Study on the Structure and Properties of Ordered Conductive Polymer Ultrathin Film

A Langmuir-Blodgett (LB) inducing method was firstly used to prepare single layer and multilayer conducting composite PEDOT-PSS film. The film-forming ability of ionization ODA and ODA-SA monolayer spread on PEDOT-PSS nanoparticle sub-phase and the behavior of ODA/PEDOT-PSS assembly particles on pure water were firstly investigated. The results indicated that nanoparticles in the suphase are packed in the ionization monolayer and stable complex Langmuir film is formed at the air/water interface. It has been found that the best film-forming conditions for composite film are as follows:distinct interface was formed between ODA and PEDOT-PSS layer and single layer thickness of PEDOT-PSS was about 23 nm,well accordant to the size of PEDOT-PSS nanoparticles. Different structures were designed to test the conductive ability of these composite films and a variable range hopping (VRH) model was used to explain the film conductive mechanism. The results indicated that a 3D-VRH model explained well the transferring of charge carrier in the multilayer film.     

有机钌螯合物/TiO_2杂化膜修饰电极上Pt纳米团簇的光电流增强效应

利用LB膜技术可控制备了纳米单层和多层的二氧化钛-有机钌螯合物杂化膜,并研究了上述无机-有机杂化膜修饰电极在Pt纳米团簇敏化后的光电流增强效应.实验结果表明:(1)纳米单层TiO2/[Ru(phen)2(dC18bpy)]2+(简称为TiO2-Ru)杂化膜的平均厚度为(3.6±0.5)nm;(2)在光照条件下TiO2-Ru杂化膜能有效催化还原[Pt(NH3)6]4+形成粒径位于20～160nm之间的Pt纳米团簇;(3)Pt纳米团簇的引入消除了金属钌螯合物中配体对电子传递的阻碍作用,改变了电子传递途径,从而有效减少了电子空穴对的复合,提高了Pt纳米团簇敏化的n层杂化膜修饰电极(ITO/(TiO2-Ru)n/Pt)在支持电解质中的光电流.与纳米单层TiO2-Ru杂化膜修饰的ITO电极(ITO/TiO2-Ru)相比,当工作电压为900mV时,ITO/TiO2-Ru/Pt在0.1mol·L-1的NaClO4电解质溶液中和光照(λ360nm)条件下,单位面积的光电流提高了约5倍;(4)ITO/(TiO2-Ru)n/Pt电极光电流的大小与杂化膜的层数密切相关,当TiO2-Ru杂化膜的层数从一层、二层增加到四层时,光电流呈现先升高后下降行为,这表明ITO/(TiO2-Ru)n/Pt电极的电子传递过程直接通过非电活性的二氧化钛纳米单层进行.     

Langmuir-Blodgett film based on MEH-PPV for cholesterol biosensor

Cholesterol oxidase (ChOx) has been immobilized onto conducting poly[2-methoxy,5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV)/stearic acid (SA) Langmuir-Blodgett film transferred onto octadecanethiol (ODT) modified gold plate. The ChOx/MEH-PPV/SA LB film bioelectrode exhibits has been characterized by FT-IR, contact angle, and atomic force microscopy. The response of the ChOx/MEH-PPV/SA LB film bioelectrode carried out using differential pulse voltammetry (DPV) studies reveal linearity from 1.29 to 12.91 mM of cholesterol concentration and response time as 30 s. This ChOx/MEH-PPV/SA bioelectrode exhibits values of correlation coefficient as 0.9939, standard deviation as 0.0029 μA and limit of detection as 1.66 mM. UV-visible spectrophotometer studies reveal that 5.2 × 10⁻³ U of ChOx are actively working per cm² area of ChOx/MEH-PPV/SA LB film bioelectrode and this bioelectrode is thermally stable upto 55 °C with reusability of about 60 times.     

Oxidation and biodegradation of polyethylene films containing pro-oxidant additives: Synergistic effects of sunlight exposure, thermal aging and fungal biodegradation

Synergistic effects of sunlight exposure, thermal aging and fungal biodegradation on the oxidation and biodegradation of linear low density poly(ethylene) PE-LLD films containing pro-oxidant were examined. To achieve oxidation and degradation, films were first exposed to the sunlight for 93 days during the summer months followed by their incubation with fungal strains previously isolated from the soil based on the ability to grow on the oxidized PE-LLD as a sole carbon source. Some films were also thermally aged at temperatures ranging between 45°C and 65 °C, either before or after fungal degradation. Films with pro-oxidant additives exhibited a higher level of oxidation as revealed by increase in their carbonyl index (COi). In addition to increase in the COi, films showed a slight increase in crystallinity and melting temperature (T_m), considerably lower onset degradation temperatures, and a concomitant increase in the % weight of the residues. The level of oxidation observed in thermally aged films was directly proportional to the aging temperature. The PE-LLD films with pro-oxidant exposed to sunlight followed by thermal aging showed even higher rate and extent of oxidation when subsequently subjected to fungal biodegradation. The higher oxidation rate also correlated well with the CO₂ production in the fungal biodegradation tests. Similar films oxidized and aged but not exposed to fungal biodegradation showed much less degradation. Microscopic examination showed a profuse growth and colonization of fungal mycelia on the oxidized films by one strain, while another spore-producing strain grew around the film edges. Data presented here suggest that abiotic oxidation of polymer's carbon backbone produced metabolites which supported metabolic activities in fungal cells leading to further biotically-mediated polymer degradation. Thus, a combined impact of abiotic and biotic factors promoted the oxidation/biodegradation of PE-LLD films containing pro-oxidants.     

Heterocyclic derivatives of long-chain diacetylenic acids

Acyl derivatives of 2-aminopyridine, 2-aminopyrimidine, 4-amino-2,2,6,6-tetramethylpiperidine-1-oxyl, and 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl were obtained from long-chain diacetylenic acyl chlorides and the corresponding heterocyclic compounds. Spreading isotherms of monolayers on a water surface show that lengthening of the hydrocarbon chain and replacement of the pyridyl groups in these compounds by the more hydrophilic pyrimidyl groups render the films more condensed. Long-chain acyl derivatives of nitroxyl radicals form monolayers possesing a low collapse pressure. ESR spectra of Langmuir-Blodgett films of these radicals before and after photopolymerization were recorded.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2009–2012, October, 1995.The authors are grateful to S. A. Dzyuba for his help in recording ESR spectra and for helpful discussion.This work was financially supported by the Russian Foundation for Basic Research (Project No. 93-03-04027).     

Materials for all-solid-state thin-film rechargeable lithium batteries by sol-gel processing

A novel all-solid-state thin-film lithium battery has been fabricated by spin coating V₂O₅ and LiClO₄-SiO₂ thin films on a stainless steel substrate. The LiClO₄-SiO₂ electrolyte has been synthesized using a new sol-gel route and it has been characterized by electrochemical impedance spectroscopy. The Li⁺ ion conductivity of the spin-coated thin film thus measured is in the order of 10^–6 S/cm, at 25 °C, which is sufficient for electrolytes in such thin-film batteries. The battery shows a typical discharge capacity of about 150 μAh/mg and satisfactory cathodic efficiency and cycle-life performance. Electronic Publication     

Monolayers and Langmuir-Blodgett films of crown-substituted phthalocyanines

Tetra-15-crown-5-phthalocyanine ligand and its ruthenium complex with axial CO and MeOH groups were synthesized. The properties of their monolayers and Langmuir-Blodgett films were studied. In the case of the ligand, monolayer films of molecular associates are formed. The compatibility of the ligand and stearic acid in a mixed binary monolayer was established. Stearic acid improves the ligand distribution over the water surface and results in the formation of monolayer associates immobilized in its matrix. The condensation effect of Na⁺ cations on the mixed monolayers was found. The ruthenium complex (R₄Pc)Ru(MeOH)(CO) forms stable true monolayers. The macrocycle planes in stacking are inclined relatively to the normal to the subphase surface by an angle of 25°. The Langmuir-Blodgett films of the complex were established to have redox peaks. A high electrochemical stability of the Langmuir-Blodgett films and a high electroactivity of phthalocyanine rings were demonstrated. It was shown by impedance spectroscopy that the binding of Na⁺ and K⁺ ions by Langmuir-Blodgett films of the (R₄Pc)Ru(MeOH)(CO) complex results in an increase in the impedance values in a region of medium frequencies by three and five times, respectively.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2426–2435, November, 2004.     

1－苄基－9－氢富勒烯－60LB多层膜的制备及其光学非线性性质

利用π－Ａ等温线、小角Ｘ射线衍射（ＳＡＸＤ）和光学测量方法研究了一种取代富勒烯（Ｃ６０－Ｂｅ）ＬＢ膜的结构特性。纯Ｃ６０－Ｂｅ分子以体相（ｂｕｌｋｐｈａｓｅ）的形式存在于气－液界面上。氮冠（醚）（ＮＣ）分子作为隔层材料，与Ｃ６０－Ｂｅ分子相混合可以制备性能优良的ＬＢ膜。π－Ａ、吸收和小角Ｘ光衍射测量表明：这种混合膜结构的改善是由于Ｃ６０－Ｂｅ分子镶嵌在ＮＣ分子的双脂链之间造成的。通过测量三次谐波产生（ＴＨＧ）可以推出Ｃ６０－Ｂｅ的三阶非线性系数χ（３）＝２．１×１０－１１ｅｓｕ。     

Fabrication of anodic photocurrent generation systems by use of 6-O-dihydrophytylcellulose as a matrix or a scaffold of porphyrins

Langmuir-Blodgett (LB) films containing porphyrin molecules were fabricated by use of 6-O-dihydrophytylcellulose (DHPC) toward anodic photocurrent generation systems. To suppress the porphyrin aggregation, two different approaches were applied: (1) mixing a low-molecular-weight porphyrin having a diterpenoid carbon skeleton (DPor) with DHPC as a matrix (matrix fabrication) and (2) bonding porphyrin molecules to the hydroxyl groups of DHPC covalently, converting into 6-O-dihydrophytyl-2,3-di-O-[p-(10,15,20-triphenyl-5-porphyrinyl)-benzoyl]cellulose as a scaffold (scaffold fabrication). The structure and film properties of the monolayers and the LB films were investigated by the surface pressure (π)–area (A) isotherm measurements, atomic force microscopy, UV–Vis spectroscopy, and absorption dichroism measurements. The porphyrin aggregation in the LB film could be well suppressed only by the scaffold fabrication, leading to the improvement of the photocurrent quantum yields. The efficient photocurrent performance can be demonstrated by the isolation and the parallel orientation of porphyrin moieties due to the cellulose rigid scaffold. This paper was the subject of the Best Poster Award of the 235th edition of the ACS National Meeting, Cellulose and Renewable Materials.