A new VOF‐based numerical scheme for the simulation of fluid flow with free surface. Part II: application to the cavity filling and sloshing problems

Finite element analysis of fluid flow with moving free surface has been performed in 2‐D and 3‐D. The new VOF‐based numerical algorithm that has been proposed by the present authors (Int. J. Numer. Meth. Fluids, submitted) was applied to several 2‐D and 3‐D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby‐cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2‐D and 3‐D cavity filling and sloshing problems in order to demonstrate the versatility and effectiveness of the scheme. The proposed numerical algorithm resolved successfully the free surfaces interacting with each other. The simulated results demonstrated applicability of the proposed numerical algorithm to the practical problems of large free surface motion. It has been also demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non‐uniform grid systems and can be extended to 3‐D free surface flow problems without additional efforts. Copyright © 2003 John Wiley & Sons, Ltd.     

光学系统光阑应用的实例

介绍了一种光学组合系统，通过构造光学系统虚拟的视场光阑实现人眼屈光度测量，它是光学系统光阑应用的生动实例.     

Electronic structures and ferroelectric properties of ABi2Ta2O9 (A=Ca, Sr, and Ba)

The electronic structures of ABi₂Ta₂O₉ (A=Ca, Sr, and Ba) were calculated by using first-principles under optimized structure. As the size of A-site cation decreases from that of Ba²⁺ to Ca²⁺, the band-gap between O 2p and Ta 5d increases from 2.0 to 2.9 eV, which responses to the stronger orbital hybridizations between Ta 5d and O 2p orbits favoring improvement of the ferroelectric property, decrease in leakage current, and increase in both spontaneous polarization and Curie temperature by the structural distortion. In contrast to CaBi₂Ta₂O₉ and SrBi₂Ta₂O₉, the hybridization between Ba 5p orbits and O 2p orbits in BaBi₂Ta₂O₉ has better structural stability.     

Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

Measurement of wire diameter by optical diffraction

A combined interference and diffraction pattern, in the form of equidistant interference fringes, resulting from illuminating a vertical metallic wire by a laser beam is analyzed to measure the diameter of four standard wires. The diameters range from 170 to 450 μm. It is found that the error in the diameter measurements increases for small metallic wires and for small distances between the wire and the screen due to scattering effects. The intensity of the incident laser beam was controlled by a pair of sheet polaroids to minimize the scattered radiation. The used technique is highly sensitive, but requires controlled environmental conditions and absence of vibration effects. The expanded uncertainty for k=2 is calculated and found to decrease from U(D)=±1.45 μm for the wire of nominal diameter 170 μm to ±0.57 μm for the diameter 450 μm.     

Heat Kernel and Hardy’s Theorem for Jacobi Transform

In this paper, the authors obtain sharp upper and lower hounds for the heat kernel associated with Jacobi transform, and get some analogues of Hardy‘s Theorem for Jacobi transform by using the sharp estimate of the heat kernel.     

Determination of the rheological behavior of epoxy–amine thermosets by dynamic mechanical analysis: Isothermal methods versus nonisothermal methods

The reticulation process of an epoxy resin using an amine as a cure agent was studied at different temperatures and concentrations of the cure agent with dynamic mechanical thermal analysis. The study was performed under both isothermal and nonisothermal conditions, and a temperature–time–transformation diagram was obtained. The measurements from the two modes gave similar results, although the nonisothermal mode required fewer experiments. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1965–1977, 2003     

Dihydroboronium derivatives of (S,S)-1,2-bis(t-butylmethylphosphino)ethane as convenient chiral ligand precursors

Dihydroboronium derivatives of (S,S)-1,2-bis(t-butylmethylphosphino)ethane (t-Bu-BisP*) were prepared and used as chiral diphosphine ligand precursors in Rh-catalyzed asymmetric hydrogenation of methyl (Z)-acetamidocinnamate to afford the hydrogenation product in up to 94% enantioselectivity.     

GM(1,1)改进模型及其应用

根据 GM( 1 ,1 )灰色模型的指数特性 ,通过在区间上求积分给出了关于背景值的一个比较确切的计算公式 ,讨论了由此建立的 GM( 1 ,1 )改进模型的适用范围和预测精度 .结果表明改进模型比原 GM( 1 ,1 )模型适用性要强、模拟和预测精度要高 ,不仅适用于低增长序列、也适用于高增长序列 ,不仅适用于短期预测 ,同样也适用于中、长期预测     

Relative intensity noise of mode-locked fiber grating external cavity semiconductor lasers

The noise of hybrid soliton pulse source (HSPS) with linearly chirped Gaussian apodized fiber Bragg grating is analyzed by couple-mode equations including spontaneous emission noise when the HSPS is mode-locked. Relative intensity noise is calculated using numerical solutions of these equations. It is shown that transform limited pulses are generated over a wide tuning range around the fundamental mode-locking frequency with low spontaneous noise. However, a high noise level affects the operation of device, and therefore transform-limited pulses are not obtainable over a wide tuning range. It is also shown that noise is extremely sensitive to the RF and DC currents, linewidth enhancement factor, gain saturation parameter and spontaneous coupling factor.