面向CMUT声发射特性的驱动电路优化设计

根据电容式微机械超声换能器(CMUT)的工作原理,设计了用于驱动CMUT发射超声波的电路.通过适当的串行匹配,消除了脉冲激励信号的过冲现象.在此基础上进一步探究了脉冲激励参数对CMUT声发射特性影响.结果表明,随着激励脉冲个数的增加,CMUT输出超声信号的有效带宽逐渐变窄,二次谐波逐渐增强;随着激励脉冲占空比的增加,C...     

Analysis of deadweight oscillation in a deadweight force machine using a build-up system

This paper describes a build-up system that measures the deadweight oscillation in a deadweight force machine. When a build-up system is calibrated using a deadweight machine, the oscillating signal components of force transducers in the build-up system are strongly related to the motion of deadweight. The authors have, therefore, proposed a model based on the analysis of oscillating signals of force transducers to measure the deadweight oscillation. The analysis of the force transducer signals and the displacement sensor signals shows the validity of the proposed model. The authors have also investigated the behavior of deadweight motion for a deadweight force machine of 498 kN using the proposed model.     

基于数字电感的压电换能器动态匹配的研究

本文用实验的方法叙述了压电换能器的静态夹持电容随温度变化的特性,以及引起匹配质量下降的问题。提出了一种关于匹配的新概念－数字电感动态匹配,使匹配电感跟随静态电容的变化,从而提高匹配质量,实验结果表明,这种动态匹配方法是行之有效的。     

磁致伸缩-压电混合激励Janus换能器结构特征参量与纵振频率之间的关系

为了拓宽Janus换能器的工作频带,使用超磁致伸缩材料Terfenol-D与PZT压电陶瓷作为混合激励元件驱动Janus换能器,研究了其结构特征参量与纵振频率之间的关系.首先归纳了磁致伸缩-压电混合激励Janus换能器的12个结构特征参量.随后通过模态分析,证明换能器具有两种纵振动模态.最终经过有限元仿真计算,总结分析...     

用单片机对实验室恒温控制系统的设计

详细地叙述了用MCS-15单片机设计实验室恒温控制系统的硬件电路及软件实现,细致地介绍了设计构图,各功能模块的程序流程图以及程序清单．该装置控制温度范围广泛,可靠性强,灵敏度高,使用灵活．通过实验室研制安装使用,达到了设计者所设计的效果．     

氢气/丙烷/空气预混气体爆轰性能的实验研究

通过采用压力传感器和烟灰板两种测试设备,开展了常温常压下氢气/丙烷和空气混合气体爆轰性能的实验研究。实验过程中观察到自持爆轰波,爆轰速度比值在0.99~1之间,爆轰压力比值在0.8~1.2之间。爆轰胞格尺寸在10~50 mm范围内,建立了爆轰胞格尺寸和化学诱导长度的关系式。随着丙烷不断添加,爆轰速度减小,而爆轰压力和胞格尺寸增加。这种变化趋势起初较快,而后变缓。因为起初氢气摩尔分数较大,混合气体趋向于氢气/空气的爆轰性能;而后因丙烷摩尔质量较大,丙烷逐渐起主要作用,混合气体表现出丙烷/空气的爆轰性能。     

Determining the optimal pre-tightening force of a sandwich transducer by measuring resonance resistance

The pre-tightening force applied on a sandwich transducer plays a key role on the transducer’s vibration performance. Typically, a transducer’s optimal pre-tightening force is not known during assembly. The objective of this study is to examine a method for determining the optimal pre-tightening force for a sandwich transducer. We propose that the transducer’s optimal pre-tightening force can be measured indirectly through the resonance resistance. Resonance resistance is an equivalent electric parameter which reflects the transducer’s mechanical energy loss, and can be measured easily using an impedance analyzer. The relationship between resonance resistance and the pre-tightening force is analyzed both theoretically and experimentally. Measurement of resonance resistance based on transducer’s admittance circle is studied. Experiments involving this relationship are conducted. Results indicate that the front-end surface amplitude of the sandwich transducer reaches a maximum when the pre-tightening force is optimal, the resonance resistance tends to a minimum, but with a small offset. This indicates that the minimum value of resonance resistance corresponds closely to the highest vibration amplitude of the transducer, but not exactly. Thus, by determining the minimum resonance resistance, the optimal pre-tightening force can be determined.     

微小位移测量仪

用“差动电容”传感器测量微小位移,可帮助学生完成“弹性模量的测量”等实验。应用现代测量技术,简化了实验过程,提高了实验精度。     

频率式电涡流位移传感器特性的计算方法

当被探测平面为相对导磁率等于1的良一导体平面时,从理论上推导出频率式电涡流位移传感器的频率一位移特性表达式,计算结果与实验结果之间有很好的一致性