Generic Transport Aft-body Drag Reduction using Active Flow Control

Active flow-separation control is an effective and efficient mean for drag reduction and unsteady load alleviation resulting from locally or massively separated flow. Such a situation occurs in configurations where the aerodynamic performance is of secondary importance to functionality. The performance of heavy transport helicopters and aeroplanes, having a large, and almost flat, aft loading ramp suffer from the poor aerodynamics of the aft body. Hence, a combined experimental and numerical investigation was undertaken on a generic transport aeroplane/helicopter configuration. The experimental study provided surface pressures, direct drag measurements, surface and smoke flow visualization. The baseline flow was numerically analyzed, using finite volume solutions of the RANS equations. The baseline flow around the model was insensitive to the Reynolds number in the range it was tested. The flow separating from the aft body was characterized by two main sources of drag and unsteadiness. The first is a separation bubble residing at the lower ramp corner and the second is a pair of vortex systems developing and separating from the sides of the ramp. As the model incidence is decreased, the pair of vortex systems also penetrates deeper towards the centerline of the ramp, decreasing the pressure and increasing the drag. As expected, the ramp lower corner bubble was highly receptive to periodic excitation introduced from four addressable piezo-fluidic actuators situated at the ramp lower corner. Total drag was reduced by 3–11%, depending on the model incidence. There are indications that the flow in the wake of the model is also significantly steadier when the bubble at the lower ramp corner is eliminated. The vortex system is tighter and steadier when the ramp-corner bubble is eliminated.     

基于SPA的双枝模糊决策分析

将集对理论(SPA)与双枝模糊决策理论相结合,用集对分析的方法研究进行双枝模糊决策的方法,分别对双枝模糊决策因素域和双枝模糊决策的上枝、下枝和双枝进行了集对分析,给出了用SPA进行双枝模糊决策的性质,同时讨论了双枝模糊决策的动态分析方法,以及双枝模糊决策度强弱态势预测的方法,从而为双枝模糊决策理论的研究提供了新的视角和方法,为双枝模糊决策的应用提供了更方便的工具和更强的理论支持。     

关于K-拟可加模糊积分的几点注记

在K-拟可加模糊积分定义及积分转换定理的基础上，证明这种模糊积分恰好构成K-拟可加模糊测度，并依据积分转换定理讨论这种K-拟可加模糊积分的一些补充性质。     

Stratifiable Families of Extremals and Sufficient Conditions for Optimality in Optimal Control Problems

It is shown that, if a parametrized fämily of extremals F can be stratified in a way compatible with the flow map generated by F, then those trajectories of the family which realize the minimal values of the cost in F are indeed optimal in comparison with all trajectories which lie in the region R covered by the trajectories of F. It is not assumed that F is a field covering the state space injectively. As illustration, an optimal synthesis is constructed for a system where the flow of extremals exhibits a simple cusp singularity.     

Optimal Control of Magnetohydrodynamic Equations with State Constraint

This work is concerned with the maximum principle for optimal control problem governed by magnetohydrodynamic equations, which describe the motion of a viscous incompressible conducting fluid in a magnetic field and consist of a subtle coupling of the Navier-Stokes equation of viscous incompressible fluid flow and the Maxwell equation of electromagnetic field. An integral type state constraint is considered.     

Capture of an Ensemble of Microparticles in the Field of Laser Multibeam Interference

Capture of an ensemble of polymeric microspheres in a water suspension under the action of optical gradient forces in the field of interfering laser beams has been investigated for the case of two-, three-, and four-beam interference. The self-diffraction and diffraction of radiation on induced ordered spatial distribution of particles have been obtained.     

Pre—Separation Axioms in Fuzzifying Topology

1　 IntroductionYing[5,6 ] introduced and elementally developed so called fuzzifying topology with the semanticmethod of continuous valued L ogic.Shen[7] introduced and studied T0 -,T1-,T2 (Hausdorff) -,T3(regularity) -,T4 (normality) -separation axioms in fuzzifying topology.In [3 ]the concepts of thefamily of fuzzifying pre-open sets,fuzzifying pre-neighbourhood structure of a point and fuzzifyingpre-closure are introduced and studied.It is worth to mention that pre-separation axioms are …     

IMPULSIVE CONTROL OF A FISHERY SYSTEM

This paper uses the method of linear approximation for impulsive systems and gets a theorem which guarantees a fishery modei to be asymptotically stable at its equilibrium point and gives the ecological explanation.     

Three methods for analyzing forced vibration of a fluid-filled cylindrical shell

The forced vibration of an infinite elastic circular cylindrical shell filled with fluid is studied. Three methods are employed to analyze the forced vibration problem of this shell-fluid coupled system, that is, wave propagation approach (wave mode superposition), theorem of residues and a numerical integral method. In order to explain these methods more explicitly, before being used to investigate the vibration of an infinite fluid-filled elastic circular cylindrical shell, all these three methods are employed firstly to analyze the forced vibration problem of an infinite beam and an infinite elastic circular cylindrical shell in vacuo. Advantage and disadvantage of these three methods are discussed and their interesting relationship is revealed. That is, to any circumferential wavenumber and frequency of the external force, there is an unchangeable relationship between the general coordinates of various waves in the wave propagation approach and the residuals in the theorem of residues.     

Bilevel programming approach applied to the flow shop scheduling problem under fuzziness

This paper presents a fuzzy bilevel programming approach to solve the flow shop scheduling problem. The problem considered here differs from the standard form in that operators are assigned to the machines and imposing a hierarchy of two decision makers with fuzzy processing times. The shop owner considered higher level and assigns the jobs to the machines in order to minimize the flow time while the customer is the lower level and decides on a job schedule in order to minimize the makespan. In this paper, we use the concepts of tolerance membership function at each level to define a fuzzy decision model for generating optimal (satisfactory) solution for bilevel flow shop scheduling problem. A solution algorithm for solving this problem is given. Mathematics Subject Classification: 90C70, 90B36, 90C99