. The system could be handled at low temperature, and the kinetics of the H₂ elimination were determined to give a rate constant of k_HH,exp(299 K)=(2.87±0.1)×10^?4 s^?1 in solution. The primary kinetic isotope effects were determined; for example, (k_HH/k_DD)_exp=3.19. The system was accurately analyzed by DFT calculations.     

WENO schemes applied to the quasi-relativistic Vlasov–Maxwell model for laser–plasma interaction

In this paper we focus on WENO-based methods for the simulation of the 1D Quasi-Relativistic Vlasov–Maxwell (QRVM) model used to describe how a laser wave interacts with and heats a plasma by penetrating into it. We propose several non-oscillatory methods based on either Runge–Kutta (explicit) or Time-Splitting (implicit) time discretizations. We then show preliminary numerical experiments.     

Enhancement of Photocatalytic Activity for Hydrogen Production by Surface Modification of Pt-TiO2 Nanoparticles with a Double Layer of Photosensitizers

To investigate the effect of the surface structure of dye-sensitized photocatalyst nanoparticles, we prepared three types of Ru^II-photosensitizer (PS)-double-layered Pt-cocatalyst-loaded TiO₂ nanoparticles with different surface structures, Zr- RuCP⁶ -Zr- RuP⁶ @N wt %Pt-TiO₂, RuCP⁶ -Zr- RuP⁶ @N wt %Pt-TiO₂, and RuCP² -Zr- RuP⁶ @N wt %Pt-TiO₂ (N=0.2, 1, and 5), and evaluated their photocatalytic H₂ evolution activity in the presence of redox-reversible iodide as the electron donor. Although the driving force of the electron injection from I⁻ to the photo-oxidized Ru^III PS is comparable, the activity increased in the following order: RuCP² -Zr- RuP⁶ @1 wt %Pt-TiO₂ < RuCP⁶ -Zr- RuP⁶ @1 wt %Pt-TiO₂ < Zr- RuCP⁶ -Zr- RuP⁶ @1 wt %Pt-TiO₂. The apparent quantum yield of Zr- RuCP⁶ -Zr- RuP⁶ @1 wt %Pt-TiO₂ in the first hour reached 1 %. Zeta-potential measurements suggest that the surface Zr⁴⁺-phosphate groups attracted I⁻ anions to the nanoparticle–solution interface. Our results indicate that the surface modification of dye-sensitized photocatalysts is a promising approach to enhance photocatalytic activity with various redox mediators.     

Activation of α-Fe2O3 for Photoelectrochemical Water Splitting Strongly Enhanced by Low Temperature Annealing in Low Oxygen Containing Ambient

Photoelectrochemical (PEC) water splitting is a promising method for the conversion of solar energy into chemical energy stored in the form of hydrogen. Nanostructured hematite (α-Fe₂O₃) is one of the most attractive materials for a highly efficient charge carrier generation and collection due to its large specific surface area and the short minority carrier diffusion length. In the present work, the PEC water splitting performance of nanostructured α-Fe₂O₃ is investigated which was prepared by anodization followed by annealing in a low oxygen ambient (0.03 % O₂ in Ar). It was found that low oxygen annealing can activate a significant PEC response of α-Fe₂O₃ even at a low temperature of 400 °C and provide an excellent PEC performance compared with classic air annealing. The photocurrent of the α-Fe₂O₃ annealed in the low oxygen at 1.5 V vs. RHE results as 0.5 mA cm⁻², being 20 times higher than that of annealing in air. The obtained results show that the α-Fe₂O₃ annealed in low oxygen contains beneficial defects and promotes the transport of holes; it can be attributed to the improvement of conductivity due to the introduction of suitable oxygen vacancies in the α-Fe₂O₃. Additionally, we demonstrate the photocurrent of α-Fe₂O₃ annealed in low oxygen ambient can be further enhanced by Zn-Co LDH, which is a co-catalyst of oxygen evolution reaction. This indicates low oxygen annealing generates a promising method to obtain an excellent PEC water splitting performance from α-Fe₂O₃ photoanodes.     

Multimetallic Oxynitrides Nanoparticles for a New Generation of Photocatalysts

A versatile synthetic strategy for the preparation of multimetallic oxynitrides has been designed and here exemplarily discussed considering the preparation of nanoscaled zinc–gallium oxynitrides and zinc–gallium–indium oxynitrides, two important photocatalysts of new generation, which proved to be active in key energy related processes from pollutant decomposition to overall water splitting. The synthesis presented here allows the preparation of small nanoparticles (less than 20 nm in average diameter), well-defined in size and shape, yet highly crystalline and with the highest surface area reported so far (up to 80 m² g⁻¹). X-ray diffraction studies show that the final material is not a mixture of single oxides but a distinctive compound. The photocatalytic properties of the oxynitrides have been tested towards the decomposition of an organic dye (as a model reaction for the decomposition of air pollutants), showing better photocatalytic performances than the corresponding pure phases (reaction constant 0.22 h⁻¹), whereas almost no reaction was observed in absence of catalyst or in the dark. The photocatalysts have been also tested for H₂ evolution (semi-reaction of the water splitting process) with results comparable to the best literature values but leaving room for further improvement.     

Synergism of Interface and Electronic Effects: Bifunctional N-Doped Ni3S2/N-Doped MoS2 Hetero-Nanowires for Efficient Electrocatalytic Overall Water Splitting

The realization of water electrolysis on the basis of highly active, cost-effective electrocatalysts is significant yet challenging for achieving sustainable hydrogen production from water. Herein, N-doped Ni₃S₂/N-doped MoS₂ 1D hetero-nanowires supported by Ni foam (N-Ni₃S₂/N-MoS₂/NF) are readily synthesized through a chemical transformation strategy by using NiMoO₄ nanowire array growth on Ni foam (NiMoO₄/NF) as the starting material. With the in situ generation of Ni₃S₂/MoS₂ heterointerfaces within nanowires and the incorporation of N⁻ anions, an extraordinary hydrophilic nature with abundant, well-exposed active sites and optimal reaction dynamics for both oxidation and reduction of water are obtained. Attributed to these properties, as-converted N-Ni₃S₂/N-MoS₂/NF exhibits highly efficient electrocatalytic activities for both hydrogen and oxygen evolution reactions under alkaline conditions. The superior bifunctional properties of N-Ni₃S₂/N-MoS₂/NF enable it to effectively catalyze the overall water-splitting reaction.     

Advantageous Interfacial Effects of AgPd/g-C3N4 for Photocatalytic Hydrogen Evolution: Electronic Structure and H2O Dissociation

Bimetallic AgPd nanoparticles have been synthesized before, but the interfacial electronic effects of AgPd on the photocatalytic performance have been investigated less. In this work, the results of hydrogen evolution suggest that the bimetallic AgPd/g-C₃N₄ sample has superior activity to Ag/g-C₃N₄ and Pd/g-C₃N₄ photocatalysts. The UV/Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, CO adsorption diffuse reflectance FTIR spectroscopy, and FTIR results demonstrate that in the AgPd/g-C₃N₄, the surface electronic structures of Pd and Ag are changed, which is beneficial for faster photogenerated electron transfer and greater H₂O molecule adsorption. In situ ESR spectra suggest that, under visible light irradiation, there is more H₂O dissociation to radical species on the AgPd/g-C₃N₄ photocatalyst. Furthermore, DFT calculations confirm the interfacial electronic effects of AgPd/g-C₃N₄, that is, Pd^δ−⋅⋅⋅Ag^δ+, and the activation energy of H₂O molecule dissociation on AgPd/g-C₃N₄ is the lowest, which is the main contributor to the enhanced photocatalytic H₂ evolution.     

Ln0.5A0.5MnO3 (Ln=Lanthanide,A= Ca,Sr) Perovskites Exhibiting Remarkable Performance in the Thermochemical Generation of CO and H2 from CO2 and H2O

Perovskite oxides of the Ln_0.5A_0.5MnO₃ (Ln=lanthanide, A=Sr, Ca) family have been investigated for the thermochemical splitting of H₂O and CO₂ to produce H₂ and CO respectively. The amounts of O₂ and CO produced strongly depend on the size of the rare earth ions and alkaline earth ions. The manganite with the smallest rare earth possessing the highest distortion and size disorder as well as the smallest tolerance factor, gives out the maximum amount of O₂, and, hence, the maximum amount of CO. Thus, the best results are found with Y_0.5Sr_0.5MnO₃, which possesses the highest distortion and size disorder. Y_0.5Sr_0.5MnO₃ shows remarkable fuel production activity even at the reduction and oxidation temperatures as low as 1200 °C and 900 °C, respectively.     

Blue TiO2 nanotube arrays as semimetallic materials with enhanced photoelectrochemical activity towards water splitting

In the past years there has been a great interest in self-doped TiO₂ nanotubes (blue TiO₂ nanotubes) compared to undoped ones owing to their high carrier density and conductivity. In this study, blue TiO₂ nanotubes are investigated as photoanode materials for photoelectrochemical water splitting. Blue TiO₂ nanotubes were fabricated with enhanced photoresponse behavior through electrochemical cathodic polarization on undoped and annealed TiO₂ nanotubes. The annealing temperature of undoped TiO₂ nanotubes was tuned before cathodic polarization, revealing that annealing at 500 °C improved the photoresponse of the nanotubes significantly. Further optimization of the blue TiO₂ nanotubes was achieved by adjusting the cathodic polarization parameters. Blue TiO₂ nanotubes obtained at the potential of –1.4 V (vs. SCE) with a duration of 10 min exhibited twice more photocurrent response (0.39 mA cm^-2) compared to the undoped TiO₂ nanotube arrays (0.19 mA cm^-2). Oxygen vacancies formed through the cathodic polarization decreased charge recombination and enhanced charge transfer rate; therefore, a high photoelectrochemical activity under visible light irradiation could be achieved.