铁电极上硫脲及衍生物的缓蚀作用研究

用极化曲线方法测定了硫酸溶液中硫脲及其衍生物的浓度变化对铁腐蚀电化学行为的影响，获得了腐蚀电位下缓蚀剂对阴极和阳极过程的作用系数，用ＥＨＭＯ方法对硫脲及其衍生物的结构参数进行了量化计算，分析表明，缓蚀剂对阴极和阳极过程作用系数的大小与这些参量有密切关系。     

热致型液晶聚合物的等温和非等温晶化动力学

利用等温和非等温方法详细研究了芳香族聚酯──热致型聚合物对，对’－联苯二甲酸二辛酯的结晶相和液晶相形成机理，并计算了相变过程中的表面自由能与温度系数，研究结果表明：从介晶相开始的结晶过程是二维异相成核、三维线性增长的，而从各向同性液相开始的液晶相形成过程则是二维异相成核二维线性增长的．对两个晶化过程的表面自由能的研究表明，该聚合物液晶相形成过程的相转变表面自由能比结晶过程小得多，预示了它将具有更大的晶化速率．研究还发现，该聚合物的液晶相形成过程具有比结晶过程大得多的温度敏感性．     

N,N,N′-Trialkyl-1,8-diaminonaphthalenes: convenient method of preparation from protonated proton sponges and the first X-ray information

A simple procedure for the synthesis of N,N,N′-trialkyl-1,8-diaminonaphthalenes is described. It consists in partial demethylation (dealkylation) of commercially available proton sponge [1,8-bis(dimethylamino)naphthalene] and some of its derivatives at heating with HBr-KI-DMF system. Limitation, scope and a possible mechanistic pathway for the reaction are discussed. For isomeric 8-dimethylamino-1-methylamino- and 1-dimethylamino-8-methylamino-4-nitronaphthalenes, X-ray measurements have been conducted. The first examples of complete realkylation reactions in the naphthalene proton sponges are reported.     

水淬渣-累托石颗粒吸附材料的制备及应用

研究了水淬渣-累托石颗粒吸附材料制备工艺条件、再生方法及其去除铜冶炼工业废水中重金属的条件.试验结果表明,累托石与水淬渣的比例为1∶1,另加入10%的添加剂(IS)和50%的水,焙烧温度为400℃时,制成的颗粒吸附材料体积密度为1.06kg/m3,显气孔率为62.29%,吸水率为58.82%,抗压强度为2.22Mpa,吸附效果好,散失率较低.在未调节铜冶炼工业废水pH值的条件下,颗粒吸附材料用量为0.05g/cm3,反应时间为40min,吸附温度为25℃(常温)时,Cu2 、Pb2 、Zn2 、Cd2 、Ni2 的去除率分别为98.2%、96.3%、78.6%、86.2%、64.2%,处理后的水符合国家污水综合排放标准(GB8978-1996)一级标准.颗粒吸附材料对Zn2 、Cu2 有很好的选择性.吸附饱和的颗粒吸附材料用1mol/L氯化钠溶液再生效果好.该颗粒吸附材料具有分离容易、可重复使用、处理效果好、应用前景广阔的优点.     

Synthesis and characterization of Cu,Ni and Zn binding capability of some amino- and imidazole hydroxamic acids: Effects of substitution of side chain amino-N for imidazole-N or hydroxamic-N-H for -N-CH3 on metal complexation

Solution equilibrium studies on Cu(II)-, Ni(II)- and Zn(II)-N-Me-β-Alaninehydroxamic acid (N-Me-β-Alaha), -N-Me-α-alaninehydroxamic acid (N-Me-α-Alaha), -Imidazole-4-carbohydroxamic acid (Im-4-Cha), -N-Me-imidazole-4-carbohydroxamic acid (N-Me-Im-4-Cha) and -Imidazole-4-acetohydroxamic acid (Im-4-Aha) systems have been performed by pH-potentiometry, UV–Vis spectrophotometry, EPR, CD, ESI-MS and ¹H NMR methods. According to the results: (i) the amino-N atoms are more basic in N-Me-α-Alaha and N-Me-β-Alaha than the hydroxamate function, but the trend is just the opposite between the imidazole-N(3) and hydroxamate. (ii) The metal ion anchor is always the hydroxamate part in the amino acid derivatives, while it is always the imidazole-N(3) in the studied imidazolehydroxamic acids. (iii) The three studied N-Me derivatives do not form metallacrowns. Only hydroxamate type chelate is formed with N-Me-β-Alaha, but with N-Me-α-Alaha a new type of coordination mode (via amino-N and hydroxamate-O) also exists. N-Me-Im-4-Cha also forms a dinuclear complex, [M₂L₃], with Cu(II) and Ni(II) (but not with Zn(II)). In this complex, one of the three ligands might bridge the two metal ions (five-membered hydroxamate-(O,O) plus five-membered (N_im, O_carb) bridging bis-chelating mode), while each of the additional two ligands binds to one metal. (iv) The two studied N–H derivatives, having dissociable proton on the hydroxamic-N, are able to form metallacrown species. A pentanuclear complex, [M₅L₄H₋₄], is exclusively formed above pH 4 between Cu(II) and Im-4-Aha. Interestingly, this 12-metallacrown-4 type complex, although together with various mononuclear binding isomers, appears also with Ni(II) and Zn(II). Unfortunately, the complexes of Im-4-Cha are not soluble in water at physiological pH at all.     

水溶性量子点的制备及应用

高量子产率的水溶性量子点在众多领域如发光晶体、薄膜光激发器件,尤其是生物荧光标记中展现出巨大的潜在应用价值.量子点荧光明亮、稳定,激发光谱宽,发射光谱窄,且发射波长可通过改变材料的粒径大小和组成来调控,因而在生物样本尤其是活组织的多色成像中极为有用,能有效避免因样本自身发光和光散射导致的信号干扰.量子点的研究已成为一门新兴的交叉科学,是目前最有吸引力的研究领域之一.近年来,水溶性量子点作生物荧光标记物的研究取得了长足的进展.本文简述了量子点的结构特征及光学特性,重点综述了水溶性量子点的制备方法及应用研究进展,特别是它在生物、医学中作荧光探针的最新研究.     

苯并三氮唑及其羧酸酯衍生物对铜缓蚀机理的分子动力学模拟研究

用分子动力学(MD)方法, 模拟计算了5种铜缓蚀剂[苯并三氮唑(BTA)、苯并三氮唑-5-羧酸甲酯(MBTC)、苯并三氮唑-5-羧酸丁酯(BBTC)、苯并三氮唑-5-羧酸己酯(HBTC)、苯并三氮唑-5-羧酸辛酯(OBTC)]与Cu₂O晶体的相互作用. 结果发现, 中性条件下缓蚀剂分子与Cu₂O晶体的结合能均大于酸性条件下的数值, 但两种条件下结合能的大小排序均为OBTC＞HBTC＞BBTC＞MBTC＞BTA. 对体系各种相互作用以及对关联函数g(r)的分析表明, 体系结合能主要由库仑作用提供, Cu₂O晶体中的Cu原子与缓蚀剂分子中的N原子之间形成了配位键. 在与Cu₂O(001)晶面结合过程中, BTA及其衍生物分子发生了扭曲变形, 但形变能远小于体系的非键相互作用能.     

COMBINED PARTIAL OXIDATION AND CARBONDIOXIDE REFORMING OF METHANE PROCESS TO SYNTHESIS GAS

IntroductionIthasbccndcmonstratcdthatmcthancrcformingt"ithcarbondioxidcpr0ducessynthcsisgasrichincarbonmonoxidc-x"hichisuscfulforthcs}nthcsisofaccticacid'dimcthylcthcrando.o-alcoholsll'2].Carbondioxidcref0rmingismorccndothcrmicthanstcamrcformingfCH4 CO2,'2CO 2H2Ai/'2,,=2473kJ..ol-1(l)Accordingl\"thisrcact1onnccdshighcrtcmpcraturcandlimitsspaccvclocityoffccdgas,Wehavcprct'ious1\studicdmcthancrcformingt"lthC02inthcmonotubcproccssl3J.Inordertoconvcrtmcthancinfccdgascomplctcl}',thcspaccvcloci…     

Influence of velocity and surface temperature of alumina particles on the properties of plasma sprayed coatings

In this paper are described the main characteristics of the plasma spraying process of alumina deposits, i.e., the temperature and flow field of the plasma jets obtained with the classical spraying torches, the injection of the particles into the plasma jet, the particle surface temperature and velocities in the plasma (measured for calibrated alumina particles), and the coating generation. The measurements on the alumina particles are compared with the predictions of a mathematical model. The experimental and computed particle velocities are in rather good agreement. However, this is not the case for the particle surface temperature. Possible reasons for the discrepancy are proposed (influence of the carrier gas, thermophoretic forces, and poor penetration of the particles into the plasma core even for an injection velocity twice that of the optimal calculated one, as shown by recent measurements). Finally the correlations between the particle velocities and surface temperature, and the properties of the alumina coating (porosity, crystal structure, mechanical properties) are studied.     

2,4—二氨基—5—取代苄基嘧啶类质谱研究

报道了8个2,4-二氨基-5-取代苄基嘧啶衍生物的电子轰击质谱及碰撞活化解离和质量分析离子动能谱.该谱提供了化合物醚键及2,4-二氨基-5-取代苄基嘧啶环的主要碎裂途径,总结了一些裂解规律,将有助于这类化合物的结构推断。