Optimization of Microwave-Assisted Extraction (MAE) for the Isolation of Antioxidants from Basil (Ocimum basilicum L.) by Response Surface Methodology (RSM)

Abstract

The recovery of antioxidants from basil (Ocimum basilicum L.) was modeled with the aid of response surface methodology (RSM) using microwave-assisted extraction (MAE). Face-centered central design (FCCD) was employed to optimize the MAE operational parameters including the extraction time (1 to 7?min), extraction temperature (30 to 120?°C), solid-to-solvent ratio (0.1 to 0.4), and solvent concentration (20 to 80% ethanol, v/v), and to obtain the best possible combinations of these parameters for a high antioxidant yield from basil. The total antioxidant capacity (TAC) was expressed in trolox (TR) equivalents per gram of dried sample (DS). Three of the operational parameters (temperature, extraction time and solvent concentration) were shown to have significant effect on the extraction efficiency of antioxidants in basil extracts (p?<?0.05). The solvent concentration was shown to be the most significant factor on antioxidant yield obtained by MAE. There was a close relationship between experimental and predicted values using the proposed method. This optimized MAE method shows an application potential for the efficient extraction of antioxidants from basil in the food and pharmaceutical industries.     

Alkaline extraction in combination with microwave-assisted extraction followed by solid-phase extraction treatment for polycyclic aromatic hydrocarbons in a sediment sample

Microwave-assisted extraction using 1 M KOH/methanol (alkaline-MAE) in combination with solid-phase extraction treatment was developed and applied to polycyclic aromatic hydrocarbons (PAHs) in a sediment sample. Although various conditions were examined (100 or 150 °C for 10 or 30 min), comparable concentrations of PAHs to those obtained by conventional extraction with 1 M KOH/methanol at 70 °C for 4 h were obtained, even at 100 °C for 10 min. The concentrations obtained by using MeOH at 150 °C for 30 min without KOH were lower (by 1.3-37%) than those obtained by alkaline-MAE at 150 °C for 30 min. Since the developed technique can introduce higher concentration of benzo[ghi]perylene relative to those using pressurized liquid extraction (toluene, 150 °C, 15 MPa, 10 min, two cycles), the developed alkaline-MAE is a effective technique.     

Comparaison de différentes méthodes d'extraction d'acides dicaféoylquiniques à partir d'une plante halophile

The aim of this study is the evaluation of different extraction methods for dicaffeoylquinic acids (diCQA), previously identified by a LC-DAD-ESI-QTOF dereplication strategy from a halophyte plant rich in polyphenols. Three different eco-friendly extraction methods are tested: microwave-assisted extraction (MAE), pressurized fluid extraction (PFE), supercritical fluid extraction (SFE). Various specific parameters are optimized for each of them. Global extraction yields are calculated for all extracts. Moreover, the extracts are analyzed by HPLC–DAD–ELSD, and the obtained profiles are compared to estimate qualitatively and semi-quantitatively their composition. The practicality of each technique is also discussed. The results show that the various parameters tested for PFE and MAE do not drastically affect the extraction of our interest compounds. However, the parameters tested on SFE are more decisive, such as the addition of a modifier in CO₂, which allows the extraction of diCQA.     

Microwave extraction and rapid isolation of arjunic acid from Terminalia arjuna (Roxb. ex DC.) stem bark and quantification of arjunic acid and arjunolic acid using HPLC-PDA technique

Arjunic acid and arjunolic acid are main bioactive components of Terminalia arjuna stem bark and reported for various biological activities. In this study, microwave-assisted extraction (MAE) of arjunic and arjunolic acid from stem bark of T. arjuna was investigated with developed and validated HPLC-PDA method, which resulted in the isolation of a novel anticancer molecule i.e. arjunic acid. Effects of several experimental parameters, such as type and volume of extraction solvents, microwave power, microwave extraction time, on the extraction efficiencies of arjunic, and arjunolic acid from stem bark of T. arjuna were evaluated. The optimal extraction conditions identified were 5.0 g quantity of stem bark powder, 20 mL of ethyl acetate, preleaching time 10 min, microwave power 600 W, temperature 65°C, and microwave irradiation time 5 min. The results showed that MAE is a more rapid extraction method with higher yield and lower solvent consumptions than reported methods. The HPLC-PDA analysis method was developed and validated to have good linearity, precision, sensitivity, and accuracy. MAE-HPLC-PDA is a faster, convenient, and appropriate method for isolation and determination of arjunic acid and arjunolic acid in the stem bark of T. arjuna.     

Microwave-assisted Extraction of Rutin and Quercetin from Flos Sophorae

Three microwave-assisted extraction(MAE) procedures were studied. The first procedure was household microwave oven dynamic extraction(HMODE). The second procedure was special microwave oven bath extraction (SMOBE). The third procedure was microwave resonant cavity dynamic extraction (MRCDE). The results obtained by the three microwave-assisted extraction procedures were compared with those obtained by using traditional Soxhlet extraction. The results indicate that the MAE not only took a shorter time, but also simplified the procedure, and made the extraction a higher yield. At the same time the results obtained by the three MAE procedures were also compared with each other.     

Synthesis and structural elucidation of a phthalide analog using NMR analysis and DFT calculations

Phtalides are secondary metabolites found in several fungi with a wide range of biological activities. A novel phthalide analog was synthesized by Diels–Alder reaction between cyclopentadiene and 3,4-dichlorofuran-2(5H)-one. Quantum mechanical calculations were used in conjunction with the spectrometric methods to determine the structure of the title compound. The calculated NMR chemical shifts for eight candidate pairs of enantiomers were compared with the experimental NMR chemical shifts applying the DP4 probability and mean absolute errors methodology. DP4 analysis using ¹H and ¹³C NMR chemical shifts without assignment of the signals presented 100% probability for the correct candidate structure 3d , proving the consistency of the method even without spectra interpretation. Results from theoretical calculation and NMR spectra interpretation were in agreement to the structure of rac-(3aR,4S,4aS,5R,8S,8aR,9R,9aS)-3a,9a-dichloro-3a,4,4a,5,8,8a,9,9a-octahydro-4,9:5,8-dimethanonaphtho[2,3-c]furan-1(3H)-one.     

Determination of polychlorinated biphenyls in ash using dimethylsulfoxide microwave assisted extraction followed by solid-phase microextraction

A procedure for the determination of several coplanar and non coplanar PCBs in ash samples is described. Analytes were extracted from the samples using dimethylsulfoxide (DMSO) under the action of a microwave field, and then they were concentrated on a PDMS-DVB solid-phase microextraction (SPME) fibre using the headspace mode, after water dilution of the DMSO extract. Determinations were carried out using GC-ECD and GC-MS detection. Influences of microwave extraction (solvent volume, temperature and time) and SPME conditions (stirring, kind of SPME fibre, salt and water addition, sampling time and temperature) on the performance of the whole analytical procedure were systematically investigated. Working under optimal conditions quantification limits from 0.2 to 1.5 ng g⁻¹ were obtained for all the compounds, except for PCB 209, which could not be consistently extracted from the sample using the proposed conditions.     

Evaluation of a microwave-assisted extraction technique for determination of water-soluble inorganic species in urban airborne particulate matter

A simple and rapid microwave-assisted extraction (MAE) technique has been developed for the determination of water-soluble inorganic species (cations: Na⁺, NH₄⁺, K⁺, Ca²⁺ and Mg²⁺ and anions: F^–, Cl^–, NO₃^–, PO₄^3– and SO₄^2–) in airborne particulate matter. The analytes were extracted under different treatment conditions such as microwave power and extraction time. They were quantified using ion chromatography. The observed concentrations and recovery yields obtained under different conditions were compared. The results of a comparison between this MAE and sonication using NIST SRM 1648 are also given in this paper. The optimized MAE technique gave results in good agreement with the values obtained by the sonication. For some ions, for example Mg²⁺ and K⁺, recovery was low with both techniques. The results demonstrated that the optimized MAE is fast and efficient compared with conventional ultrasonic extraction. Urban airborne particles were collected and subjected to the MAE followed by the IC analysis to determine the relative proportions of different water-soluble inorganic species. These results are briefly discussed.     

微波辅助萃取/样品前处理联用技术的研究进展

微波辅助萃取是近年来新发展的一种样品前处理技术,随着微波辅助萃取的发展和成熟,它与其它样品前处理技术的联用得到了迅速发展。与传统前处理方法相比,这些联用方法具有快速、高效、操作简便、节省溶剂、选择性好、应用范围广的特点。该文综述了微波辅助萃取及其与其它样品前处理技术联用的特点及适用性,并对近年来微波辅助萃取与其它前处理方法联用的发展概况及在分析领域中的应用情况进行了详细总结。     

Fast miniaturised sample preparation for the screening and comprehensive two-dimensional gas chromatographic determination of polychlorinated biphenyls in sludge

Polychlorinated biphenyls (PCBs) in sludge are usually extracted by a technique such as Soxhlet with subsequent fractionation prior to long GC runs using GC-ECD or GC-HRMS. In this study, the extraction of selected chlorinated biphenyls (CBs) from a spiked sludge sample by three rapid techniques, i.e. ultrasonic (USE), pressurised-liquid (PLE), and microwave-assisted (MAE) extraction using a domestic microwave, was studied, with subsequent direct GC-ECD, GC-MS, or GC x GC-microECD analysis of the extracts. The main goal was to select an appropriate, and miniaturised, extraction method after only a brief optimisation and demonstrate the power of GC x GC analysis of dirty extracts. For PLE similar CB recoveries were found when extracting with either n-hexane or n-hexane/acetone (1/1). For USE and MAE, n-hexane/acetone (1/1) was the preferred extraction solvent. USE gave the best recoveries (80-95%; except 130% for CB 105). The only clean-up needed prior to GC-MS or GC x GC-gECD analysis was the removal of sulphur-containing compounds. GC-ECD was not suitable for these dirty extracts. The lowest LODs for the CBs (20 fg or 0.1 ng/g sludge) were found when combining USE and GC x GC-microECD, because of the powerful extraction, high separation power and excellent detectability provided by this technique.