压差式矢量水听器方位估计中的干扰抵消

矢量水听器由于能获取声场中标量（声压）和矢量（振速）信息，因此单个的矢量水听器就可实现目标方位估计。单个矢量水听器是利用信号的声压和质点振速之间相关性进行信号方位估计，但是当存在干扰，并且干扰和信号之间相关时，如果对运用能量流进行方位估计的方法不加改进，则会出现很大的误差，甚至出现错误的估计。本文提出一种存在已知噪声干扰情况下的干扰抵消方法，并针对该方法进行了仿真试验，最后运用湖试数据进行了验证。结果表明，该方法能有效地减弱相千千柑对信号的影响，实现对信号的方位估计。     

Nanophotonics and nanometrology with planar X-ray waveguide-resonator

The mechanism of X-ray waveguide-resonance propagation or the radiation superstream model, which can become the ground of X-ray nanophotonics, is discussed briefly. Some attention is devoted to features consideration of the simplest devices characterized by the waveguide-resonance transportation of X-ray beams. The experimental data showing the user possibilities of a simplest waveguide-resonators application for diffractometry are presented. We discuss the main reasons to improve the metrological characteristics for total reflection X-ray fluorescence (TXRF) analytical method in case when the target exciting beam is formed by a waveguide-resonator. Some problems appearing during the waveguide-resonator application are formulated.     

Interference of circularly polarized light: contrast and application in fabrication of three-dimensional periodic microstructures

The contrast of interference pattern formed by two circularly polarized waves and by a linearly polarized wave and a circularly polarized one is discussed. The results are compared with that by two linear beams. It shows that the use of circular light in holographic fabrication of three-dimensional periodic microstructures may remove the necessity of beam ratio and polarization optimization needed in the interference of three linear noncoplanar beams and improve the uniform contrast of resultant pattern simultaneously.     

“Optimization of aircraft maintenance/support infrastructure using genetic algorithms—level of repair analysis”

Level of repair analysis (LORA) is an approach used during the design stage of complex equipment for analysis of the cost effectiveness of competing maintenance strategies. LORA is carried as a part of the life cycle cost and cost of ownership analysis and plays a significant role in minimizing the life cycle cost and cost of ownership of the capital equipment. Since many purchasing decisions of complex equipment are based on cost of ownership, it has become essential to carry out LORA to compete in the market. In this paper, we develop a mathematical model for LORA and propose a solution methodology based on genetic algorithms. The concept is illustrated using a hypothetical aircraft engine.     

一种新的多目标演化算法--稳态淘汰演化算法

提出一种新的多目标演化算法，稳态淘汰演化算法（Steady Elimination Evolutionary Algorithm），该算法利用稳态淘汰策略，能够在不需要额外计算量和存储空间的情况下，自发地保存精英个体(elitist），试验结果表明该算法优于当前的多目标演化算法。     

多电子束契伦柯夫自由电子激光振荡器

我们对多电子束契伦柯夫自由电子激光进行了首次实验研究。280A,500kV的电子束被引入一多介质矩形谐振腔,在频率为33.4GHz处产生了1.7MW的契伦柯夫相干受激辐射。互作用效率为1.2％。     

ICP-AES中Ca、Al之间相互干扰的研究

本文在不同条件下比较详细地研究了Ca与Al在ICP-AES中的相互干扰,结果表明:这种干扰的垂直空间分布与其它元素的基体效应不同,特别在低观察区域Ca、Al之间呈现较为明显的相互抑制效应,说明Ca和Al之间产生了溶质挥发干扰。对分析条件特别是入射功率、载气流量及观察高度进行最优化可以使这种干扰减至最小。     

高纯金属镨中痕量稀土杂质的电感耦合等离子体原子发射光谱分析及光谱干扰的校正

本文提出了PGS-2型平面光栅光谱仪(色散率0.18纳米,二级光谱)与PlasmaTherm ICP-5000D射频发生器联用,乙醇预去溶方式进样,同时直接测定高纯金属镨中5个痕量稀土杂质元素的方法。并讨论了基体浓度对检出限的影响以及光谱干扰及其校正方法。当样品溶液中镨的浓度为5毫克/毫升时,测定下限分别为镧、钕和钐0.002%,铈0.003%和钇0.0005%。获得了良好的实验结果,其相对标准偏差为1.2-6.2%。     

电感耦合等离子体原子发射光谱分析中不同电离电位元素基体效应的比较研究

选择不同电离电位的基体元素K、Na、La、Y和Mg,比较研究了它们对分析元素谱线强度的影响,其影响程度与谱线激发电位及基体元素电离电位有定量的相关关系。碱金属基体(K、Na)和非碱金属基体(La、Y和Mg)对分析元素检出限、背景强度及其相对标准偏差的影响显著不同,后者的记忆效应也大于前者。La的电离电位与Na相差不大。但其基体效应与Y相似,表明墓体效应与基体元素的化学性质有关。     

辉光放电原子发射光谱法快速分析生铸铁

通过对辉光光源参数-放电电流、放电电压、预溅射时间和分析时间对生铸铁标样放电强度和稳定性影响的研究,优化光源参数,建立了辉光放电原子发射光谱法同时测定生铸铁中碳、硅、锰、磷、硫等12个元素的快速分析方法。分析生铸铁试样时发现了不同灰口铸铁在碳分析结果方面存在偏差,对碳的偏差进行了讨论并通过制样条件和光源参数的调整可以有效地减小偏差。通过对不同生铸铁样品进行准确度和精密度试验,结果表明:分析结果与标准值或化学法结果一致。分析一件试样的时间仅需2~5 min。