基于Karhunen-Loève变换和小波谱特征矢量量化的三维谱像数据压缩

提出了基于Karhunen Lo埁ｖｅ变换的小波谱特征矢量量化三维谱像数据压缩方法耍幔颍瑁酰睿澹?Lo埁ｖｅ变换 /小波变换 /小波谱特征矢量量化方法应用了Karhunen Lo埁ｖｅ变换的消除谱相关性优良性能 ,应用二维小波变换消除空间相关性 ,在小波变换域内应用二维集分割嵌入块编码和一维谱特征矢量量化对三维谱像数据压缩 ,获得较高的压缩性能。实验结果表明 :Karhunen Lo埁ｖｅ变换 /小波变换 /小波谱特征矢量量化编码比Karhunen Lo埁ｖｅ变换 /小波变换 /改进对块零树编码和Karhunen Lo埁ｖｅ变换 /小波变换 /快速矢量量化编码方法在同样压缩比条件下 ,峰值信噪比提高 2dB和 1dB以上 ,而速度提高了 1.5和 8倍 ,整体压缩性能有较大的提高     

A new joint model for longitudinal and survival data with a cure fraction

We develop a new joint cure rate model for longitudinal and survival data. The model allows for multiple longitudinal markers as well as a cure structure for the survival component based on the promotion time cure rate model, as described in Ibrahim et al. (Bayesian Survival Analysis, Springer, New York, 2001). Several characteristics and properties of the new model are discussed and examined. A real dataset from a melanoma clinical trial is given to demonstrate the methodology.     

Coercive boundary value problems for regular degenerate differential-operator equations

This study focuses on nonlocal boundary value problems (BVP) for degenerate elliptic differential-operator equations (DOE), that are defined in Banach-valued function spaces, where boundary conditions contain a degenerate function and a principal part of the equation possess varying coefficients. Several conditions obtained, that guarantee the maximal L_p regularity and Fredholmness. These results are also applied to nonlocal BVP for regular degenerate partial differential equations on cylindrical domain to obtain the algebraic conditions that ensure the same properties.     

The spectrum of cyclic BSA(ν, 3, λ; α) with α = 2, 3

Balanced sampling plans excluding contiguous units (or BSEC) were first introduced by Hedayat, Rao, and Stufken in 1988. In this paper, we generalize the concept of a cyclic BSEC to a cyclic balanced sampling plan to avoid the selection of adjacent units (or CBSA for short) and use Langford and extended Langford sequences to construct a cyclic BSA(ν, 3, λ; α) with α = 2, 3. We finally establish the necessary and sufficient conditions for the existence of a cyclic BSA(ν, 3, λ; α) where α = 2, 3. © 2005 Wiley Periodicals, Inc. J Combin Designs.     

Adsorption of argon and nitrogen in cylindrical pores of MCM-41 materials: application of density functional theory

Adsorption of argon and nitrogen at their respective boiling points in cylindrical pores of MCM-41 type silica-like adsorbents is studied by means of a non-local density functional theory (NLDFT), which is modified to deal with amorphous solids. By matching the theoretical results of the pore filling pressure versus pore diameter against the experimental data, we arrive at a conclusion that the adsorption branch (rather than desorption) corresponds to the true thermodynamic equilibrium. If this is accepted, we derive the optimal values for the solid-fluid molecular parameters for the system amorphous silica-Ar and amorphous silica-N₂, and at the same time we could derive reliably the specific surface area of non-porous and mesoporous silica-like adsorbents, without a recourse to the BET method. This method is then logically extended to describe the local adsorption isotherms of argon and nitrogen in silica-like pores, which are then used as the bases (kernel) to determine the pore size distribution. We test this with a number of adsorption isotherms on the MCM-41 samples, and the results are quite realistic and in excellent agreement with the XRD results, justifying the approach adopted in this paper.     

60keV质子辐照对TiNi记忆合金薄膜马氏体相变的影响

 利用磁控溅射的方法在氧化后的单晶Si基片上制备了TiNi形状记忆合金薄膜，利用示差扫描量热法和原位X射线衍射研究了薄膜的马氏体相变特征。通过60keV质子注入（辐照）薄膜样品研究了H+离子对合金薄膜马氏体相变特征的影响，结果表明氢离子注入后引起了马氏体相变开始Ms和结束点Mf以及逆马氏体相变开始As和结束温度Af的下降，而对R相变开始Rs和结束温度Rf影响不大。掠入射X射线衍射表明H+离子注入后有氢化物形成。H⁺离子注入形成的氢化物是引起相变点的变化的主要因素。     

利用计算机辅助装调检测矩形大口径离轴非球面的方法研究

通过非球面的零位补偿法,完成了对矩形大口径离轴非球面镜的检测。先用光学设计软件Zemax从理论上分析了在检测中会出现的现象,并结合计算机辅助装调技术,确定在检测过程中相对敏感的自由度,然后控制这些量,使补偿器和非球面的相对关系与理论设计相吻合,在Zygo相位干涉仪上测得最终结果。在λ=632.8nm时,中心圆口径与两个边缘圆口径面形误差RMS分别为0.022λ,0.037λ,0.032λ。检测结果,达到预期目的。     

CCD相机调制传递函数测试软件的研制

数学傅立叶分析法是测量调制传递函数常用的一种方法，为了迅速地给出采用该方法进行调制传递函数测试的结果，针对刀口扫描测试CCD相机调制传递函数的测试系统研制了测试软件。软件可读入CCD相机摄取的数字图像文件，对数据进行消噪声处理，并自动识别刀口位置，选择合适区域计算出相机的调制传递函数。软件采用VC语言编制，结果以列表和曲线两种形式输出，用户界面良好，使用方便。利用该软件得到的测试结果与俄罗斯软件的计算结果吻合较好。     

非球面最适球面的确定方法——三点法

根据非球面生产的实际情况．指出非球面最适球面的确定方法．详细分析最适球面的计算方法．并对一抛物面进行了实例计算，通过与最小二乘法的计算结果比较．指出该方法具有计算简单、与加工工艺过程相符合等特点。     

Synthesis of 4,6-disubstituted pyrimidines via Suzuki and Kumada coupling reaction of 4,6-dichloropyrimidine

A series of 4,6-disubstituted pyrimidines were synthesized via Suzuki and Kumada coupling reaction of 4,6-dichloropyrimidine.