机械球磨与反应烧结合成Sr2CeO4发光体的研究

Sr₂CeO₄ phosphor was synthesized by mechanical milling and reactive sintering in this work. The solid state reaction of SrCO₃and CeO₂ (2∶1) started at about 850 ℃ and completed at 1 000 ℃ for about 4 h. Two types of formation mechanism of Sr₂CeO₄ were proposed. When the starting powder mixture was fired above 1 000 ℃, the unstable intermediate phase SrCeO₃was developed, which then reacted with SrCO₃to form the final product Sr₂CeO₄, however, SrCO₃and CeO₂ converted directly to Sr₂CeO₄ at a lower temperature. The XRD results showed the crystal structure of Sr₂CeO₄ was orthorhombic. The emission spectra displayed a broad band with maximum at about 465 nm. The mechanical milling of starting power mixture and the sintering temperature had no effect on this emission spectra.     

铒离子及其阳离子卟啉配合物对金黄色葡萄球菌生长的抑制和刺激作用

用微量热法研究了Er³⁺、TMP{TMP=5，10，15，20-四(4-甲氧基苯基)卟啉}及其阳离子铒卟啉配合物[Er(TMP)(H₂O)₃]Cl对金黄色葡萄球菌生长作用的生物热动力学特征，求算了在Er³⁺、TMP和[Er(TMP)(H₂O)₃]Cl作用下，金黄色葡萄球菌生长的热动力学参数。实验结果表明：TMP对金黄色葡萄球菌生长的作用表现为单向的抑制作用，而Er³⁺和[Er(TMP)(H₂O)₃]Cl对金黄色葡萄球菌的生长有双向调节作用。在低浓度下，Er³⁺对金黄色葡萄球菌生长的刺激作用强于[Er(TMP)(H₂O)₃]Cl；在较高浓度下，[Er(TMP)(H₂O)₃]Cl对金黄色葡萄球菌生长的抑制作用显著强于Er³⁺。对金黄色葡萄球菌的抗菌活性为：[Er(TMP)(H₂O)₃]Cl>>TMP>Er³⁺。对相互作用机理做了初步探讨。     

4－（2－氨基噻唑）－间苯二酚为柱前衍化剂液相色谱／电化学检测Fe、Co、Ni

４－（２－氨基噻唑）－间苯二酚为柱前衍化剂液相色谱／电化学检测Ｆｅ、Ｃｏ、Ｎｉ格日勒，李惠梅，李南强，汪尔康（中国科学院长春应用化学研究所电分析化学开放实验室，北京大学化学系，长春，１３００２２）关键词液相色谱，Ｆｅ，Ｃｏ，Ｎｉ，４－（２－氨基噻唑）...     

吡啶—2,6—二羧酸体系导数荧光法同时测定铀,钐,铕,铽,镝

本研究了吡啶－２，６－二羧酸（ＤＰＡ）体系导数荧光法同时测定铀，钐，铕，铽，镝的最佳条件。在ｐＨ５．５，４．８×１０＾－＾５ｍｏｌ／ＬＤＰＡ，激发波长２７２ｎｍ的条件下，可分别在５１８，６３９，６２１，５３９和６６ｎｍ处测定铀，钐，铕，铽和镝，检测限分别达到７，０．４，０．００４，０．０２６和０．２５ｎｇ／ｍＬ。应用本法测定了混合成试液中上术五种离子含量，回收率为９２．３－１０８．１％。     

A Facile Synthesis of Ethyl 2,4-Dimethoxy-6-perfluoroalkyl-benzoates via Acyclic Precursors

Introduction Polysubstituted arenes are important intermediates in synthetic medicines and dyestuffs, and the fluorinated analogues are more attractive as a result of their lipo-philicity and the increment of activity.1,2 Therefore, to study the convenient and efficient synthesis of polysub-stituted arenes is valuable in organic synthetic method-ology. We have designed a simple synthesis of fluori-nated polysubstituted arenes through the intramolecular Wittig reaction of a new phosphorous ylid…     

CoOx改性TiO2光催化剂的制备、优化及其光催化分解水析氢性能研究

利用热分解法制备了不同掺杂量的CoO_x-TiO₂系列光催化剂, 并优化了制备方法。在用XRD、TEM和XPS等技术对催化剂表征的基础上，探讨了乙醇作为电子给体时CoO_x改性对P25-TiO₂光催化分解水析氢性能的影响。本文还利用连续瞬态电流-时间响应和循环伏安法等电化学方法，考察了CoO_x-TiO₂改性系列光催化剂光照条件下电流响应强度、起始光电响应特性差别及光催化析氢电位变化等光电化学性能。光催化性能实验结果表明，适当掺杂CoO_x(110～400 ℃焙烧时最佳掺杂量约为0.4wt% Co，500 ℃焙烧时最佳掺杂量约为0.6～0.8wt% Co)能够显著地提高TiO₂析氢光催化性能，产氢速率提高2个数量级。另外在适当温度下的热处理，能够改善催化剂光催化性能(最佳处理温度为300～400 ℃)。光电化学性能评价结果表明，适当掺杂CoO_x和适当温度下焙烧能在催化剂表面形成较多的析氢活性物种——含钴复合物，能有效增强催化剂光电流响应强度，并使得析氢光还原电位向有利于析氢方向位移。高含量掺杂CoO_x会在催化剂表面形成某种碳化物物种，大量含钴复合物活性中心的出现会降低光吸收效率，增加TiO₂表面光生电子-空穴复合率而使催化剂失去析氢光催化性能。     

Characterization and catalytic behavior of La2 - x (Sr, Th)xCuO4 ± λ in reaction NO+CO

Two mixed oxide systems La₂-_xSr_xCuO_{4± λ} (0.0⩽x⩽1. 0) and La_2-xTh_xCuO_{4± λ} (O. O⩽x⩽ 0.4) with K₂NiF₄ structure were prepared by varyingx values. Their crystal structures were studied by means of XRD and IR spectra. The average valence of Cu ion at B site, nonstoichiometric oxygen (λ) and the chemical composition in the bulk and on the surface of the catalysts were measured by means of chemical analysis and XPS. The catalytic behavior in reaction CO+NO was investigated under the regular change of average valence of Cu ion at B site and nonstoichiometric oxygen (λ). Meanwhile, the adsorption and activation of the small molecules NO and the mixture of NO+CO over the mixed oxide catalysts were studied by means of MS-TPD. The catalytic mechanism of reaction NO+CO over these oxide catalysts were proposed; and it has been found that, at lower temperatures the activation of NO is the rate determining step and the catalytic activity is related to the lower valent metallic ion and its concentration, while at higher temperatures the adsorption of NO is the rate determining step and the catalytic activity is related to the oxygen vacancy and its concentration. Project supported by the National Natural Science Foundation of China.     

稀土对MoSi2力学性能和抗氧化性能的影响

采用自蔓延和真空烧结方法制备了掺杂0．9％La2O3的MoSi2基复合材料，利用热重分析法，SEM和X射线考察了La2O3颗粒对MoSi2力学性能、抗氧化特性以及循环氧化后力学性能的影响。结果表明，与纯MoSi2相比，RE／MoSi2材料的弯曲强度和断裂韧性分别提高了46％和78％；稀土对MoSi2材料的强韧化机制主要是细晶强化、弥散强化和细晶韧化。RE／MoSi2的氧化增重是纯MoSi2的2．5倍，稀土使MoSiz材料的抗氧化性能降低。由于纯MoSi2材料氧化后的晶粒长大，其抗弯强度比氧化前降低了17％。稀土对MoSi2氧化时的晶粒长大倾向有抑制作用，使得RE／MoSi2材料的抗弯强度基本不变。     

化学发光消耗型锰传感器

化学和生物发光是由化学反应产生的一种光辐射,不需要任何光源。又由于它们具有高灵敏度、宽线性范围和相对比较便宜的仪器等优点,因而在化学和生物传感器领域引起了广泛的兴趣。已用于H_2O_2、乳酸和胆固醇等多种生物活性物质的测定,但未见有金属离子传感器的报道。本文发展了一种新型的全固态模式的消耗型锰离子化学发光传感器。该传感器将除待测物外的所有化学发光反应试剂全部固定在阴离子交换树脂Amberlyst A-27上,于化学发光反应之前,将一定量化学发光试剂从固定化试剂柱上洗脱,与样品中的锰离子产生化学发光。已成功地应用于水样中痕量锰离子的测定。每个固定化试剂柱可连续使用100次以上。 1 实验部分 1.1 仪器和试剂 化学发光传感器由流动系统和检测系统两部分组成。其中流动系统主要由蠕动泵、六通阀、固定化试剂柱和流通池组成。检测系统由光电信增管、负高压、放大器和记录仪组成(图1)。     

硝酸氯冰溶胶水解反应过程的计算模拟

用二级微扰(MP2)和密度泛函理论(B3LYP),辅以不同的基组,对硝酸氯在冰表面上水解反应的机理进行了理论计算研究.根据关键部位化学键的松弛效应和关键原子的电荷分布,对冰表面催化的原因进行了深入分析.水分子一方面作为桥,辅助分子间质子发生迁移;另一方面作为连续介质,通过偶极相互作用加快硝酸氯的水解过程.