我国潜在产出、自然利率与均衡汇率的联合估计及其应用

本文以开放经济下的新凯恩斯宏观经济动态模型为理论依据,基于状态空间模型方法对我国潜在产出、自然利率以及均衡汇率在统一的框架下进行了定量估计,并进一步计算出相应的产出缺口、实际利率缺口与实际汇率缺口,以此作为参照指标对我国宏观经济波动态势、名义利率调整行为以及人民币汇率水平的合理性进行系列分析。分析表明,本文所得到的估计结果不仅是合理、可靠的,而且可以作为我国宏观经济波动态势判断、货币政策制定和效果评价的有用参考。     

Laser in micro and nanoprocessing of diamond materials

Basic processing operations will be presented. These include diamond polishing and shaping, production of conductive pathways, micro‐ and nanostructures on the diamond surface, such as diffractive optical elements. The possibility to laser produce conductive and hollow structures in the diamond bulk, including curved elements, will be demonstrated. Finally, the techniques of laser assisted diamond CVD, that allow production of smooth or selective‐area grown films will be presented     

Broadband Vibrational Cooling of Cold Cesium Molecules： Theory and Experiments

The use of a broadband, frequency shaped femtosecond laser on translationally cold cesium molecules has recently demonstrated to be a very efficient method of cooling also the vibrational degree of freedom. A sample of cold molecules, initially distributed over several vibrational levels, has thus been transfered into a single selected vibrational level of the singlet X^1∑g ground electronic state. Our method is based on repeated optical pumping by laser light with a spectrum broad enough to excite all populated vibrational levels but limited in its frequency bandwidth with a spatial light modulator. In such a way we are able to eliminate transitions from the selected level, in which molecules accumulate. In this paper we briefly report the main experimental results and then address, in a detailed way by computer simulations, the perspectives for a ＂complete＂ cooling of the molecules, including also the rotational degree of freedom. Since the pumping process strongly depends on the relative shape of the ground and excited potential curves, ro-vibrational cooling through different excited states is theoretically compared.     

广义不可逆Braysson热机的性能优化

建立了一个考虑热阻、热漏和内不可逆性且热源和工质之间满足牛顿传热规律的不可逆Braysson热机模型。导出了该模型下输出功率、效率和生态学目标函数的表达式。计算了最大输出功率、最大效率和最大生态学目标函数及它们对应的参数值并通过图来反映它们的变化情况。讨论了热漏、内不可逆性对该热机各种性能参数的影响同时给出了一些重要参数的优化范围。所得结果对实际Braysson热机的优化设计提供了理论依据。     

ICP光源的激光烧蚀固体样品引入方法进展

根据近几年来国内外的有关文献,叙述了ICP光源的激光烧蚀固体进样方法的研究进展及其在物质成分分析中的应用。着重阐述了激光输出特性(输出波长、脉冲宽度、重复频率、能量密度)和环境气氛(氦气、氩气)对样品烧蚀过程的影响,讨论了激光烧蚀室、气溶胶传输管道及样品引入改进装置在蒸发物质被传输到ICP光源过程中的作用。获得较小而均匀的气溶胶颗粒和稳定高效地将烧蚀物质输送到ICP是完善激光烧蚀固体进样技术的关键环节,元素分馏效应及蒸发物沉积是影响分析性能的重要因素。作为实际例子,也讨论了激光烧蚀固体进样电感耦合等离子体发射光谱法/质谱法在金属、玻璃、有机物及其他样品分析方面的应用,对分析方法的准确度、精密度、检出限和灵敏度进行了简要论述。     

拉曼光谱技术在中国古玉、古玉器鉴定和研究中的应用

激光拉曼光谱技术是应用于科技考古研究中的高技术之一,属于无损分析研究,但作为一种很好的无损分析方法它在中国古代玉器研究中的应用并不非常广泛。文章首先介绍了激光拉曼光谱技术的基本原理及近几年来国内外的最新进展,然后从矿物结构与拉曼特征峰之间的关系入手比较了目前国内外5种常见玉石的激光拉曼研究结果。然后分别通过对浙江良渚遗址和河南安阳殷墟遗址出土的4件中国古代玉器与新疆和田地区出产的软玉样品进行对比研究,成功地利用激光拉曼光谱技术对一批中国古代玉器进行了无损鉴定,从而阐明该项技术在中国古代玉器结构测试和材质鉴定中是一种很好的无损分析研究方法。最后,讨论了目前激光拉曼光谱技术在中国古玉和古代玉器研究中存在的局限性并对其发展前景进行了展望。     

Mixed-mode interfacial adhesive strength of a thin film on an anisotropic substrate

The mixed-mode interfacial adhesion strength between a gold (Au) thin film and an anisotropic passivated silicon (Si) substrate is measured using laser-induced stress wave loading. Test specimens are prepared by bonding a fused silica (FS) prism to the back side of a 〈1 0 0〉 Si substrate with a thin silicon nitride (Si_xN_y) passivation layer deposited on the top surface. A high-amplitude stress wave is developed by pulsed laser ablation of a sacrificial absorbing layer on one of the lateral surfaces of the FS prism. Due to the negative non-linear elastic properties of the FS, the compressive stress wave evolves into a decompression shock with fast fall time. Careful selection of the incident angle between the pulse and the FS/Si interface generates a mode-converted shear wave in refraction, subjecting the Si_xN_y/Au thin film interface to dynamic mixed-mode loading, sufficient to cause interfacial fracture. A detailed analysis of the anisotropic wave propagation combined with interferometric measurements of surface displacements enables calculation of the interfacial stresses developed under mixed-mode loading. The mixed-mode interfacial strength is compared to the interfacial strength measured under purely tensile loading.     

Near-wall measurements of turbulence statistics in a fully developed channel flow with a novel laser Doppler velocity profile sensor

This paper reports on the measurements of the near-wall turbulence statistics in a fully developed channel flow. The flow measurements were carried out with a novel laser Doppler velocity profile sensor with a high spatial resolution. The sensor provides both the information of velocity and position of individual tracer particles inside the measurement volume. Hence, it yields the velocity profile inside the measurement volume, in principle, without the sensor being mechanically traversed. Two sensor systems were realized with different techniques. Typically the sensor has a relative accuracy of velocity measurement of 10⁻³ and the spatial resolution of a few micrometers inside the measurement volume of about 500 μm long. The streamwise velocity was measured with two independent sensor systems at three different Reynolds number conditions. The resulting turbulence statistics show a good agreement with available data of direct numerical simulations up to fourth order moment. This demonstrates the velocity profile sensor to be one of the promising techniques for turbulent flow research with the advantage of a spatial resolution more than one magnitude higher than a conventional laser Doppler technique.     

K-shell spectroscopy of plasmas created by intense laser irradiation of micron-scale pyramid and sphere targets

K-shell spectra of targets with microstructured features irradiated by an intense femtosecond laser have been studied. Examination of K_α emission from laser irradiated Si targets coated with micron-scale polystyrene spheres indicates that the emission is enhanced by a factor of 3 over emission from planar solids. Sphere-coated targets also emit K-shell He-like Si radiation indicating the presence of a hot dense plasma beneath the microspheres. Furthermore, K_α from Ti foils coupled to micro-tipped reentrant pyramid and wedge shaped targets has been studied, however, no significant enhancement of the K_α yield is observed for these kinds of targets. These studies illustrate that, with correct tailoring of the target surface, field enhancements can be used to increase X-ray emission from intensely irradiated targets.     

用激光解吸附电离飞行时间质谱法检测悬浮土壤颗粒物

在自行研制的气溶胶飞行时间激光质谱仪(ATOFLMS)上实时探测单个悬浮土壤颗粒的粒径和化学成分。利用双束连续激光对单个粒子的空气动力学粒径进行测量,并用266 nm的Nd∶YAG激光器对气溶胶单粒子进行解吸附电离作用,产物离子通过飞行时间质谱仪的无场漂移区后完成单粒子化学成分的检测。本实验中使用了4个不同地区的土壤样本,在实验室内对分析的样本进行预处理和再悬浮,通过导管引入ATOFLMS进行测量,得到大量单粒子的粒径和质谱数据。发现在众多的单粒子的阳离子质谱中,金属成分以地壳元素(Fe, K, Al, Ca)为主,在其他阳离子质谱中包含了Mg和Na等。对悬浮土壤粒子的粒径进行实时检测的结果表明这些粒子多以粗粒子为主, 粒径主要集中在1～2 μm。实验结果表明该仪器在大气气溶胶环境监测及相关研究领域具有重要的实用价值。