Simultaneous quantification of ten Amadori compounds in tobacco using liquid chromatography with tandem mass spectrometry

Amadori compounds are aroma precursors formed in the initial phase of the Maillard reaction. Based on their similar structures, simultaneous quantification of more than six Amadori compounds in tobacco has not been reported yet. In this study, a simple and rapid method was developed to simultaneously quantify ten Amadori compounds including the isomers of Fructose‐isoleucine and Fructose‐leucine in tobacco. The separation was performed on an Atlantis T₃ column (2.1 × 250 mm, 5 μm) by gradient elution using acetonitrile and water as the mobile phases. The quantification method was systematically evaluated and proven to be sensitive and accurate. The linearity was good, with correlation coefficients of 0.9977–0.9999. The limits of detection and quantitation were 1.354–2.532 and 4.516–8.444 ng/mL, respectively. The recoveries were 84.0–119.6%, and the relative standard deviations were 1.33–5.40%. The method was used to analyze the changes in the amounts of ten Amadori compounds in tobacco before and after tobacco primary processing. The analysis shows that the Maillard reaction occurs during the short processing period.     

Ultra high performance liquid chromatography coupled with electrospray ionization/quadrupole time‐of‐flight mass spectrometry for the rapid analysis of constituents in the traditional Chinese medicine formula Wu Ji Bai Feng Pill

An ultra high performance liquid chromatography coupled with electrospray ionization quadrupole time‐of‐flight mass spectrometry method in both positive and negative ion modes was established in order to comprehensively investigate the major constituents in Wu Ji Bai Feng Pill. Briefly, a Waters ACQUITY UPLC HSS C₁₈ column was used to separate the aqueous extract of Wu Ji Bai Feng Pill. A total of 0.1% formic acid in acetonitrile and 0.1% aqueous formic acid v/v were used as the mobile phase. All analytes were determined using quadrupole time‐of‐flight mass spectrometry with electrospray ionization source in positive and negative ion modes. At length, a total of 173 components including flavones and their glycosides, monoterpene glycosides, triterpene saponins, phenethylalchohol glycosides, iridoid glycosides, phthalides, tanshinones, phenolic acids, sesquiterpenoids and cyclopeptides were identified or tentatively characterized in Wu Ji Bai Feng Pill in an analysis of 16.0 min based on the accurate mass and tandem mass spectrometry behaviors. The developed method is rapid and highly sensitive to characterize the chemical constituents of Wu Ji Bai Feng Pill, which could not only be used for chemical standardization and quality control of Wu Ji Bai Feng Pill, but also be helpful for further study in vivo metabolism of Wu Ji Bai Feng Pill.     

A Puckered Singlet Cyclopentane‐1,3‐diyl: Detection of the Third Isomer in Homolysis

In the photochemical denitrogenation of 1,4‐diaryl‐2,3‐diazabicyclo[2.2.1]heptane ( AZ6 ) bearing sterically hindered substituents, a curious new absorption band at about 450 nm was observed under low‐temperature matrix conditions, together with the previously well‐characterized planar singlet diradical pl‐¹ DR6 with λ_max=≈580 nm. The 450 nm species was electron paramagnetic resonance (EPR)‐silent. Instead of generating the planar diradical pl‐¹ DR6 and the precursor azoalkane AZ6 upon warming, the ring‐closed bicyclo[2.1.0]pentane derivative SB6 , that is, the AZ6 denitrogenation product was identified. Based on product analysis, low‐temperature spectroscopic observations, high‐level quantum‐mechanical computations, viscosity effect, and laser‐flash photolysis, the puckered singlet diradicaloid puc‐¹ DR6 was assigned to the new 450 nm absorption. The latter was detected experimentally at the same time as the planar singlet diradical pl‐¹ DR6 . Sterically demanding substituents as well as viscosity impediments were essential for the detection of the experimentally hitherto unknown puckered singlet cyclopentane‐1,3‐diyl diradicaloid puc‐¹ DR6 , that is, the third isomer in homolysis. The present findings should stimulate future work on the mechanistically fascinating stereoselectivity documented in the formation of bicyclo[2.1.0]pentanes during the 2,3‐diazabicyclo[2.2.1]heptane denitrogenation.     

Minireview: Advances in Germanium Isotope Analysis by Multiple Collector–Inductively Coupled Plasma–Mass Spectrometry

The advent of multiple collector–inductively coupled plasma–mass spectrometry (MC-ICP-MS) has made the high-precision determination of Ge isotopes possible, which leads to the widespread application of Ge isotopes in earth, ocean, and cosmochemistry fields. This paper reviews the history of Ge isotope analysis, chemical dissolution and purification, and mass spectrometry measurements. Concentrated HNO₃ is sufficient to dissolve nearly all types of samples and HF is also involved for Si-rich samples. Low-temperature ashing prior to dissolution is an alternative way to preconcentrate Ge in organic-rich samples. For different matrices, Ge isotopes can be determined by MC-ICP-MS coupled with a traditional nebulizer system or hydride generation system after two-step separation, one step cation/anion-exchange separation, or Mg/Fe co-precipitation protocols. Ion-exchange column methods are suitable for samples with elevated matrix and Ge content such as sulfides, iron oxides, silicate rocks, and coals, whereas Mg or Fe coprecipitation methods are particularly suitable for all kinds of water. Hydride generation systems are improved over traditional nebulizer system due to the smaller sample quantity and fewer matrix-related interferences. Sample-standard bracketing, double spike, and external Ga isotope normalization are used to mass bias correction and yield consistent results. Analytical methods involving Ge-poor samples and Ge isotope analyses based on different Ge species or specific Ge compound in natural environment will be important prospects in the further study. For further applications of Ge isotopes in mineral deposits such as sulfide and iron oxide deposits, sulfides, and iron oxides reference materials should be developed in the future.     

Multiresidue determination of 29 pesticide residues in pepper through a modified QuEChERS method and gas chromatography–mass spectrometry

This study describes the development and use of a modified quick, easy, cheap, effective, rugged and safe (QuEChERS) method coupled with gas chromatography with mass spectrometry to determine 29 pesticide residues in green, red and dehydrated red peppers. Pesticides were extracted with acetonitrile (1% acetic acid), partitioned with sodium chloride and purified with primary secondary amino and octadecyl silane in acetone. The QuEChERS extraction conditions were optimized, and the matrix effects that might influence recoveries were evaluated and minimized using matrix‐matched calibration curves. Under the optimized conditions, the calibration curves for 29 pesticides showed good linearity in the concentration range of 0.1–10 μg/mL with determination coefficient R² > 0.998. The limits of quantification of the 29 pesticides were 0.006–0.06 mg/kg for green pepper, 0.005–0.039 mg/kg for red pepper and 0.014–0.25 mg/kg for dehydrated red pepper. These values are below the suggested regulatory maximum residue limits. The mean recoveries ranged between 70.1 and 110%, and the relative standard deviations were <13%. The developed method was successfully applied to commercial samples. Some samples were found to contain the 29 pesticides with levels below the legal limits. Copyright © 2016 John Wiley & Sons, Ltd.     

Proton Nuclear Magnetic Resonance Spectrometry-Based Metabolic Characterization of Panax Notoginseng Roots

The radix of Panax notoginseng is an important herbal resource for clinics, commercial markets, and the health industry worldwide. The quality of P. notoginseng roots is known to be associated with its cultivation age. This study used ¹H-nuclear-magnetic-resonance-spectrometry-based metabolic profiling to characterize P. notoginseng roots. Twenty metabolites—including four ginsenosides—contributed to the composition of P. notoginseng according to age. A partial least-squares regression model using a combined data set from two solvent systems was the best predictor of cultivation age. Finally, receiver-operating-characteristic analysis was used to screen potential markers of P. notoginseng root age. These results may be applied to the development of medicinal and nutraceutical products using P. notoginseng roots.     

Determination of aminoglycoside residues by liquid chromatography and tandem mass spectrometry in a variety of matrices

A quantitative LC–MS/MS method was developed for the determination of 13 commonly used aminoglycoside antibiotics in meat (pork muscle, fish, and veal livers and kidneys). The proposed method is sufficiently sensitive and highly selective. Unlike other previously reported methods, it uses a simple clean-up procedure based on a strong cation-exchange solid-phase cartridge that permits high sample extract loading volumes. A unique elution regime based on a volatile buffer at intermediately high pH value in combination with an organic solvent provides quantitative elution of the various aminoglycosides. This methodology ensured that neither a breakthrough of weakly retained aminoglycosides (e.g. spectinomycin) nor the incomplete elution of strongly retained analytes (e.g. neo- and gentamycin) is observed. The single-step clean-up is fast and produces clean extracts that minimize matrix-related signal suppression in the electrospray interface.     

Recent Developments in Flow Injection/Sequential Injection Liquid-Liquid Extraction for Atomic Spectrometric Determination of Metals and Metalloids

Abstract

This review aims to provide a critical overview of automated flow injection and sequential injection liquid-liquid extraction for preconcentration and/or separation of ultra-trace metal and metalloid species hyphenated with atomic spectrometric detection systems, including some new trends and applications in the subbranches of cloud point extraction (CPE), wetting film extraction (WFE), supported liquid membrane extraction (SLME), extraction chromatography (EChr), and liquid-phase microextraction (LPME) techniques. The analytical performance of flow-injection/sequential injection liquid-liquid extraction methods is markedly affected by the components of the flow network such as segmentor, extraction coil, and phase separator. Thus, an overall presentation of system components along with some novel strategies for interface with atomic spectrometers is discussed and exemplified with selected applications.     

Relationships between structure,ionization profile and sensitivity of exogenous anabolic steroids under electrospray ionization and analysis in human urine using liquid chromatography–tandem mass spectrometry

The relationships between the ionization profile, sensitivity, and structures of 64 exogenous anabolic steroids (groups I–IV) was investigated under electrospray ionization (ESI) conditions. The target analytes were ionized as [M + H]⁺ or [M + H–nH₂O]⁺ in the positive mode, and these ions were used as precursor ions for selected reaction monitoring analysis. The collision energy and Q3 ions were optimized based on the sensitivity and selectivity. The limits of detection (LODs) were 0.05–20 ng/mL for the 64 steroids. The LODs for 38 compounds, 14 compounds and 12 compounds were in the range of 0.05–1, 2–5 and 10–20 ng/mL, respectively. Steroids including the conjugated keto‐functional group at C3 showed good proton affinity and stability, and generated the [M + H]⁺ ion as the most abundant precursor ion. In addition, the LODs of steroids using the [M + H]⁺ ion as the precursor ion were mostly distributed at low concentrations. In contrast, steroids containing conjugated/unconjugated hydroxyl functional groups at C3 generated [M + H ? H₂O]⁺ or [M + H ? 2H₂O]⁺ ions, and these steroids showed relatively high LODs owing to poor stability and multiple ion formation. An LC‐MS/MS method based on the present ionization profile was developed and validated for the determination of 78 steroids (groups I–V) in human urine. Copyright © 2015 John Wiley & Sons, Ltd.     

MALDI-MS of drugs: Profiling,imaging, and steps towards quantitative analysis

Matrix-assisted laser desorption/ionization (MALDI) is a soft ionization technique which can be used in mass spectrometry to produce ions from biomolecules without inducing the fragmentation associated with traditional methods of ionization. When used with small molecules, the lack of fragmentation allows identification of specific molecules against a background of alternative signals; thus, for example, the presence of drug molecules and metabolites can be distinguished from a range of alternative biomolecules present within a tissue sample. Using highly collimated lasers in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) allows imaging of a tissue sample whereby the laser is rastered across the sample and individual mass spectra are collected in a serial manner. Thus, the distribution of the molecules within the tissue sample can be presented in the form of a 2D image. While the detection of specific drug molecules and metabolites within biological samples has its uses, quantification of those same molecules would be of greater benefit in a clinical setting. However, accurate quantification presents additional challenges. We present an overview of the MALDI-MS technique followed by recent progress in profiling drugs and their metabolites through imaging drug distributions within tissues and finish with recent developments in the quantification of drugs in tissues by MALDI-MSI.