原子核电荷半径的新公式

结合原子核的电荷半径的实验数据,详细分析了描述原子核电荷半径的经验公式,表明电荷半径的Z^1/3律优于A^1/3律.更细致的考察发现,对于远离β稳定线的核素,电荷半径具有近似线性的同位旋相关性.由此得到的同位旋相关的Z^1/3公式更适合描述原子核的电荷半径.     

Mössbauer and X-ray diffraction characterization of Fe60Al40 coatings prepared by thermal spraying

Microstructured (atomized) and nanostructured (milled) Fe₆₀Al₄₀ powders together with their corresponding coatings synthesized by High Velocity Oxy-fuel (HVOF) or Atmospheric Plasma Spray (APS) thermal spraying techniques have been characterized by Mössbauer Spectroscopy (MS) and X-ray Diffraction (XRD). The evolution of the microstructure and the atomic ordering degree in the powders and coatings are discussed at the light of the various processing conditions. The operational correlation between the parameters of the duplex morphology of coatings and the processing parameters is discussed.     

High Voltage Pulse Power and the Technics for the Capacitor Power-Storage Type

Lower hybrid wave （LHW）, electro cyclotron （EC） and neutral beam injection （NBI） etc. are the important methods of auxiliary heating. They would be devoted to the HL-2A tokamak step by step. In order to satisfy the debug of each system and the need of the experiment, the system should be equipped with high voltage pulse power （HVPP） according to the requirement.     

Lot-sizing with fixed charges on stocks: the convex hull

In this paper, we examine a variant of the uncapacitated lot-sizing model of Wagner–Whitin that includes fixed charges on the stocks. Such a model is natural in a production environment where stocking is a complex operation, and appears as a subproblem in more general network design problems.

Linear-programming formulations, a dynamic program, the convex hull of integer solutions and a separation algorithm are presented. All these turn out to be very natural extensions of the corresponding results of Barany et al. (Math. Programming Stud. 22 (1984) 32) for the uncapacitated lot-sizing problem. The convex hull proof is based on showing that an extended facility location formulation is tight and by projecting it onto the original space of variables.     

Analysis of Suzuki, Shanker, and Kumar formulations under strong compressions

A critical analysis of the Suzuki, Shanker, and Kumar formulations is presented by studying different classes of materials under high pressure. A similar trend for all the materials studied in the present work, demonstrates that Suzuki formulation is not capable to yield compression behaviour of solids. The Shanker formulation improves the results obtained by the Suzuki formulation in small compression range (0.9<V/V₀<1). For further compressions Shanker formulation also fails. On the other hand, the Kumar formulation is found to work well for the entire range of pressure. The reasons for the failure of Suzuki and Shanker formulations are discussed.     

Charge density study under high pressure

The experimental and analytical method of the high-pressure powder experiment at BL10XU, SPring-8, is described. There is no doubt that BL10XU must be one of the most appropriate beam lines for high pressure X-ray diffraction experiment taking advantage of third generation synchrotron source. As an example of the advanced charge density study under high pressure, the structural change of Cs₂Au₂Br₆ by applying pressure is studied by Rietveld/MEM analysis. It reveals that the structural change of Cs₂Au₂Br₆ by applying pressure occurs basically at electron level, such as valence state change and chemical bonding, which may be called the electronic phase transition.     

Optical absorption of lithium metal vapor at high temperatures

Experimental results are reported for a unique spectroscopic device called the Plasma Spectroscopy Cell. Optical absorption of lithium metal vapor was observed at high density and temperature. Absorption spectra are analyzed using theoretical calculations of absorption cross sections for lithium-helium interactions, and singlet and triplet state transitions of diatomic lithium in the visible spectral range. This is believed to be the most complex example yet calculated in which absolute bound-bound, bound-free, free-bound, and free-free contributions for all possible optically allowed transitions are all included, in quite respectable agreement with experiment.     

On the role of the interface charge in non-ideal metal–semiconductor contacts

The bias dependent interface charge is considered as the origin of the observed non-ideality in current–voltage and capacitance–voltage characteristics. Using the simplified model for the interface electronic structure based on defects interacting with the continuum of interface states, the microscopic origin of empirical parameters describing the bias dependent interface charge function is investigated. The results show that in non-ideal metal–semiconductor contacts the interface charge function depends on the interface disorder parameter, density of defects, barrier pinning parameter and the effective gap center. The theoretical predictions are tested against several sets of published experimental data on bias dependent ideality factor and excess capacitance in various metal–semicoductor systems.     

地面附近的高空核爆电磁脉冲环境

 主要研究在高空核爆的双指数类型电磁脉冲平面波入射时，地面附近的电磁脉冲环境。计算给出了在不同入射波状态，不同地表介质电气特性和距地面不同高度等条件下的电磁脉冲环境参数，归纳了一些规律性认识。结果显示：地面附近的电场会随距地面高度的不同而发生显著的变化，对于水平场分量，其反射场总是试图抵消入射场，而对于垂直场分量，其反射场叠加在入射场上，使得地面附近的垂直场强幅值一般大于入射波场强幅值；当入射波仰角增大时，合成电场波形的脉冲宽度会变宽；地表介质的电气特性参数不同也会对地面附近电场的波形和幅值造成一定的影响。     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.